Machine Model Based Speed Estimation Schemes for Speed Encoderless Induction Motor Drives: a Survey

Speed Estimation without speed sensors is a complex phenomenon and is overly dependent on the machine parameters. It is all the more significant during low speed or near zero speed operation. There are several approaches to speed estimation of an induction motor. Eventually, they can be classified into two types, namely, estimation based on the machine model and estimation based on magnetic saliency and air gap space harmonics. This paper, through a brief literature survey, attempts to give an overview of the fundamentals and the current trends in various machine model based speed estimation techniques which have occupied and continue to occupy a great amount of research space

Machine model based Speed Estimation Schemes for Speed Encoderless Induction Motor Drives: A Survey

Speed Estimation without speed sensors is a complex phenomenon and is overly dependent on the machine parameters. It is all the more significant during low speed or near zero speed operation. There are several approaches to speed estimation of an induction motor. Eventually, they can be classified into two types, namely, estimation based on the machine model and estimation based on magnetic saliency and air gap space harmonics. This paper, through a brief literature survey, attempts to give an overview of the fundamentals and the current trends in various machine model based speed estimation techniques which have occupied and continue to occupy a great amount of research space

Vision-based neural network classifiers and their applications

A thesis submitted for the degree of Doctor of Philosophy of University of LutonVisual inspection of defects is an important part of quality assurance in many fields of production. It plays a very useful role in industrial applications in order to relieve human inspectors and improve the inspection accuracy and hence increasing productivity. Research has previously been done in defect classification of wood veneers using techniques such as neural networks, and a certain degree of success has been achieved. However, to improve results in tenus of both classification accuracy and running time are necessary if the techniques are to be widely adopted in industry, which has motivated this research. This research presents a method using rough sets based neural network with fuzzy input (RNNFI). Variable precision rough set (VPRS) method is proposed to remove redundant features utilising the characteristics of VPRS for data analysis and processing. The reduced data is fuzzified to represent the feature data in a more suitable foml for input to an improved BP neural network classifier. The improved BP neural network classifier is improved in three aspects: additional momentum, self-adaptive learning rates and dynamic error segmenting. Finally, to further consummate the classifier, a uniform design CUD) approach is introduced to optimise the key parameters because UD can generate a minimal set of uniform and representative design points scattered within the experiment domain. Optimal factor settings are achieved using a response surface (RSM) model and the nonlinear quadratic programming algorithm (NLPQL). Experiments have shown that the hybrid method is capable of classifying the defects of wood veneers with a fast convergence speed and high classification accuracy, comparing with other methods such as a neural network with fuzzy input and a rough sets based neural network. The research has demonstrated a methodology for visual inspection of defects, especially for situations where there is a large amount of data and a fast running speed is required. It is expected that this method can be applied to automatic visual inspection for production lines of other products such as ceramic tiles and strip steel

Identification and Control of Nonlinear Singularly Perturbed Systems Using Multi-time-scale Neural Networks

Many industrial systems are nonlinear with "slow" and "fast" dynamics because of the presence of some ``parasitic" parameters such as small time constants, resistances, inductances, capacitances, masses and moments of inertia. These systems are usually labeled as "singularly perturbed" or ``multi-time-scale" systems. Singular perturbation theory has been proved to be a useful tool to control and analyze singularly perturbed systems if the full knowledge of the system model parameters is available. However, the accurate and faithful mathematical models of those systems are usually difficult to obtain due to the uncertainties and nonlinearities. To obtain the accurate system models, in this research, a new identification scheme for the discrete time nonlinear singularly perturbed systems using multi-time-scale neural network and optimal bounded ellipsoid method is proposed firstly. Compared with other gradient descent based identification schemes, the new identification method proposed in this research can achieve faster convergence and higher accuracy due to the adaptively adjusted learning gain. Later, the optimal bounded ellipsoid based identification method for discrete time systems is extended to the identification of continuous singularly perturbed systems. Subsequently, by adding two additional terms in the weight's updating laws, a modified identification scheme is proposed to guarantee the effectiveness of the identification algorithm during the whole identification process. Lastly, through introducing some filtered variables, a robust neural network training algorithm is proposed for the system identification problem subjected to measurement noises. Based on the identification results, the singular perturbation theory is introduced to decompose a high order multi-time-scale system into two low order subsystems -- the reduced slow subsystem and the reduced fast subsystem. Then, two controllers are designed for the two subsystems separately. By using the singular perturbation theory, an adaptive controller for a regulation problem is designed in this research firstly. Because the system order is reduced, the adaptive controller proposed in this research has a simpler structure and requires much less computational resources, compared with other conventional controllers. Afterward, an indirect adaptive controller is proposed for solving the trajectory tracking problem. The stability of both identification and control schemes are analyzed through the Lyapunov approach, and the effectiveness of the identification and control algorithms are demonstrated using simulations and experiments

