Digital Filters

The new technology advances provide that a great number of system signals can be easily measured with a low cost. The main problem is that usually only a fraction of the signal is useful for different purposes, for example maintenance, DVD-recorders, computers, electric/electronic circuits, econometric, optimization, etc. Digital filters are the most versatile, practical and effective methods for extracting the information necessary from the signal. They can be dynamic, so they can be automatically or manually adjusted to the external and internal conditions. Presented in this book are the most advanced digital filters including different case studies and the most relevant literature

IIR modeling of interpositional transfer functions with a genetic algorithm aided by an adaptive filter for the purpose of altering free-field sound localization

The psychoacoustic process of sound localization is a system of complex analysis. Scientists have found evidence that both binaural and monaural cues are responsible for determining the angles of elevation and azimuth which represent a sound source. Engineers have successfully used these cues to build mathematical localization systems. Research has indicated that spectral cues play an important role in 3-d localization. Therefore, it seems conceivable to design a filtering system which can alter the localization of a sound source, either for correctional purposes or listener preference. Such filters, known as Interpositional Transfer Functions, can be formed from division in the z-domain of Head-related Transfer Functions. HRTF’s represent the free-field response of the human body to sound processed by the ears. In filtering applications, the use of IIR filters is often favored over that of FIR filters due to their preservation of resolution while minimizing the number of required coefficients. Several methods exist for creating IIR filters from their representative FIR counterparts. For complicated filters, genetic algorithms (GAs) have proven effective. The research summarized in this thesis combines the past efforts of researchers in the fields of sound localization, genetic algorithms, and adaptive filtering. It represents the initial stage in the development of a practical system for future hardware implementation which uses a genetic algorithm as a driving engine. Under ideal conditions, an IIR filter design system has been demonstrated to successfully model several IPTF pairs which alter sound localization when applied to non-minimum phase HRTF’s obtained from free-field measurement

Digital Filters and Signal Processing

Digital filters, together with signal processing, are being employed in the new technologies and information systems, and are implemented in different areas and applications. Digital filters and signal processing are used with no costs and they can be adapted to different cases with great flexibility and reliability. This book presents advanced developments in digital filters and signal process methods covering different cases studies. They present the main essence of the subject, with the principal approaches to the most recent mathematical models that are being employed worldwide

Learning algorithms for adaptive digital filtering

In this thesis, we consider the problem of parameter optimisation in adaptive digital filtering. Adaptive digital filtering can be accomplished using both Finite Impulse Response (FIR) filters and Infinite Impulse Response Filters (IIR) filters. Adaptive FIR filtering algorithms are well established. However, the potential computational advantages of IIR filters has led to an increase in research on adaptive IIR filtering algorithms. These algorithms are studied in detail in this thesis and the limitations of current adaptive IIR filtering algorithms are identified. New approaches to adaptive IIR filtering using intelligent learning algorithms are proposed. These include Stochastic Learning Automata, Evolutionary Algorithms and Annealing Algorithms. Each of these techniques are used for the filtering problem and simulation results are presented showing the performance of the algorithms for adaptive IIR filtering. The relative merits and demerits of the different schemes are discussed. Two practical applications of adaptive IIR filtering are simulated and results of using the new adaptive strategies are presented. Other than the new approaches used, two new hybrid schemes are proposed based on concepts from genetic algorithms and annealing. It is shown with the help of simulation studies, that these hybrid schemes provide a superior performance to the exclusive use of any one scheme

KAVUAKA: a low-power application-specific processor architecture for digital hearing aids

