Fault simulation for structural testing of analogue integrated circuits

In this thesis the ANTICS analogue fault simulation software is described which provides a statistical approach to fault simulation for accurate analogue IC test evaluation. The traditional figure of fault coverage is replaced by the average probability of fault detection. This is later refined by considering the probability of fault occurrence to generate a more realistic, weighted test metric. Two techniques to reduce the fault simulation time are described, both of which show large reductions in simulation time with little loss of accuracy. The final section of the thesis presents an accurate comparison of three test techniques and an evaluation of dynamic supply current monitoring. An increase in fault detection for dynamic supply current monitoring is obtained by removing the DC component of the supply current prior to measurement

Symbolic tolerance and sensitivity analysis of large scale electronic circuits

Available from British Library Document Supply Centre-DSC:DXN029693 / BLDSC - British Library Document Supply CentreSIGLEGBUnited Kingdo

A Holistic Approach to Functional Safety for Networked Cyber-Physical Systems

Functional safety is a significant concern in today's networked cyber-physical systems such as connected machines, autonomous vehicles, and intelligent environments. Simulation is a well-known methodology for the assessment of functional safety. Simulation models of networked cyber-physical systems are very heterogeneous relying on digital hardware, analog hardware, and network domains. Current functional safety assessment is mainly focused on digital hardware failures while minor attention is devoted to analog hardware and not at all to the interconnecting network. In this work we believe that in networked cyber-physical systems, the dependability must be verified not only for the nodes in isolation but also by taking into account their interaction through the communication channel. For this reason, this work proposes a holistic methodology for simulation-based safety assessment in which safety mechanisms are tested in a simulation environment reproducing the high-level behavior of digital hardware, analog hardware, and network communication. The methodology relies on three main automatic processes: 1) abstraction of analog models to transform them into system-level descriptions, 2) synthesis of network infrastructures to combine multiple cyber-physical systems, and 3) multi-domain fault injection in digital, analog, and network. Ultimately, the flow produces a homogeneous optimized description written in C++ for fast and reliable simulation which can have many applications. The focus of this thesis is performing extensive fault simulation and evaluating different functional safety metrics, \eg, fault and diagnostic coverage of all the safety mechanisms

Modelling methods for testability analysis of analog integrated circuits based on pole-zero analysis

Testability analysis for analog circuits provides valuable information for designers and test engineers. Such information includes a number of testable and nontestable elements of a circuit, ambiguity groups, and nodes to be tested. This information is useful for solving the fault diagnosis problem. In order to verify the functionality of analog circuits, a large number of specifications have to be checked. However, checking all circuit specifications can result in prohibitive testing times on expensive automated test equipment. Therefore, the test engineer has to select a finite subset of specifications to be measured. This subset of specifications must result in reducing the test time and guaranteeing that no faulty chips are shipped. This research develops a novel methodology for testability analysis of linear analog circuits based on pole-zero analysis and on pole-zero sensitivity analysis. Based on this methodology, a new interpretation of ambiguity groups is provided relying on the circuit theory. The testability analysis methodology can be employed as a guideline for constructing fault diagnosis equations and for selecting the test nodes. We have also proposed an algorithm for selecting specifications that need to be measured. The element testability concept will be introduced. This concept provides the degree of difficulty in testing circuit elements. The value of the element testability can easily be obtained using the pole sensitivities. Then, specifications which need to be measured can be selected based on this concept. Consequently, the selected measurements can be utilized for reducing the test time without sacrificing the fault coverage and maximizing the information for fault diagnosis

