Deep learning-based fully automatic segmentation of wrist cartilage in MR images

The study objective was to investigate the performance of a dedicated convolutional neural network (CNN) optimized for wrist cartilage segmentation from 2D MR images. CNN utilized a planar architecture and patch-based (PB) training approach that ensured optimal performance in the presence of a limited amount of training data. The CNN was trained and validated in twenty multi-slice MRI datasets acquired with two different coils in eleven subjects (healthy volunteers and patients). The validation included a comparison with the alternative state-of-the-art CNN methods for the segmentation of joints from MR images and the ground-truth manual segmentation. When trained on the limited training data, the CNN outperformed significantly image-based and patch-based U-Net networks. Our PB-CNN also demonstrated a good agreement with manual segmentation (Sorensen-Dice similarity coefficient (DSC) = 0.81) in the representative (central coronal) slices with large amount of cartilage tissue. Reduced performance of the network for slices with a very limited amount of cartilage tissue suggests the need for fully 3D convolutional networks to provide uniform performance across the joint. The study also assessed inter- and intra-observer variability of the manual wrist cartilage segmentation (DSC=0.78-0.88 and 0.9, respectively). The proposed deep-learning-based segmentation of the wrist cartilage from MRI could facilitate research of novel imaging markers of wrist osteoarthritis to characterize its progression and response to therapy

Deep learning-based post-processing of real-time MRI to assess and quantify dynamic wrist movement in health and disease

While morphologic magnetic resonance imaging (MRI) is the imaging modality of choice for the evaluation of ligamentous wrist injuries, it is merely static and incapable of diagnosing dynamic wrist instability. Based on real-time MRI and algorithm-based image post-processing in terms of convolutional neural networks (CNNs), this study aims to develop and validate an automatic technique to quantify wrist movement. A total of 56 bilateral wrists (28 healthy volunteers) were imaged during continuous and alternating maximum ulnar and radial abduction. Following CNN-based automatic segmentations of carpal bone contours, scapholunate and lunotriquetral gap widths were quantified based on dedicated algorithms and as a function of wrist position. Automatic segmentations were in excellent agreement with manual reference segmentations performed by two radiologists as indicated by Dice similarity coefficients of 0.96 ± 0.02 and consistent and unskewed Bland–Altman plots. Clinical applicability of the framework was assessed in a patient with diagnosed scapholunate ligament injury. Considerable increases in scapholunate gap widths across the range-of-motion were found. In conclusion, the combination of real-time wrist MRI and the present framework provides a powerful diagnostic tool for dynamic assessment of wrist function and, if confirmed in clinical trials, dynamic carpal instability that may elude static assessment using clinical-standard imaging modalities

Novel Approaches to the Representation and Analysis of 3D Segmented Anatomical Districts