The power consumption of digital hearing aids is very restricted due to their small physical size and the available hardware resources for signal processing are limited. However, there is a demand for more processing performance to make future hearing aids more useful and smarter. Future hearing aids should be able to detect, localize, and recognize target speakers in complex acoustic environments to further improve the speech intelligibility of the individual hearing aid user. Computationally intensive algorithms are required for this task. To maintain acceptable battery life, the hearing aid processing architecture must be highly optimized for extremely low-power consumption and high processing performance.The integration of application-specific instruction-set processors (ASIPs) into hearing aids enables a wide range of architectural customizations to meet the stringent power consumption and performance requirements. In this thesis, the application-specific hearing aid processor KAVUAKA is presented, which is customized and optimized with state-of-the-art hearing aid algorithms such as speaker localization, noise reduction, beamforming algorithms, and speech recognition. Specialized and application-specific instructions are designed and added to the baseline instruction set architecture (ISA). Among the major contributions are a multiply-accumulate (MAC) unit for real- and complex-valued numbers, architectures for power reduction during register accesses, co-processors and a low-latency audio interface. With the proposed MAC architecture, the KAVUAKA processor requires 16 % less cycles for the computation of a 128-point fast Fourier transform (FFT) compared to related programmable digital signal processors. The power consumption during register file accesses is decreased by 6 %to 17 % with isolation and by-pass techniques. The hardware-induced audio latency is 34 %lower compared to related audio interfaces for frame size of 64 samples.The final hearing aid system-on-chip (SoC) with four KAVUAKA processor cores and ten co-processors is integrated as an application-specific integrated circuit (ASIC) using a 40 nm low-power technology. The die size is 3.6 mm2. Each of the processors and co-processors contains individual customizations and hardware features with a varying datapath width between 24-bit to 64-bit. The core area of the 64-bit processor configuration is 0.134 mm2. The processors are organized in two clusters that share memory, an audio interface, co-processors and serial interfaces. The average power consumption at a clock speed of 10 MHz is 2.4 mW for SoC and 0.6 mW for the 64-bit processor.Case studies with four reference hearing aid algorithms are used to present and evaluate the proposed hardware architectures and optimizations. The program code for each processor and co-processor is generated and optimized with evolutionary algorithms for operation merging,instruction scheduling and register allocation. The KAVUAKA processor architecture is com-pared to related processor architectures in terms of processing performance, average power consumption, and silicon area requirements

Adaptive notch filtering for tracking multiple complex sinusoid signals

This thesis is related to the field of digital signal processing; where the aim of this research is to develop features of an infinite impulse response adaptive notch filter capable of tracking multiple complex sinusoid signals. Adaptive notch filters are commonly used in: Radar, Sonar, and Communication systems, and have the ability to track the frequencies of real or complex sinusoid signals; thus removing noise from an estimate, and enhancing the performance of a system. This research programme began by implementing four currently proposed adaptive notch structures. These structures were simulated and compared: for tracking between two and four signals; however, in their current form they are only capable of tracking real sinusoid signals. Next, one of these structures is developed further, to facilitate the ability to track complex sinusoid signals. This original structure gives superior performance over Regalia's comparable structure under certain conditions, which has been proven by simulations and results. Complex adaptive notch filter structures generally contain two parameters: the first tracks a target frequency, then the second controls the adaptive notch filter's bandwidth. This thesis develops the notch filter, so that the bandwidth parameter can be adapted via a method of steepest ascent; and also investigates tracking complex-valued chirp signals. Lastly, stochastic search methods are considered; and particle swarm optimisation has been applied to reinitialise an adaptive notch filter, when tracking two signals; thus more quickly locating an unknown frequency, after the frequency of the complex sinusoid signal jumps

A study on adaptive filtering for noise and echo cancellation.

The objective of this thesis is to investigate the adaptive filtering technique on the application of noise and echo cancellation. As a relatively new area in Digital Signal Processing (DSP), adaptive filters have gained a lot of popularity in the past several decades due to the advantages that they can deal with time-varying digital system and they do not require a priori knowledge of the statistics of the information to be processed. Adaptive filters have been successfully applied in a great many areas such as communications, speech processing, image processing, and noise/echo cancellation. Since Bernard Widrow and his colleagues introduced adaptive filter in the 1960s, many researchers have been working on noise/echo cancellation by using adaptive filters with different algorithms. Among these algorithms, normalized least mean square (NLMS) provides an efficient and robust approach, in which the model parameters are obtained on the base of mean square error (MSE). The choice of a structure for the adaptive filters also plays an important role on the performance of the algorithm as a whole. For this purpose, two different filter structures: finite impulse response (FIR) filter and infinite impulse response (IIR) filter have been studied. The adaptive processes with two kinds of filter structures and the aforementioned algorithm have been implemented and simulated using Matlab.Dept. of Electrical and Computer Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis2005 .J53. Source: Masters Abstracts International, Volume: 44-01, page: 0472. Thesis (M.A.Sc.)--University of Windsor (Canada), 2005