10,550 research outputs found
Recommended from our members
Error resilient video transcoding for robust inter-network communications using GPRS
A novel fully comprehensive mobile video communications
system is proposed in this paper. This system exploits
the useful rate management features of the video transcoders and
combines them with error resilience for transmissions of coded
video streams over general packet radio service (GPRS) mobileaccess
networks. The error-resilient video transcoding operation
takes place at a centralized point, referred to as a video proxy,
which provides the necessary output transmission rates with the
required amount of robustness. With the use of this proposed
algorithm, error resilience can be added to an already compressed
video stream at an intermediate stage at the edge of two or more
different networks through two resilience schemes, namely the
adaptive intra refresh (AIR) and feedback control signaling (FCS)
methods. Both resilience tools impose an output rate increase
which can also be prevented with the proposed novel technique in
this paper. Thus, an error-resilient video transcoding scheme is
presented to give robust video outputs at near target transmission
rates that only require the same number of GPRS timeslots as
the nonresilient schemes. Moreover, an ultimate robustness is
also accomplished with the combination of the two resilience
algorithms at the video proxy. Extensive computer simulations
demonstrate the effectiveness of the proposed system
Recommended from our members
Robust Adaptive Intra Refresh for Multiview Video
Transmission error propagation in wireless multimedia communication systems has become a recurring
problem. This persistent problem has led to grave consequences on the visual quality of the decoded video.
It is against this backdrop that, we present an adaptive intra refresh (AIR) error-resilient coding tool to
mitigate the effect of transmission error propagation in 3D video communications. This work utilizes
periodic insertion of intra macroblocks in badly error-infected frames temporally as well as related frames
in the multi view video scheme. Our objective is to maximize the transmission efficiency while ensuring the
transmission robustness of the coded bitstream. The selection of periodic macroblocks is based on areas
with high motion above a pre-set threshold. The coding modes of the macroblocks are based on the
distortion expectation due to transmission errors. Extensive simulation results show significant
improvement in both objective and subjective video quality at different intra refresh rates
A Study on Error Resilient Techniques for Video Coding
本文主要研究视频编码的容错技术,提高视频码流在互联网、无线网络等不可靠信道中传输的鲁棒性。研究对象包括单视点视频编码、双目立体视频编码和多视点视频编码。 在单视点视频编码研究方面,本文在H.264/AVC视频编码标准的基础上,分别从差错隐藏和差错恢复编码的角度提出了两种视频编码差错控制算法。(1)基于运动连续性和纹理相关性的丢失宏块差错隐藏算法(MCTC),该算法在解码过程中实现差错隐藏,无需对编码结构进行修改。(2)基于H.264/AVC和三维双树离散小波变换的分层多描述视频编码算法(HLMDVC),采用了多描述编码框架,通过增加部分冗余信息以提高信道出错情况下视频重建的质量;三维双树离散...In this work, error resilient techniques for video coding are studied to improve the robustness of video transmission via unreliable networks, such as Internet or thewireless network. The research includes error resilient techniques for single viewvideo coding, for stereo video coding, and for multiview video coding. For single view video coding, two algorithms are proposed to improve the fault ...学位:工学博士院系专业:信息科学与技术学院_控制理论与控制工程学号:2322009015371
Intra Coding Strategy for Video Error Resiliency: Behavioral Analysis
One challenge in video transmission is to deal with packet loss. Since the compressed video streams are sensitive to data loss, the error resiliency of the encoded video becomes important. When video data is lost and retransmission is not possible, the missed data should be concealed. But loss concealment causes distortion in the lossy frame which also propagates into the next frames even if their data are received correctly. One promising solution to mitigate this error propagation is intra coding. There are three approaches for intra coding: intra coding of a number of blocks selected randomly or regularly, intra coding of some specific blocks selected by an appropriate cost function, or intra coding of a whole frame. But Intra coding reduces the compression ratio; therefore, there exists a trade-off between bitrate and error resiliency achieved by intra coding. In this paper, we study and show the best strategy for getting the best rate-distortion performance. Considering the error propagation, an objective function is formulated, and with some approximations, this objective function is simplified and solved. The solution demonstrates that periodical I-frame coding is preferred over coding only a number of blocks as intra mode in P-frames. Through examination of various test sequences, it is shown that the best intra frame period depends on the coding bitrate as well as the packet loss rate. We then propose a scheme to estimate this period from curve fitting of the experimental results, and show that our proposed scheme outperforms other methods of intra coding especially for higher loss rates and coding bitrates
Distributed video coding for wireless video sensor networks: a review of the state-of-the-art architectures
Distributed video coding (DVC) is a relatively new video coding architecture originated from two fundamental theorems namely, Slepian–Wolf and Wyner–Ziv. Recent research developments have made DVC attractive for applications in the emerging domain of wireless video sensor networks (WVSNs). This paper reviews the state-of-the-art DVC architectures with a focus on understanding their opportunities and gaps in addressing the operational requirements and application needs of WVSNs
Recommended from our members
Research and developments of Dirac video codec
This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel University.In digital video compression, apart from storage, successful transmission of the compressed video
data over the bandwidth limited erroneous channels is another important issue. To enable a video
codec for broadcasting application, it is required to implement the corresponding coding tools (e.g.
