Algorithms for Cell Layout

Cell layout is a critical step in the design process of computer chips. A cell is a logic function or storage element implemented in CMOS technology by transistors connected with wires. As each cell is used many times on a chip, improvements of a single cell layout can have a large effect on the overall chip performance. In the past years increasing difficulty to manufacture small feature sizes has lead to growing complexity of design rules. Producing cell layouts which are compliant with design rules and at the same time optimized w.r.t. layout size has become a difficult task for human experts. In this thesis we present BonnCell, a cell layout generator which is able to fully automatically produce design rule compliant layouts. It is able to guarantee area minimality of its layouts for small and medium sized cells. For large cells it uses a heuristic which produces layouts with a significant area reduction compared to those created manually. The routing problem is based on the Vertex Disjoint Steiner Tree Packing Problem with a large number of additional design rules. In Chapter 4 we present the routing algorithm which is based on a mixed integer programming (MIP) formulation that guarantees compliance with all design rules. The algorithm can also handle instances in which only part of the transistors are placed to check whether this partial placement can be extended to a routable placement of all transistors. Chapter 5 contains the transistor placement algorithm. Based on a branch and bound approach, it places transistors in turn and achieves efficiency by pruning parts of the search tree which do not contain optimum solutions. One major contribution of this thesis is that BonnCell only outputs routable placements. Simply checking the routability for each full placement in the search tree is too slow in practice, therefore several speedup strategies are applied. Some cells are too large to be solved by a single call of the placement algorithm. In Chapter 7 we describe how these cells are split up into smaller subcells which are placed and routed individually and subsequently merged into a placement and routing of the original cell. Two approaches for dividing the original cell into subcells are presented, one based on estimating the subcell area and the other based on solving the Min Cut Linear Arrangement Problem. BonnCell has enabled our cooperation partner IBM to drastically improve their cell design and layout process. In particular, a team of human experts needed several weeks to find a layout for their largest cell, consisting of 128 transistors. BonnCell processed this cell without manual intervention in 3 days and its layout uses 15% less area than the layout found by the human experts

AI/ML Algorithms and Applications in VLSI Design and Technology

An evident challenge ahead for the integrated circuit (IC) industry in the nanometer regime is the investigation and development of methods that can reduce the design complexity ensuing from growing process variations and curtail the turnaround time of chip manufacturing. Conventional methodologies employed for such tasks are largely manual; thus, time-consuming and resource-intensive. In contrast, the unique learning strategies of artificial intelligence (AI) provide numerous exciting automated approaches for handling complex and data-intensive tasks in very-large-scale integration (VLSI) design and testing. Employing AI and machine learning (ML) algorithms in VLSI design and manufacturing reduces the time and effort for understanding and processing the data within and across different abstraction levels via automated learning algorithms. It, in turn, improves the IC yield and reduces the manufacturing turnaround time. This paper thoroughly reviews the AI/ML automated approaches introduced in the past towards VLSI design and manufacturing. Moreover, we discuss the scope of AI/ML applications in the future at various abstraction levels to revolutionize the field of VLSI design, aiming for high-speed, highly intelligent, and efficient implementations

BioScript: programming safe chemistry on laboratories-on-a-chip

This paper introduces BioScript, a domain-specific language (DSL) for programmable biochemistry which executes on emerging microfluidic platforms. The goal of this research is to provide a simple, intuitive, and type-safe DSL that is accessible to life science practitioners. The novel feature of the language is its syntax, which aims to optimize human readability; the technical contributions of the paper include the BioScript type system and relevant portions of its compiler. The type system ensures that certain types of errors, specific to biochemistry, do not occur, including the interaction of chemicals that may be unsafe. The compiler includes novel optimizations that place biochemical operations to execute concurrently on a spatial 2D array platform on the granularity of a control flow graph, as opposed to individual basic blocks. Results are obtained using both a cycle-accurate microfluidic simulator and a software interface to a real-world platform

Fault and Defect Tolerant Computer Architectures: Reliable Computing With Unreliable Devices

This research addresses design of a reliable computer from unreliable device technologies. A system architecture is developed for a fault and defect tolerant (FDT) computer. Trade-offs between different techniques are studied and yield and hardware cost models are developed. Fault and defect tolerant designs are created for the processor and the cache memory. Simulation results for the content-addressable memory (CAM)-based cache show 90% yield with device failure probabilities of 3 x 10(-6), three orders of magnitude better than non fault tolerant caches of the same size. The entire processor achieves 70% yield with device failure probabilities exceeding 10(-6). The required hardware redundancy is approximately 15 times that of a non-fault tolerant design. While larger than current FT designs, this architecture allows the use of devices much more likely to fail than silicon CMOS. As part of model development, an improved model is derived for NAND Multiplexing. The model is the first accurate model for small and medium amounts of redundancy. Previous models are extended to account for dependence between the inputs and produce more accurate results