Precision Control of a Sensorless Brushless Direct Current Motor System

Sensorless control strategies were first suggested well over a decade ago with the aim of reducing the size, weight and unit cost of electrically actuated servo systems. The resulting algorithms have been successfully applied to the induction and synchronous motor families in applications where control of armature speeds above approximately one hundred revolutions per minute is desired. However, sensorless position control remains problematic. This thesis provides an in depth investigation into sensorless motor control strategies for high precision motion control applications. Specifically, methods of achieving control of position and very low speed thresholds are investigated. The developed grey box identification techniques are shown to perform better than their traditional white or black box counterparts. Further, fuzzy model based sliding mode control is implemented and results demonstrate its improved robustness to certain classes of disturbance. Attempts to reject uncertainty within the developed models using the sliding mode are discussed. Novel controllers, which enhance the performance of the sliding mode are presented. Finally, algorithms that achieve control without a primary feedback sensor are successfully demonstrated. Sensorless position control is achieved with resolutions equivalent to those of existing stepper motor technology. The successful control of armature speeds below sixty revolutions per minute is achieved and problems typically associated with motor starting are circumvented.Research Instruments Ltd

Energy Efficient Control and Fault Detection for HVAC Systems

The interest in HVAC (Heating, Ventilation and Air-Conditioning) technology has rapidly increased in the last years. HVAC systems have become important in the design of medium-large buildings in order to ensure thermal comfort in the environments with respect to the temperature and humidity of the air. Control, optimisation and maintenance procedures are fundamental in HVAC systems in order to guarantee people comfort and energy efficient solutions in their management. Two different topics are covered in this thesis. Energy Efficient Control of Ice Thermal Energy Storage Systems HVAC plants have recently begun to be matched with thermal energy storage systems. If properly designed, installed, and maintained, these systems can be used to store energy when its cost is low and exploiting it when the price increases. In particular, in HVAC cooling systems, a common thermal storage medium is ice. From a control and optimisation point of view, a cooling plant with ice storage proves to be a complex system. Standard control strategies seem not to be able to achieve the right trade-off between energy efficiency and demand satisfaction. In this thesis, in order to design efficient control strategies for storage systems, a HVAC model with ice storage is developed in a simulation environment. The thermal behaviour of the HVAC system is derived from the mass and energy conservation equations; in particular the ice storage is considered a hybrid system, thus taking into consideration both sensible and latent heat. Three standard control methods are compared with a non-linear predictive control strategy. The simulations results show that the implemented non-linear predictive control strategy provides the best control for the efficient energy management of ice storage systems. Fault Detection in HVAC Systems Operating problems associated with degraded equipment, poor maintenance, and improperly implemented controls, plague many HVAC systems. Fault detection methods can therefore play a key role in monitoring complex HVAC plants, detecting anomalous behaviours in such a way as to keep the systems in their best operational conditions with minimum costs. In this thesis, fault detection and diagnosis methods on variable air volume (VAV) systems are first designed. To this aim, a VAV system model with two zones is developed; the control of system is obtained with a direct feedback linearisation technique. Supervised classification methods are used to detect and diagnose the simulated faults in the model. The simulations results show the good performances of the classification in the detection and diagnosis of the most common faults in VAV systems. Detection methods are then developed for the most relevant faults affecting chillers. To this aim, data collected in the research project 1043-RP promoted by ASHRAE (American Society of Heating, Refrigerating and Air Conditioning Engineers) are used. In this project experimental studies were conducted on a centrifugal water-cooled chiller in order to collect data in both normal and faulty situations. The developed technique is based on one-class classification methods with a novelty detection approach, where only normal data are used to characterize the correct system behaviour. The classification results confirm the effectiveness of the proposed method for the detection of the most common faults in chillers

Advanced Strategies for Robot Manipulators

Amongst the robotic systems, robot manipulators have proven themselves to be of increasing importance and are widely adopted to substitute for human in repetitive and/or hazardous tasks. Modern manipulators are designed complicatedly and need to do more precise, crucial and critical tasks. So, the simple traditional control methods cannot be efficient, and advanced control strategies with considering special constraints are needed to establish. In spite of the fact that groundbreaking researches have been carried out in this realm until now, there are still many novel aspects which have to be explored