Resiliency in numerical algorithm design for extreme scale simulations

This work is based on the seminar titled ‘Resiliency in Numerical Algorithm Design for Extreme Scale Simulations’ held March 1–6, 2020, at Schloss Dagstuhl, that was attended by all the authors. Advanced supercomputing is characterized by very high computation speeds at the cost of involving an enormous amount of resources and costs. A typical large-scale computation running for 48 h on a system consuming 20 MW, as predicted for exascale systems, would consume a million kWh, corresponding to about 100k Euro in energy cost for executing 1023 floating-point operations. It is clearly unacceptable to lose the whole computation if any of the several million parallel processes fails during the execution. Moreover, if a single operation suffers from a bit-flip error, should the whole computation be declared invalid? What about the notion of reproducibility itself: should this core paradigm of science be revised and refined for results that are obtained by large-scale simulation? Naive versions of conventional resilience techniques will not scale to the exascale regime: with a main memory footprint of tens of Petabytes, synchronously writing checkpoint data all the way to background storage at frequent intervals will create intolerable overheads in runtime and energy consumption. Forecasts show that the mean time between failures could be lower than the time to recover from such a checkpoint, so that large calculations at scale might not make any progress if robust alternatives are not investigated. More advanced resilience techniques must be devised. The key may lie in exploiting both advanced system features as well as specific application knowledge. Research will face two essential questions: (1) what are the reliability requirements for a particular computation and (2) how do we best design the algorithms and software to meet these requirements? While the analysis of use cases can help understand the particular reliability requirements, the construction of remedies is currently wide open. One avenue would be to refine and improve on system- or application-level checkpointing and rollback strategies in the case an error is detected. Developers might use fault notification interfaces and flexible runtime systems to respond to node failures in an application-dependent fashion. Novel numerical algorithms or more stochastic computational approaches may be required to meet accuracy requirements in the face of undetectable soft errors. These ideas constituted an essential topic of the seminar. The goal of this Dagstuhl Seminar was to bring together a diverse group of scientists with expertise in exascale computing to discuss novel ways to make applications resilient against detected and undetected faults. In particular, participants explored the role that algorithms and applications play in the holistic approach needed to tackle this challenge. This article gathers a broad range of perspectives on the role of algorithms, applications and systems in achieving resilience for extreme scale simulations. The ultimate goal is to spark novel ideas and encourage the development of concrete solutions for achieving such resilience holistically.Peer Reviewed"Article signat per 36 autors/es: Emmanuel Agullo, Mirco Altenbernd, Hartwig Anzt, Leonardo Bautista-Gomez, Tommaso Benacchio, Luca Bonaventura, Hans-Joachim Bungartz, Sanjay Chatterjee, Florina M. Ciorba, Nathan DeBardeleben, Daniel Drzisga, Sebastian Eibl, Christian Engelmann, Wilfried N. Gansterer, Luc Giraud, Dominik G ̈oddeke, Marco Heisig, Fabienne Jezequel, Nils Kohl, Xiaoye Sherry Li, Romain Lion, Miriam Mehl, Paul Mycek, Michael Obersteiner, Enrique S. Quintana-Ortiz, Francesco Rizzi, Ulrich Rude, Martin Schulz, Fred Fung, Robert Speck, Linda Stals, Keita Teranishi, Samuel Thibault, Dominik Thonnes, Andreas Wagner and Barbara Wohlmuth"Postprint (author's final draft