Nowadays, image processing and 3D shape analysis are an integral part of clinical practice and have the potentiality to support clinicians with advanced analysis and visualization techniques. Both approaches provide visual and quantitative information to medical practitioners, even if from different points of view. Indeed, shape analysis is aimed at studying the morphology of anatomical structures, while image processing is focused more on the tissue or functional information provided by the pixels/voxels intensities levels. Despite the progress obtained by research in both fields, a junction between these two complementary worlds is missing. When working with 3D models analyzing shape features, the information of the volume surrounding the structure is lost, since a segmentation process is needed to obtain the 3D shape model; however, the 3D nature of the anatomical structure is represented explicitly. With volume images, instead, the tissue information related to the imaged volume is the core of the analysis, while the shape and morphology of the structure are just implicitly represented, thus not clear enough. The aim of this Thesis work is the integration of these two approaches in order to increase the amount of information available for physicians, allowing a more accurate analysis of each patient. An augmented visualization tool able to provide information on both the anatomical structure shape and the surrounding volume through a hybrid representation, could reduce the gap between the two approaches and provide a more complete anatomical rendering of the subject. To this end, given a segmented anatomical district, we propose a novel mapping of volumetric data onto the segmented surface. The grey-levels of the image voxels are mapped through a volume-surface correspondence map, which defines a grey-level texture on the segmented surface. The resulting texture mapping is coherent to the local morphology of the segmented anatomical structure and provides an enhanced visual representation of the anatomical district. The integration of volume-based and surface-based information in a unique 3D representation also supports the identification and characterization of morphological landmarks and pathology evaluations. The main research contributions of the Ph.D. activities and Thesis are: \u2022 the development of a novel integration algorithm that combines surface-based (segmented 3D anatomical structure meshes) and volume-based (MRI volumes) information. The integration supports different criteria for the grey-levels mapping onto the segmented surface; \u2022 the development of methodological approaches for using the grey-levels mapping together with morphological analysis. The final goal is to solve problems in real clinical tasks, such as the identification of (patient-specific) ligament insertion sites on bones from segmented MR images, the characterization of the local morphology of bones/tissues, the early diagnosis, classification, and monitoring of muscle-skeletal pathologies; \u2022 the analysis of segmentation procedures, with a focus on the tissue classification process, in order to reduce operator dependency and to overcome the absence of a real gold standard for the evaluation of automatic segmentations; \u2022 the evaluation and comparison of (unsupervised) segmentation methods, finalized to define a novel segmentation method for low-field MR images, and for the local correction/improvement of a given segmentation. The proposed method is simple but effectively integrates information derived from medical image analysis and 3D shape analysis. Moreover, the algorithm is general enough to be applied to different anatomical districts independently of the segmentation method, imaging techniques (such as CT), or image resolution. The volume information can be integrated easily in different shape analysis applications, taking into consideration not only the morphology of the input shape but also the real context in which it is inserted, to solve clinical tasks. The results obtained by this combined analysis have been evaluated through statistical analysis

In vivo morphometric and mechanical characterization of trabecular bone from high resolution magnetic resonance imaging

La osteoporosis es una enfermedad ósea que se manifiesta con una menor densidad ósea y el deterioro de la arquitectura del hueso esponjoso. Ambos factores aumentan la fragilidad ósea y el riesgo de sufrir fracturas óseas, especialmente en mujeres, donde existe una alta prevalencia. El diagnóstico actual de la osteoporosis se basa en la cuantificación de la densidad mineral ósea (DMO) mediante la técnica de absorciometría dual de rayos X (DXA). Sin embargo, la DMO no puede considerarse de manera aislada para la evaluación del riesgo de fractura o los efectos terapéuticos. Existen otros factores, tales como la disposición microestructural de las trabéculas y sus características que es necesario tener en cuenta para determinar la calidad del hueso y evaluar de manera más directa el riesgo de fractura. Los avances técnicos de las modalidades de imagen médica, como la tomografía computarizada multidetector (MDCT), la tomografía computarizada periférica cuantitativa (HR-pQCT) y la resonancia magnética (RM) han permitido la adquisición in vivo con resoluciones espaciales elevadas. La estructura del hueso trabecular puede observarse con un buen detalle empleando estas técnicas. En particular, el uso de los equipos de RM de 3 Teslas (T) ha permitido la adquisición con resoluciones espaciales muy altas. Además, el buen contraste entre hueso y médula que proporcionan las imágenes de RM, así como la utilización de radiaciones no ionizantes sitúan a la RM como una técnica muy adecuada para la caracterización in vivo de hueso trabecular en la enfermedad de la osteoporosis. En la presente tesis se proponen nuevos desarrollos metodológicos para la caracterización morfométrica y mecánica del hueso trabecular en tres dimensiones (3D) y se aplican a adquisiciones de RM de 3T con alta resolución espacial. El análisis morfométrico está compuesto por diferentes algoritmos diseñados para cuantificar la morfología, la complejidad, la topología y los parámetros de anisotropía del tejido trabecular. En cuanto a la caracterización mecánica, se desarrollaron nuevos métodos que permiten la simulación automatizada de la estructura del hueso trabecular en condiciones de compresión y el cálculo del módulo de elasticidad. La metodología desarrollada se ha aplicado a una población de sujetos sanos con el fin de obtener los valores de normalidad del hueso esponjoso. Los algoritmos se han aplicado también a una población de pacientes con osteoporosis con el fin de cuantificar las variaciones de los parámetros en la enfermedad y evaluar las diferencias con los resultados obtenidos en un grupo de sujetos sanos con edad similar.Los desarrollos metodológicos propuestos y las aplicaciones clínicas proporcionan resultados satisfactorios, presentando los parámetros una alta sensibilidad a variaciones de la estructura trabecular principalmente influenciadas por el sexo y el estado de enfermedad. Por otra parte, los métodos presentan elevada reproducibilidad y precisión en la cuantificación de los valores morfométricos y mecánicos. Estos resultados refuerzan el uso de los parámetros presentados como posibles biomarcadores de imagen en la enfermedad de la osteoporosis.Alberich Bayarri, Á. (2010). In vivo morphometric and mechanical characterization of trabecular bone from high resolution magnetic resonance imaging [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/8981Palanci

