Smart Monitoring of Manufacturing Systems for Automated Decision-Making: A Multi-Method Framework

Smart monitoring plays a principal role in the intelligent automation of manufacturing systems. Advanced data collection technologies, like sensors, have been widely used to facilitate real-time data collection. Computationally efficient analysis of the operating systems, however, remains relatively underdeveloped and requires more attention. Inspired by the capabilities of signal analysis and information visualization, this study proposes a multi-method framework for the smart monitoring of manufacturing systems and intelligent decision-making. The proposed framework uses the machine signals collected by noninvasive sensors for processing. For this purpose, the signals are filtered and classified to facilitate the realization of the operational status and performance measures to advise the appropriate course of managerial actions considering the detected anomalies. Numerical experiments based on real data are used to show the practicability of the developed monitoring framework. Results are supportive of the accuracy of the method. Applications of the developed approach are worthwhile research topics to research in other manufacturing environments

Diagnosing Localized and Distributed Bearing Faults by Bearing Noise Signal Using Machine Learning and Kurstogram

Bearings are a common component and crucial to most rotating machinery. Their failures are the causes for more than half of the total machine failures, each with the potential to cause extreme damage, injury, and downtime. Therefore, fault detection through condition monitoring has a significant importance. Since the initial cost of standard condition monitoring techniques such as vibration signature analysis is high and has a long payback period, the condition monitoring via audio signal processing is proposed for both localized faults and distributed/ generalized roughness faults in the rolling bearing. It is not appropriate to analyze bearing faults using Fast Fourier Transform (FFT) of the noise signal of bearing since localized faults are Amplitude Modulated (AM) and mixed up with background noises. Localized faults are processed using Kurstogram technique for finding the appropriate filtering band because localized faulty bearings produce impulsive signal

Power quality disturbances assessment during unintentional islanding scenarios. A contribution to voltage sag studies

This paper presents a novel voltage sag topology that occurs during an unintentional islanding operation (IO) within a distribution network (DN) due to large induction motors (IMs). When a fault occurs, following the circuit breaker (CB) fault clearing, transiently, the IMs act as generators due to their remanent kinetic energy until the CB reclosing takes place. This paper primarily contributes to voltage sag characterization. Therefore, this novel topology is presented, analytically modelled and further validated. It is worth mentioning that this voltage sag has been identified in a real DN in which events have been recorded for two years. The model validation of the proposed voltage sag is done via digital simulations with a model of the real DN implemented in Matlab considering a wide range of scenarios. Both simulations and field measurements confirm the voltage sag analytical expression presented in this paper as well as exhibiting the high accuracy achieved in the three-phase model adopted.Postprint (published version

Characterization of brushed DC motor with brush fault using thermal assessment

Direct current motors (DC motor) are used in the small electric devices commonly. Brushed DC motors are cheap and easy to install, thus their popularity. Although the popularity, faults occur which make diagnosis and detection of faults very important. It avoids financial loss and unexpected shutdown operation causes by these faults. This paper is a present characterization of brushed DC motor with brush fault using thermal signature analysis. To organize the character, the temperature profile of DC motor was analysed using the K-type thermocouple with data logger. The thermocouples were mounted on 4 part of the DC motor, casing, permanent magnet, brush and bearing. The temperature data of DC motor with faulty brush and healthy DC motor were measured by thermocouple and recorded using data logger in real time until steady state temperature, under different load. The analysis on the steady state temperature of brush fault can be conclude through recognisable of characteristics temperature difference with a healthy motor

Development of algorithms of statistical signal processing for the detection and pattern recognitionin time series. Application to the diagnosis of electrical machines and to the features extraction in Actigraphy signals