Adaptive control in rollforward recovery for extreme scale multigrid

With the increasing number of compute components, failures in future exa-scale computer systems are expected to become more frequent. This motivates the study of novel resilience techniques. Here, we extend a recently proposed algorithm-based recovery method for multigrid iterations by introducing an adaptive control. After a fault, the healthy part of the system continues the iterative solution process, while the solution in the faulty domain is re-constructed by an asynchronous on-line recovery. The computations in both the faulty and healthy subdomains must be coordinated in a sensitive way, in particular, both under and over-solving must be avoided. Both of these waste computational resources and will therefore increase the overall time-to-solution. To control the local recovery and guarantee an optimal re-coupling, we introduce a stopping criterion based on a mathematical error estimator. It involves hierarchical weighted sums of residuals within the context of uniformly refined meshes and is well-suited in the context of parallel high-performance computing. The re-coupling process is steered by local contributions of the error estimator. We propose and compare two criteria which differ in their weights. Failure scenarios when solving up to $6.9\cdot10^{11}$ unknowns on more than 245\,766 parallel processes will be reported on a state-of-the-art peta-scale supercomputer demonstrating the robustness of the method

Software for Exascale Computing - SPPEXA 2016-2019

This open access book summarizes the research done and results obtained in the second funding phase of the Priority Program 1648 "Software for Exascale Computing" (SPPEXA) of the German Research Foundation (DFG) presented at the SPPEXA Symposium in Dresden during October 21-23, 2019. In that respect, it both represents a continuation of Vol. 113 in Springer’s series Lecture Notes in Computational Science and Engineering, the corresponding report of SPPEXA’s first funding phase, and provides an overview of SPPEXA’s contributions towards exascale computing in today's sumpercomputer technology. The individual chapters address one or more of the research directions (1) computational algorithms, (2) system software, (3) application software, (4) data management and exploration, (5) programming, and (6) software tools. The book has an interdisciplinary appeal: scholars from computational sub-fields in computer science, mathematics, physics, or engineering will find it of particular interest

teaMPI---replication-based resiliency without the (performance) pain.

In an era where we can not afford to checkpoint frequently, replication is a generic way forward to construct numerical simulations that can continue to run even if hardware parts fail. Yet, replication often is not employed on larger scales, as naïvely mirroring a computation once effectively halves the machine size, and as keeping replicated simulations consistent with each other is not trivial. We demonstrate for the ExaHyPE engine—a task-based solver for hyperbolic equation systems—that it is possible to realise resiliency without major code changes on the user side, while we introduce a novel algorithmic idea where replication reduces the time-to-solution. The redundant CPU cycles are not burned “for nothing”. Our work employs a weakly consistent data model where replicas run independently yet inform each other through heartbeat messages whether they are still up and running. Our key performance idea is to let the tasks of the replicated simulations share some of their outcomes, while we shuffle the actual task execution order per replica. This way, replicated ranks can skip some local computations and automatically start to synchronise with each other. Our experiments with a production-level seismic wave-equation solver provide evidence that this novel concept has the potential to make replication affordable for large-scale simulations in high-performance computing