Magnetic resonance imaging and advanced imaging assessment of the growth plate in the adolescent and young adult

The growth plate is a cartilaginous structure located between the metaphysis and epiphysis in long bones. It is the centre for longitudinal growth. Longitudinal growth has a biphasic pattern with a peak during foetal and early postnatal life and another peak during puberty. Growth finally stops after the pubertal growth spurt during late adolescence. Longitudinal bone growth and the skeletal maturation process have traditionally been evaluated with radiographs. MRI has become an alternative since it does not use radiation, visualizes both bone and cartilaginous tissue, and may visualize growth velocity using diffusion tensor imaging (DTI). The overall aim of this thesis is to investigate how best to image the growth plate and which professionals are most qualified to do the assessment. The following studies were conducted in service of this objective. Study I: MRI of the knee was performed in 410 individuals and cartilage-dedicated sequences as well as T1-weighted images were obtained. The images were blindly analyzed by general and pediatric radiologists and their observer agreements were compared. Cartilage-dedicated sequence showed greater agreement than T1 and a higher agreement was seen among pediatric radiologists. Study II: growth plates were imaged at five anatomical sites in 958 individuals using a cartilage dedicated sequence in 1.5 T MRI scanner. The closure of the growth plate was compared to age, sex, pubertal development, BMI and physical activity to see if any of these factors affected the closure of the growth plate. Skeletal maturation occurs in ascending order, from the calcaneus to the distal radius, and correlates with sex, sexual maturation, and BMI but not physical activity. Study IV: the third study of a human population, this study analyzed DTI of the growth plates of the knee in 159 individuals in a 3 T MRI scanner. The DTI metrics and tractography had a relatively linear relationship with chronological age but a different pattern was seen when the same metrics were compared to skeletal maturation. Tractography was seen in the mature growth plate and should therefore be approached with caution in the later stages of skeletal maturation]. Study III: an animal study performed to validate the results from the previous studies. Twelve rabbits were imaged with MRI, micro computed tomography and histology to compare MRI with the other modalities. All modalities performed equally well and validated that MRI can be used to assess the growth plate. In conclusion, the growth plate fuses progressively with age in ascending order and is preferably imaged with a cartilage dedicated sequence and assessed by a pediatric radiologist. The animal model verified that DTI can be used to evaluate the skeletal maturation process and that tractography can be used to assess activity in the growth plate. Tractography seems promising to assess the activity of the open growth plate but must be approached with caution in the later stages of skeletal maturation process of the growth plate