Tesis por compendio[ES] En la actualidad, el desarrollo y aplicación de algoritmos para el reconocimiento de patrones que mejoren los niveles de rendimiento, detección y procesamiento de datos en diferentes áreas del conocimiento resulta un tema de gran interés. En este contexto, y específicamente en relación con la aplicación de estos algoritmos en el monitoreo y diagnóstico de máquinas eléctricas, el uso de señales de flujo es una alternativa muy interesante para detectar las diferentes fallas. Asimismo, y en relación con el uso de señales biomédicas, es de gran interés extraer características relevantes en las señales de actigrafía para la identificación de patrones que pueden estar asociados con una patología específica. En esta tesis, se han desarrollado y aplicado algoritmos basados en el procesamiento estadístico y espectral de señales, para la detección y diagnóstico de fallas en máquinas eléctricas, así como su aplicación al tratamiento de señales de actigrafía. Con el desarrollo de los algoritmos propuestos, se pretende tener un sistema dinámico de indicación e identificación para detectar la falla o la patología asociada que no depende de parámetros o información externa que pueda condicionar los resultados, sólo de la información primaria que inicialmente presenta la señal a tratar (como la periodicidad, amplitud, frecuencia y fase de la muestra). A partir del uso de los algoritmos desarrollados para la detección y diagnóstico de fallas en máquinas eléctricas, basados en el procesamiento estadístico y espectral de señales, se pretende avanzar, en relación con los modelos actualmente existentes, en la identificación de fallas mediante el uso de señales de flujo. Además, y por otro lado, mediante el uso de estadísticas de orden superior, para la extracción de anomalías en las señales de actigrafía, se han encontrado parámetros alternativos para la identificación de procesos que pueden estar relacionados con patologías específicas.[CA] En l'actualitat, el desenvolupament i aplicació d'algoritmes per al reconeixement de patrons que milloren els nivells de rendiment, detecció i processament de dades en diferents àrees del coneixement és un tema de gran interés. En aquest context, i específicament en relació amb l'aplicació d'aquests algoritmes a la monitorització i diagnòstic de màquines elèctriques, l'ús de senyals de flux és una alternativa molt interessant per tal de detectar les diferents avaries. Així mateix, i en relació amb l'ús de senyals biomèdics, és de gran interés extraure característiques rellevants en els senyals d'actigrafia per a la identificació de patrons que poden estar associats amb una patologia específica. En aquesta tesi, s'han desenvolupat i aplicat algoritmes basats en el processament estadístic i espectral de senyals per a la detecció i diagnòstic d'avaries en màquines elèctriques, així com la seua aplicació al tractament de senyals d'actigrafia. Amb el desenvolupament dels algoritmes proposats, es pretén obtindre un sistema dinàmic d'indicació i identificació per a detectar l'avaria o la patologia associada, el qual no depenga de paràmetres o informació externa que puga condicionar els resultats, només de la informació primària que inicialment presenta el senyal a tractar (com la periodicitat, amplitud, freqüència i fase de la mostra). A partir de l'ús dels algoritmes desenvolupats per a la detecció i diagnòstic d'avaries en màquines elèctriques, basats en el processament estadístic i espectral de senyals, es pretén avançar, en relació amb els models actualment existents, en la identificació de avaries mitjançant l'ús de senyals de flux. A més, i d'altra banda, mitjançant l'ús d'estadístics d'ordre superior, per a l'extracció d'anomalies en els senyals d'actigrafía, s'han trobat paràmetres alternatius per a la identificació de processos que poden estar relacionats amb patologies específiques.[EN] Nowadays, the development and application of algorithms for pattern recognition that improve the levels of performance, detection and data processing in different areas of knowledge is a topic of great interest. In this context, and specifically in relation to the application of these algorithms to the monitoring and diagnosis of electrical machines, the use of stray flux signals is a very interesting alternative to detect the different faults. Likewise, and in relation to the use of biomedical signals, it is of great interest to extract relevant features in actigraphy signals for the identification of patterns that may be associated with a specific pathology. In this thesis, algorithms based on statistical and spectral signal processing have been developed and applied to the detection and diagnosis of failures in electrical machines, as well as to the treatment of actigraphy signals. With the development of the proposed algorithms, it is intended to have a dynamic indication and identification system for detecting the failure or associated pathology that does not depend on parameters or external information that may condition the results, but only rely on the primary information that initially presents the signal to be treated (such as the periodicity, amplitude, frequency and phase of the sample). From the use of the algorithms developed for the detection and diagnosis of failures in electrical machines, based on the statistical and spectral signal processing, it is intended to advance, in relation to the models currently existing, in the identification of failures through the use of stray flux signals. In addition, and on the other hand, through the use of higher order statistics for the extraction of anomalies in actigraphy signals, alternative parameters have been found for the identification of processes that may be related to specific pathologies.Iglesias Martínez, ME. (2020). Development of algorithms of statistical signal processing for the detection and pattern recognitionin time series. Application to the diagnosis of electrical machines and to the features extraction in Actigraphy signals [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/145603TESISCompendi

Prognostic Approaches Using Transient Monitoring Methods

The utilization of steady state monitoring techniques has become an established means of providing diagnostic and prognostic information regarding both systems and equipment. However, steady state data is not the only, or in some cases, even the best source of information regarding the health and state of a system. Transient data has largely been overlooked as a source of system information due to the additional complexity in analyzing these types of signals. The development for algorithms and techniques to quickly, and intuitively develop generic quantification of deviations a transient signal towards the goal of prognostic predictions has until now, largely been overlooked. By quantifying and trending these shifts, an accurate measure of system heath can be established and utilized by prognostic algorithms. In fact, for some systems the elevated stress levels during transients can provide better, more clear indications of system health than those derived from steady state monitoring. This research is based on the hypothesis that equipment health signals for some failure modes are stronger during transient conditions than during steady-state because transient conditions (e.g. start-up) place greater stress on the equipment for these failure modes. From this it follows that these signals related to the system or equipment health would display more prominent indications of abnormality if one were to know the proper means to identify them. This project seeks to develop methods and conceptual models to monitor transient signals for equipment health. The purpose of this research is to assess if monitoring of transient signals could provide alternate or better indicators of incipient equipment failure prior to steady state signals. The project is focused on identifying methods, both traditional and novel, suitable to implement and test transient model monitoring in both an useful and intuitive way. By means of these techniques, it is shown that the addition information gathered during transient portions of life can be used to either to augment existing steady-state information, or in cases where such information is unavailable, be used as a primary means of developing prognostic models

A survey on artificial intelligence-based acoustic source identification

The concept of Acoustic Source Identification (ASI), which refers to the process of identifying noise sources has attracted increasing attention in recent years. The ASI technology can be used for surveillance, monitoring, and maintenance applications in a wide range of sectors, such as defence, manufacturing, healthcare, and agriculture. Acoustic signature analysis and pattern recognition remain the core technologies for noise source identification. Manual identification of acoustic signatures, however, has become increasingly challenging as dataset sizes grow. As a result, the use of Artificial Intelligence (AI) techniques for identifying noise sources has become increasingly relevant and useful. In this paper, we provide a comprehensive review of AI-based acoustic source identification techniques. We analyze the strengths and weaknesses of AI-based ASI processes and associated methods proposed by researchers in the literature. Additionally, we did a detailed survey of ASI applications in machinery, underwater applications, environment/event source recognition, healthcare, and other fields. We also highlight relevant research directions