Learning Approaches to Analog and Mixed Signal Verification and Analysis

The increased integration and interaction of analog and digital components within a system has amplified the need for a fast, automated, combined analog, and digital verification methodology. There are many automated characterization, test, and verification methods used in practice for digital circuits, but analog and mixed signal circuits suffer from long simulation times brought on by transistor-level analysis. Due to the substantial amount of simulations required to properly characterize and verify an analog circuit, many undetected issues manifest themselves in the manufactured chips. Creating behavioral models, a circuit abstraction of analog components assists in reducing simulation time which allows for faster exploration of the design space. Traditionally, creating behavioral models for non-linear circuits is a manual process which relies heavily on design knowledge for proper parameter extraction and circuit abstraction. Manual modeling requires a high level of circuit knowledge and often fails to capture critical effects stemming from block interactions and second order device effects. For this reason, it is of interest to extract the models directly from the SPICE level descriptions so that these effects and interactions can be properly captured. As the devices are scaled, process variations have a more profound effect on the circuit behaviors and performances. Creating behavior models from the SPICE level descriptions, which include input parameters and a large process variation space, is a non-trivial task. In this dissertation, we focus on addressing various problems related to the design automation of analog and mixed signal circuits. Analog circuits are typically highly specialized and fined tuned to fit the desired specifications for any given system reducing the reusability of circuits from design to design. This hinders the advancement of automating various aspects of analog design, test, and layout. At the core of many automation techniques, simulations, or data collection are required. Unfortunately, for some complex analog circuits, a single simulation may take many days. This prohibits performing any type of behavior characterization or verification of the circuit. This leads us to the first fundamental problem with the automation of analog devices. How can we reduce the simulation cost while maintaining the robustness of transistor level simulations? As analog circuits can vary vastly from one design to the next and are hardly ever comprised of standard library based building blocks, the second fundamental question is how to create automated processes that are general enough to be applied to all or most circuit types? Finally, what circuit characteristics can we utilize to enhance the automation procedures? The objective of this dissertation is to explore these questions and provide suitable evidence that they can be answered. We begin by exploring machine learning techniques to model the design space using minimal simulation effort. Circuit partitioning is employed to reduce the complexity of the machine learning algorithms. Using the same partitioning algorithm we further explore the behavior characterization of analog circuits undergoing process variation. The circuit partitioning is general enough to be used by any CMOS based analog circuit. The ideas and learning gained from behavioral modeling during behavior characterization are used to improve the simulation through event propagation, input space search, complexity and information measurements. The reduction of the input space and behavioral modeling of low complexity, low information primitive elements reduces the simulation time of large analog and mixed signal circuits by 50-75%. The method is extended and applied to assist in analyzing analog circuit layout. All of the proposed methods are implemented on analog circuits ranging from small benchmark circuits to large, highly complex and specialized circuits. The proposed dependency based partitioning of large analog circuits in the time domain allows for fast identification of highly sensitive transistors as well as provides a natural division of circuit components. Modeling analog circuits in the time domain with this partitioning technique and SVM learning algorithms allows for very fast transient behavior predictions, three orders of magnitude faster than traditional simulators, while maintaining 95% accuracy. Analog verification can be explored through a reduction of simulation time by utilizing the partitions, information and complexity measures, and input space reduction. Behavioral models are created using supervised learning techniques for detected primitive elements. We will show the effectiveness of the method on four analog circuits where the simulation time is decreased by 55-75%. Utilizing the reduced simulation method, critical nodes can be found quickly and efficiently. The nodes found using this method match those found by an experienced layout engineer, but are detected automatically given the design and input specifications. The technique is further extended to find the tolerance of transistors to both process variation and power supply fluctuation. This information allows for corrections in layout overdesign or guidance in placing noise reducing components such as guard rings or decoupling capacitors. The proposed approaches significantly reduce the simulation time required to perform the tasks traditionally, maintain high accuracy, and can be automated

NASA SERC 1990 Symposium on VLSI Design

This document contains papers presented at the first annual NASA Symposium on VLSI Design. NASA's involvement in this event demonstrates a need for research and development in high performance computing. High performance computing addresses problems faced by the scientific and industrial communities. High performance computing is needed in: (1) real-time manipulation of large data sets; (2) advanced systems control of spacecraft; (3) digital data transmission, error correction, and image compression; and (4) expert system control of spacecraft. Clearly, a valuable technology in meeting these needs is Very Large Scale Integration (VLSI). This conference addresses the following issues in VLSI design: (1) system architectures; (2) electronics; (3) algorithms; and (4) CAD tools