Quantification of bone using a 3.0 tesla clinical magnetic resonance scanner

The work in this thesis examines the potential of using magnetic resonance imaging and spectroscopy (MRI & MRS) as a quantitative tool for diagnosing bone abnormalities at multiple skeletal sites, which could be used in conjunction with routine clinical imaging.MRI and MRS are routinely used in the clinical setting for the diagnosis of various types of diseases and abnormalities due to its advantages of providing excellent soft tissue contrast and also providing physiological and metabolic information. The use of MRI and MRS as a direct diagnostic tool for bone abnormalities is very limited at the moment due to issues of costs and standardisation. The aim in this thesis was to use the clinical 3.0 T MR scanner to acquire data from bone and bone marrow for identification of structural and chemical properties and to use those features to identify differences in bone strength and condition. The volunteers in this thesis were part of the high bone mass (HBM) study and they had additional acquisitions from dual-energy X-ray absorptiometry (DEXA) and peripheral quantitative computed tomography (pQCT).MR acquisition protocols have been successfully optimised for each type of bone region and in-house software has also been created to process the acquired data and quantify various types of structural and chemical properties.The MR data from distal radius and tibia demonstrated good correlation with pQCT data (e.g. Figure 8-2 & Figure 8-3) and were also able to differentiate between HBM-affected and control populations (e.g. Figure 8-26). The MR data from lumbar vertebrae also demonstrated good correlation with DEXA data and some of the measurements were also able to differentiate between the HBM-affected and control populations.The combined results from this thesis demonstrate that both MRI and MRS are sensitive techniques for measurement of bone quantity and quality, and they are ready to be applied for clinical investigation as part of routine clinical imaging to identify bone strength in relation to abnormalities and treatments

Artificial intelligence for MRI diagnosis of joints: a scoping review of the current state-of-the-art of deep learning-based approaches

Deep learning-based MRI diagnosis of internal joint derangement is an emerging field of artificial intelligence, which offers many exciting possibilities for musculoskeletal radiology. A variety of investigational deep learning algorithms have been developed to detect anterior cruciate ligament tears, meniscus tears, and rotator cuff disorders. Additional deep learning-based MRI algorithms have been investigated to detect Achilles tendon tears, recurrence prediction of musculoskeletal neoplasms, and complex segmentation of nerves, bones, and muscles. Proof-of-concept studies suggest that deep learning algorithms may achieve similar diagnostic performances when compared to human readers in meta-analyses; however, musculoskeletal radiologists outperformed most deep learning algorithms in studies including a direct comparison. Earlier investigations and developments of deep learning algorithms focused on the binary classification of the presence or absence of an abnormality, whereas more advanced deep learning algorithms start to include features for characterization and severity grading. While many studies have focused on comparing deep learning algorithms against human readers, there is a paucity of data on the performance differences of radiologists interpreting musculoskeletal MRI studies without and with artificial intelligence support. Similarly, studies demonstrating the generalizability and clinical applicability of deep learning algorithms using realistic clinical settings with workflow-integrated deep learning algorithms are sparse. Contingent upon future studies showing the clinical utility of deep learning algorithms, artificial intelligence may eventually translate into clinical practice to assist detection and characterization of various conditions on musculoskeletal MRI exams

Detection of osteoporosis in lumbar spine [L1-L4] trabecular bone: a review article

The human bones are categorized based on elemental micro architecture and porosity. The porosity of the inner trabecular bone is high that is 40-95% and the nature of the bone is soft and spongy where as the cortical bone is harder and is less porous that is 5 to 15%. Osteoporosis is a disease that normally affects women usually after their menopause. It largely causes mild bone fractures and further stages lead to the demise of an individual. This analysis is on the basis of bone mineral density (BMD) standards obtained through a variety of scientific methods experimented from different skeletal regions. The detection of osteoporosis in lumbar spine has been widely recognized as a promising way to frequent fractures. Therefore, premature analysis of osteoporosis will estimate the risk of the bone fracture which prevents life threats. This paper focuses on the advanced technology in imaging systems and fracture probability analysis of osteoporosis detection. The various segmentation techniques are explored to examine osteoporosis in particular region of the image and further significant attributes are extracted using different methods to classify normal and abnormal (osteoporotic) bones. The limitations of the reviewed papers are more in feature dimensions, lesser accuracy and expensive imaging modalities like computed tomography (CT), magnetic resonance imaging (MRI), and DEXA. To overcome these limitations it is suggested to have less feature dimensions, more accuracy and cost-effective imaging modality like X-ray. This is required to avoid bone fractures and to improve BMD with precision which further helps in the diagnosis of osteoporosis