error-resilient coding, rate control etc.). They are normally non-normative parts of a video codec and
hence their specifications are not defined in the standard. In Dirac as well, the original codec is
optimized for storage purpose only and so, several non-normative part of the encoding tools are still
required in order to be able to use in other types of application.
Being the "Research and Developments of the Dirac Video Codec" as the research title, phase I of
the project is mainly focused on the error-resilient transmission over a noisy channel. The error-resilient
coding method used here is a simple and low complex coding scheme which provides the
error-resilient transmission of the compressed video bitstream of Dirac video encoder over the packet
erasure wired network. The scheme combines source and channel coding approach where error-resilient
source coding is achieved by data partitioning in the wavelet transformed domain and
channel coding is achieved through the application of either Rate-Compatible Punctured
Convolutional (RCPC) Code or Turbo Code (TC) using un-equal error protection between header plus
MV and data. The scheme is designed mainly for the packet-erasure channel, i.e. targeted for the
Internet broadcasting application.
But, for a bandwidth limited channel, it is still required to limit the amount of bits generated from
the encoder depending on the available bandwidth in addition to the error-resilient coding. So, in the
2nd phase of the project, a rate control algorithm is presented. The algorithm is based upon the Quality
Factor (QF) optimization method where QF of the encoded video is adaptively changing in order to
achieve average bitrate which is constant over each Group of Picture (GOP). A relation between the
bitrate, R and the QF, which is called Rate-QF (R-QF) model is derived in order to estimate the
optimum QF of the current encoding frame for a given target bitrate, R.
In some applications like video conferencing, real-time encoding and decoding with minimum
delay is crucial, but, the ability to do real-time encoding/decoding is largely determined by the
complexity of the encoder/decoder. As we all know that motion estimation process inside the encoder
is the most time consuming stage. So, reducing the complexity of the motion estimation stage will
certainly give one step closer to the real-time application. So, as a partial contribution toward realtime
application, in the final phase of the research, a fast Motion Estimation (ME) strategy is designed
and implemented. It is the combination of modified adaptive search plus semi-hierarchical way of
motion estimation. The same strategy was implemented in both Dirac and H.264 in order to
investigate its performance on different codecs. Together with this fast ME strategy, a method which
is called partial cost function calculation in order to further reduce down the computational load of the
cost function calculation was presented. The calculation is based upon the pre-defined set of patterns
which were chosen in such a way that they have as much maximum coverage as possible over the
whole block.
In summary, this research work has contributed to the error-resilient transmission of compressed
bitstreams of Dirac video encoder over a bandwidth limited error prone channel. In addition to this,
the final phase of the research has partially contributed toward the real-time application of the Dirac
video codec by implementing a fast motion estimation strategy together with partial cost function
calculation idea.BBC R&D and Brunel University
Cross-layer Optimized Wireless Video Surveillance
A wireless video surveillance system contains three major components, the video capture and preprocessing, the video compression and transmission over wireless sensor networks (WSNs), and the video analysis at the receiving end. The coordination of different components is important for improving the end-to-end video quality, especially under the communication resource constraint. Cross-layer control proves to be an efficient measure for optimal system configuration. In this dissertation, we address the problem of implementing cross-layer optimization in the wireless video surveillance system.