Combinatorial Optimization

This report summarizes the meeting on Combinatorial Optimization where new and promising developments in the field were discussed. Th

Benchmark methodologies for the optimized physical synthesis of RISC-V microprocessors

As technology continues to advance and chip sizes shrink, the complexity and design time required for integrated circuits have significantly increased. To address these challenges, Electronic Design Automation (EDA) tools have been introduced to streamline the design flow. These tools offer various methodologies and options to optimize power, performance, and chip area. However, selecting the most suitable methods from these options can be challenging, as they may lead to trade-offs among power, performance, and area. While architectural and Register Transfer Level (RTL) optimizations have been extensively studied in existing literature, the impact of optimization methods available in EDA tools on performance has not been thoroughly researched. This thesis aims to optimize a semiconductor processor through EDA tools within the physical synthesis domain to achieve increased performance while maintaining a balance between power efficiency and area utilization. By leveraging floorplanning tools and carefully selecting technology libraries and optimization options, the CV32E40P open-source processor is subjected to various floorplans to analyze their impact on chip performance. The employed techniques, including multibit components prefer option, multiplexer tree prefer option, identification and exclusion of problematic cells, and placement blockages, lead to significant improvements in cell density, congestion mitigation, and timing. The optimized synthesis results demonstrate a 71\% enhancement in chip design performance without a substantial increase in area, showcasing the effectiveness of these techniques in improving large-scale integrated circuits' performance, efficiency, and manufacturability. By exploring and implementing the available options in EDA tools, this study demonstrates how the processor's performance can be significantly improved while maintaining a balanced and efficient chip design. The findings contribute valuable insights to the field of electronic design automation, offering guidance to designers in selecting suitable methodologies for optimizing processors and other integrated circuits

Some Applications of the Weighted Combinatorial Laplacian

The weighted combinatorial Laplacian of a graph is a symmetric matrix which is the discrete analogue of the Laplacian operator. In this thesis, we will study a new application of this matrix to matching theory yielding a new characterization of factor-criticality in graphs and matroids. Other applications are from the area of the physical design of very large scale integrated circuits. The placement of the gates includes the minimization of a quadratic form given by a weighted Laplacian. A method based on the dual constrained subgradient method is proposed to solve the simultaneous placement and gate-sizing problem. A crucial step of this method is the projection to the flow space of an associated graph, which can be performed by minimizing a quadratic form given by the unweighted combinatorial Laplacian.Andwendungen der gewichteten kombinatorischen Laplace-Matrix Die gewichtete kombinatorische Laplace-Matrix ist das diskrete Analogon des Laplace-Operators. In dieser Arbeit stellen wir eine neuartige Charakterisierung von Faktor-Kritikalität von Graphen und Matroiden mit Hilfe dieser Matrix vor. Wir untersuchen andere Anwendungen im Bereich des Entwurfs von höchstintegrierten Schaltkreisen. Die Platzierung basiert auf der Minimierung einer quadratischen Form, die durch eine gewichtete kombinatorische Laplace-Matrix gegeben ist. Wir präsentieren einen Algorithmus für das allgemeine simultane Platzierungs- und Gattergrößen-Optimierungsproblem, der auf der dualen Subgradientenmethode basiert. Ein wichtiger Bestandteil dieses Verfahrens ist eine Projektion auf den Flussraum eines assoziierten Graphen, die als die Minimierung einer durch die Laplace-Matrix gegebenen quadratischen Form aufgefasst werden kann

Secure Physical Design

An integrated circuit is subject to a number of attacks including information leakage, side-channel attacks, fault-injection, malicious change, reverse engineering, and piracy. Majority of these attacks take advantage of physical placement and routing of cells and interconnects. Several measures have already been proposed to deal with security issues of the high level functional design and logic synthesis. However, to ensure end-to-end trustworthy IC design flow, it is necessary to have security sign-off during physical design flow. This paper presents a secure physical design roadmap to enable end-to-end trustworthy IC design flow. The paper also discusses utilization of AI/ML to establish security at the layout level. Major research challenges in obtaining a secure physical design are also discussed