18,970 research outputs found

    Modeling the Impact of Process Variation on Resistive Bridge Defects

    No full text
    Recent research has shown that tests generated without taking process variation into account may lead to loss of test quality. At present there is no efficient device-level modeling technique that models the effect of process variation on resistive bridges. This paper presents a fast and accurate technique to model the effect of process variation on resistive bridge defects. The proposed model is implemented in two stages: firstly, it employs an accurate transistor model (BSIM4) to calculate the critical resistance of a bridge; secondly, the effect of process variation is incorporated in this model by using three transistor parameters: gate length (L), threshold voltage (V) and effective mobility (ueff) where each follow Gaussian distribution. Experiments are conducted on a 65-nm gate library (for illustration purposes), and results show that on average the proposed modeling technique is more than 7 times faster and in the worst case, error in bridge critical resistance is 0.8% when compared with HSPICE

    On testing VLSI chips for the big Viterbi decoder

    Get PDF
    A general technique that can be used in testing very large scale integrated (VLSI) chips for the Big Viterbi Decoder (BVD) system is described. The test technique is divided into functional testing and fault-coverage testing. The purpose of functional testing is to verify that the design works functionally. Functional test vectors are converted from outputs of software simulations which simulate the BVD functionally. Fault-coverage testing is used to detect and, in some cases, to locate faulty components caused by bad fabrication. This type of testing is useful in screening out bad chips. Finally, design for testability, which is included in the BVD VLSI chip design, is described in considerable detail. Both the observability and controllability of a VLSI chip are greatly enhanced by including the design for the testability feature

    What is the Path to Fast Fault Simulation?

    Get PDF
    Motivated by the recent advances in fast fault simulation techniques for large combinational circuits, a panel discussion has been organized for the 1988 International Test Conference. This paper is a collective account of the position statements offered by the panelists

    Influence of parasitic capacitance variations on 65 nm and 32 nm predictive technology model SRAM core-cells

    Get PDF
    The continuous improving of CMOS technology allows the realization of digital circuits and in particular static random access memories that, compared with previous technologies, contain an impressive number of transistors. The use of new production processes introduces a set of parasitic effects that gain more and more importance with the scaling down of the technology. In particular, even small variations of parasitic capacitances in CMOS devices are expected to become an additional source of faulty behaviors in future technologies. This paper analyzes and compares the effect of parasitic capacitance variations in a SRAM memory circuit realized with 65 nm and 32 nm predictive technology model

    Optimising Simulation Data Structures for the Xeon Phi

    Get PDF
    In this paper, we propose a lock-free architecture to accelerate logic gate circuit simulation using SIMD multi-core machines. We evaluate its performance on different test circuits simulated on the Intel Xeon Phi and 2 other machines. Comparisons are presented of this software/hardware combination with reported performances of GPU and other multi-core simulation platforms. Comparisons are also given between the lock free architecture and a leading commercial simulator running on the same Intel hardware

    Automatic programming methodologies for electronic hardware fault monitoring

    Get PDF
    This paper presents three variants of Genetic Programming (GP) approaches for intelligent online performance monitoring of electronic circuits and systems. Reliability modeling of electronic circuits can be best performed by the Stressor - susceptibility interaction model. A circuit or a system is considered to be failed once the stressor has exceeded the susceptibility limits. For on-line prediction, validated stressor vectors may be obtained by direct measurements or sensors, which after pre-processing and standardization are fed into the GP models. Empirical results are compared with artificial neural networks trained using backpropagation algorithm and classification and regression trees. The performance of the proposed method is evaluated by comparing the experiment results with the actual failure model values. The developed model reveals that GP could play an important role for future fault monitoring systems.This research was supported by the International Joint Research Grant of the IITA (Institute of Information Technology Assessment) foreign professor invitation program of the MIC (Ministry of Information and Communication), Korea

    The Art of Fault Injection

    Get PDF
    Classical greek philosopher considered the foremost virtues to be temperance, justice, courage, and prudence. In this paper we relate these cardinal virtues to the correct methodological approaches that researchers should follow when setting up a fault injection experiment. With this work we try to understand where the "straightforward pathway" lies, in order to highlight those common methodological errors that deeply influence the coherency and the meaningfulness of fault injection experiments. Fault injection is like an art, where the success of the experiments depends on a very delicate balance between modeling, creativity, statistics, and patience
    corecore