The thesis work is based on three research projects. In the first project, a single PTU (pan-tilt-unit) camera is used for video object tracking. The problem studied is how to improve the quality of the received video by jointly considering the coding and transmission process. The cross-layer controller determines the optimal coding and transmission parameters, according to the dynamic channel condition and the transmission delay. Multiple error concealment strategies are developed utilizing the special property of the PTU camera motion.
In the second project, the binocular PTU camera is adopted for video object tracking. The presented work studied the fast disparity estimation algorithm and the 3D video transcoding over the WSN for real-time applications. The disparity/depth information is estimated in a coarse-to-fine manner using both local and global methods. The transcoding is coordinated by the cross-layer controller based on the channel condition and the data rate constraint, in order to achieve the best view synthesis quality.
The third project is applied for multi-camera motion capture in remote healthcare monitoring. The challenge is the resource allocation for multiple video sequences. The presented cross-layer design incorporates the delay sensitive, content-aware video coding and transmission, and the adaptive video coding and transmission to ensure the optimal and balanced quality for the multi-view videos.
In these projects, interdisciplinary study is conducted to synergize the surveillance system under the cross-layer optimization framework. Experimental results demonstrate the efficiency of the proposed schemes. The challenges of cross-layer design in existing wireless video surveillance systems are also analyzed to enlighten the future work.
Adviser: Song C
Cross-layer Optimized Wireless Video Surveillance
A wireless video surveillance system contains three major components, the video capture and preprocessing, the video compression and transmission over wireless sensor networks (WSNs), and the video analysis at the receiving end. The coordination of different components is important for improving the end-to-end video quality, especially under the communication resource constraint. Cross-layer control proves to be an efficient measure for optimal system configuration. In this dissertation, we address the problem of implementing cross-layer optimization in the wireless video surveillance system.
The thesis work is based on three research projects. In the first project, a single PTU (pan-tilt-unit) camera is used for video object tracking. The problem studied is how to improve the quality of the received video by jointly considering the coding and transmission process. The cross-layer controller determines the optimal coding and transmission parameters, according to the dynamic channel condition and the transmission delay. Multiple error concealment strategies are developed utilizing the special property of the PTU camera motion.
In the second project, the binocular PTU camera is adopted for video object tracking. The presented work studied the fast disparity estimation algorithm and the 3D video transcoding over the WSN for real-time applications. The disparity/depth information is estimated in a coarse-to-fine manner using both local and global methods. The transcoding is coordinated by the cross-layer controller based on the channel condition and the data rate constraint, in order to achieve the best view synthesis quality.
The third project is applied for multi-camera motion capture in remote healthcare monitoring. The challenge is the resource allocation for multiple video sequences. The presented cross-layer design incorporates the delay sensitive, content-aware video coding and transmission, and the adaptive video coding and transmission to ensure the optimal and balanced quality for the multi-view videos.
In these projects, interdisciplinary study is conducted to synergize the surveillance system under the cross-layer optimization framework. Experimental results demonstrate the efficiency of the proposed schemes. The challenges of cross-layer design in existing wireless video surveillance systems are also analyzed to enlighten the future work.
Adviser: Song C
Burst-by-Burst Adaptive Decision Feedback Equalised TCM, TTCM and BICM for H.263-Assisted Wireless Video Telephony
Decision Feedback Equaliser (DFE) aided wideband Burst-by-Burst (BbB) Adaptive Trellis Coded Modulation (TCM), Turbo Trellis Coded Modulation (TTCM) and Bit-Interleaved Coded Modulation (BICM) assisted H.263-based video transceivers are proposed and characterised in performance terms when communicating over the COST 207 Typical Urban wideband fading channel. Specifically, four different modulation modes, namely 4QAM, 8PSK, 16QAM and 64QAM are invoked and protected by the above-mentioned coded modulation schemes. The TTCM assisted scheme was found to provide the best video performance, although at the cost of the highest complexity. A range of lower-complexity arrangements will also be characterised. Finally, in order to confirm these findings in an important practical environment, we have also investigated the adaptive TTCM scheme in the CDMA-based Universal Mobile Telecommunications System's (UMTS) Terrestrial Radio Access (UTRA) scenario and the good performance of adaptive TTCM scheme recorded when communicating over the COST 207 channels was retained in the UTRA environment
- …