Constraint-driven RF test stimulus generation and built-in test

With the explosive growth in wireless applications, the last decade witnessed an ever-increasing test challenge for radio frequency (RF) circuits. While the design community has pushed the envelope far into the future, by expanding CMOS process to be used with high-frequency wireless devices, test methodology has not advanced at the same pace. Consequently, testing such devices has become a major bottleneck in high-volume production, further driven by the growing need for tighter quality control. RF devices undergo testing during the prototype phase and during high-volume manufacturing (HVM). The benchtop test equipment used throughout prototyping is very precise yet specialized for a subset of functionalities. HVM calls for a different kind of test paradigm that emphasizes throughput and sufficiency, during which the projected performance parameters are measured one by one for each device by automated test equipment (ATE) and compared against defined limits called specifications. The set of tests required for each product differs greatly in terms of the equipment required and the time taken to test individual devices. Together with signal integrity, precision, and repeatability concerns, the initial cost of RF ATE is prohibitively high. As more functionality and protocols are integrated into a single RF device, the required number of specifications to be tested also increases, adding to the overall cost of testing, both in terms of the initial and recurring operating costs. In addition to the cost problem, RF testing proposes another challenge when these components are integrated into package-level system solutions. In systems-on-packages (SOP), the test problems resulting from signal integrity, input/output bandwidth (IO), and limited controllability and observability have initiated a paradigm shift in high-speed analog testing, favoring alternative approaches such as built-in tests (BIT) where the test functionality is brought into the package. This scheme can make use of a low-cost external tester connected through a low-bandwidth link in order to perform demanding response evaluations, as well as make use of the analog-to-digital converters and the digital signal processors available in the package to facilitate testing. Although research on analog built-in test has demonstrated hardware solutions for single specifications, the paradigm shift calls for a rather general approach in which a single methodology can be applied across different devices, and multiple specifications can be verified through a single test hardware unit, minimizing the area overhead. Specification-based alternate test methodology provides a suitable and flexible platform for handling the challenges addressed above. In this thesis, a framework that integrates ATE and system constraints into test stimulus generation and test response extraction is presented for the efficient production testing of high-performance RF devices using specification-based alternate tests. The main components of the presented framework are as follows: Constraint-driven RF alternate test stimulus generation: An automated test stimulus generation algorithm for RF devices that are evaluated by a specification-based alternate test solution is developed. The high-level models of the test signal path define constraints in the search space of the optimized test stimulus. These models are generated in enough detail such that they inherently define limitations of the low-cost ATE and the I/O restrictions of the device under test (DUT), yet they are simple enough that the non-linear optimization problem can be solved empirically in a reasonable amount of time. Feature extractors for BIT: A methodology for the built-in testing of RF devices integrated into SOPs is developed using additional hardware components. These hardware components correlate the high-bandwidth test response to low bandwidth signatures while extracting the test-critical features of the DUT. Supervised learning is used to map these extracted features, which otherwise are too complicated to decipher by plain mathematical analysis, into the specifications under test. Defect-based alternate testing of RF circuits: A methodology for the efficient testing of RF devices with low-cost defect-based alternate tests is developed. The signature of the DUT is probabilistically compared with a class of defect-free device signatures to explore possible corners under acceptable levels of process parameter variations. Such a defect filter applies discrimination rules generated by a supervised classifier and eliminates the need for a library of possible catastrophic defects.Ph.D.Committee Chair: Chatterjee, Abhijit; Committee Member: Durgin, Greg; Committee Member: Keezer, David; Committee Member: Milor, Linda; Committee Member: Sitaraman, Sures

Engineering Education and Research Using MATLAB

MATLAB is a software package used primarily in the field of engineering for signal processing, numerical data analysis, modeling, programming, simulation, and computer graphic visualization. In the last few years, it has become widely accepted as an efficient tool, and, therefore, its use has significantly increased in scientific communities and academic institutions. This book consists of 20 chapters presenting research works using MATLAB tools. Chapters include techniques for programming and developing Graphical User Interfaces (GUIs), dynamic systems, electric machines, signal and image processing, power electronics, mixed signal circuits, genetic programming, digital watermarking, control systems, time-series regression modeling, and artificial neural networks