Scaling and Resilience in Numerical Algorithms for Exascale Computing

The first Petascale supercomputer, the IBM Roadrunner, went online in 2008. Ten years later, the community is now looking ahead to a new generation of Exascale machines. During the decade that has passed, several hundred Petascale capable machines have been installed worldwide, yet despite the abundance of machines, applications that scale to their full size remain rare. Large clusters now routinely have 50.000+ cores, some have several million. This extreme level of parallelism, that has allowed a theoretical compute capacity in excess of a million billion operations per second, turns out to be difficult to use in many applications of practical interest. Processors often end up spending more time waiting for synchronization, communication, and other coordinating operations to complete, rather than actually computing. Component reliability is another challenge facing HPC developers. If even a single processor fail, among many thousands, the user is forced to restart traditional applications, wasting valuable compute time. These issues collectively manifest themselves as low parallel efficiency, resulting in waste of energy and computational resources. Future performance improvements are expected to continue to come in large part due to increased parallelism. One may therefore speculate that the difficulties currently faced, when scaling applications to Petascale machines, will progressively worsen, making it difficult for scientists to harness the full potential of Exascale computing. The thesis comprises two parts. Each part consists of several chapters discussing modifications of numerical algorithms to make them better suited for future Exascale machines. In the first part, the use of Parareal for Parallel-in-Time integration techniques for scalable numerical solution of partial differential equations is considered. We propose a new adaptive scheduler that optimize the parallel efficiency by minimizing the time-subdomain length without making communication of time-subdomains too costly. In conjunction with an appropriate preconditioner, we demonstrate that it is possible to obtain time-parallel speedup on the nonlinear shallow water equation, beyond what is possible using conventional spatial domain-decomposition techniques alone. The part is concluded with the proposal of a new method for constructing Parallel-in-Time integration schemes better suited for convection dominated problems. In the second part, new ways of mitigating the impact of hardware failures are developed and presented. The topic is introduced with the creation of a new fault-tolerant variant of Parareal. In the chapter that follows, a C++ Library for multi-level checkpointing is presented. The library uses lightweight in-memory checkpoints, protected trough the use of erasure codes, to mitigate the impact of failures by decreasing the overhead of checkpointing and minimizing the compute work lost. Erasure codes have the unfortunate property that if more data blocks are lost than parity codes created, the data is effectively considered unrecoverable. The final chapter contains a preliminary study on partial information recovery for incomplete checksums. Under the assumption that some meta knowledge exists on the structure of the data encoded, we show that the data lost may be recovered, at least partially. This result is of interest not only in HPC but also in data centers where erasure codes are widely used to protect data efficiently

Dependable Embedded Systems

This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems

Profile-driven parallelisation of sequential programs

Traditional parallelism detection in compilers is performed by means of static analysis and more specifically data and control dependence analysis. The information that is available at compile time, however, is inherently limited and therefore restricts the parallelisation opportunities. Furthermore, applications written in C – which represent the majority of today’s scientific, embedded and system software – utilise many lowlevel features and an intricate programming style that forces the compiler to even more conservative assumptions. Despite the numerous proposals to handle this uncertainty at compile time using speculative optimisation and parallelisation, the software industry still lacks any pragmatic approaches that extracts coarse-grain parallelism to exploit the multiple processing units of modern commodity hardware. This thesis introduces a novel approach for extracting and exploiting multiple forms of coarse-grain parallelism from sequential applications written in C. We utilise profiling information to overcome the limitations of static data and control-flow analysis enabling more aggressive parallelisation. Profiling is performed using an instrumentation scheme operating at the Intermediate Representation (Ir) level of the compiler. In contrast to existing approaches that depend on low-level binary tools and debugging information, Ir-profiling provides precise and direct correlation of profiling information back to the Ir structures of the compiler. Additionally, our approach is orthogonal to existing automatic parallelisation approaches and additional fine-grain parallelism may be exploited. We demonstrate the applicability and versatility of the proposed methodology using two studies that target different forms of parallelism. First, we focus on the exploitation of loop-level parallelism that is abundant in many scientific and embedded applications. We evaluate our parallelisation strategy against the Nas and Spec Fp benchmarks and two different multi-core platforms (a shared-memory Intel Xeon Smp and a heterogeneous distributed-memory Ibm Cell blade). Empirical evaluation shows that our approach not only yields significant improvements when compared with state-of- the-art parallelising compilers, but comes close to and sometimes exceeds the performance of manually parallelised codes. On average, our methodology achieves 96% of the performance of the hand-tuned parallel benchmarks on the Intel Xeon platform, and a significant speedup for the Cell platform. The second study, addresses the problem of partially sequential loops, typically found in implementations of multimedia codecs. We develop a more powerful whole-program representation based on the Program Dependence Graph (Pdg) that supports profiling, partitioning and codegeneration for pipeline parallelism. In addition we demonstrate how this enhances conventional pipeline parallelisation by incorporating support for multi-level loops and pipeline stage replication in a uniform and automatic way. Experimental results using a set of complex multimedia and stream processing benchmarks confirm the effectiveness of the proposed methodology that yields speedups up to 4.7 on a eight-core Intel Xeon machine