Diseño de circuitos analógicos y de señal mixta con consideraciones de diseño físico y variabilidad

Advances in microelectronic technology has been based on an increasing capacity to integrate transistors, moving this industry to the nanoelectronics realm in recent years. Moore’s Law [1] has predicted (and somehow governed) the growth of the capacity to integrate transistors in a single IC. Nevertheless, while this capacity has grown steadily, the increasing number of design tasks that are involved in the creation of the integrated circuit and their complexity has led to a phenomenon known as the ``design gap´´. This is the difference between what can theoretically be integrated and what can practically be designed. Since the early 2000s, the International Technology Roadmap of Semiconductors (ITRS) reports, published by the Semiconductor Industry Association (SIA), alert about the necessity to limit the growth of the design cost by increasing the productivity of the designer to continue the semiconductor industry’s growth. Design automation arises as a key element to close this ”design gap”. In this sense, electronic design automation (EDA) tools have reached a level of maturity for digital circuits that is far behind the EDA tools that are made for analog circuit design automation. While digital circuits rely, in general, on two stable operation states (which brings inherent robustness against numerous imperfections and interferences, leading to few design constraints like area, speed or power consumption), analog signal processing, on the other hand, demands compliance with lots of constraints (e.g., matching, noise, robustness, ...). The triumph of digital CMOS circuits, thanks to their mentioned robustness, has, ultimately, facilitated the way that circuits can be processed by algorithms, abstraction levels and description languages, as well as how the design information traverse the hierarchical levels of a digital system. The field of analog design automation faces many more difficulties due to the many sources of perturbation, such as the well-know process variability, and the difficulty in treating these systematically, like digital tools can do. In this Thesis, different design flows are proposed, focusing on new design methodologies for analog circuits, thus, trying to close the ”gap” between digital and analog EDA tools. In this chapter, the most important sources for perturbations and their impact on the analog design process are discussed in Section 1.2. The traditional analog design flow is discussed in 1.3. Emerging design methodologies that try to reduce the ”design gap” are presented in Section 1.4 where the key concept of Pareto-Optimal Front (POF) is explained. This concept, brought from the field of economics, models the analog circuit performances into a set of solutions that show the optimal trade-offs among conflicting circuit performances (e.g. DC-gain and unity-gain frequency). Finally, the goals of this thesis are presented in Section 1.5

Computational intelligence approaches to robotics, automation, and control [Volume guest editors]

No abstract available

System level performance and yield optimisation for analogue integrated circuits

Advances in silicon technology over the last decade have led to increased integration of analogue and digital functional blocks onto the same single chip. In such a mixed signal environment, the analogue circuits must use the same process technology as their digital neighbours. With reducing transistor sizes, the impact of process variations on analogue design has become prominent and can lead to circuit performance falling below specification and hence reducing the yield.This thesis explores the methodology and algorithms for an analogue integrated circuit automation tool that optimizes performance and yield. The trade-offs between performance and yield are analysed using a combination of an evolutionary algorithm and Monte Carlo simulation. Through the integration of yield parameter into the optimisation process, the trade off between the performance functions can be better treated that able to produce a higher yield. The results obtained from the performance and variation exploration are modelled behaviourally using a Verilog-A language. The model has been verified with transistor level simulation and a silicon prototype.For a large analogue system, the circuit is commonly broken down into its constituent sub-blocks, a process known as hierarchical design. The use of hierarchical-based design and optimisation simplifies the design task and accelerates the design flow by encouraging design reuse.A new approach for system level yield optimisation using a hierarchical-based design is proposed and developed. The approach combines Multi-Objective Bottom Up (MUBU) modelling technique to model the circuit performance and variation and Top Down Constraint Design (TDCD) technique for the complete system level design. The proposed method has been used to design a 7th order low pass filter and a charge pump phase locked loop system. The results have been verified with transistor level simulations and suggest that an accurate system level performance and yield prediction can be achieved with the proposed methodology

Artificial cognitive architecture with self-learning and self-optimization capabilities. Case studies in micromachining processes

Tesis doctoral inédita leída en la Universidad Autónoma de Madrid, Escuela Politécnica Superior, Departamento de Ingeniería Informática. Fecha de lectura : 22-09-201

MULTI-OBJECTIVE DESIGN AUTOMATION FOR RECONFIGURABLE MULTI-PROCESSOR SYSTEMS

Ph.DDOCTOR OF PHILOSOPH

STATISTICAL MACHINE LEARNING BASED MODELING FRAMEWORK FOR DESIGN SPACE EXPLORATION AND RUN-TIME CROSS-STACK ENERGY OPTIMIZATION FOR MANY-CORE PROCESSORS

The complexity of many-core processors continues to grow as a larger number of heterogeneous cores are integrated on a single chip. Such systems-on-chip contains computing structures ranging from complex out-of-order cores, simple in-order cores, digital signal processors (DSPs), graphic processing units (GPUs), application specific processors, hardware accelerators, I/O subsystems, network-on-chip interconnects, and large caches arranged in complex hierarchies. While the industry focus is on putting higher number of cores on a single chip, the key challenge is to optimally architect these many-core processors such that performance, energy and area constraints are satisfied. The traditional approach to processor design through extensive cycle accurate simulations are ill-suited for designing many-core processors due to the large microarchitecture design space that must be explored. Additionally it is hard to optimize such complex processors and the applications that run on them statically at design time such that performance and energy constraints are met under dynamically changing operating conditions. The dissertation establishes statistical machine learning based modeling framework that enables the efficient design and operation of many-core processors that meets performance, energy and area constraints. We apply the proposed framework to rapidly design the microarchitecture of a many-core processor for multimedia, computer graphics rendering, finance, and data mining applications derived from the Parsec benchmark. We further demonstrate the application of the framework in the joint run-time adaptation of both the application and microarchitecture such that energy availability constraints are met