A CAD Tool for Synthesizing Optimized Variants of Altera\u27s Nios II Soft-Core Processor

Soft-core processors offer embedded system designers the benefits of customization, flexibility and reusability. Altera\u27s NIOS II soft-core processor is a popular, commercially available soft-core processor that can be implemented on a variety of Altera FPGAs. In this thesis, the Nios II soft-core processor from Altera Corporation was studied and a VHDL implementation, called UW_Nios II, was developed. UW_Nios II was developed to enable us to perform design space exploration (DSE) for the Nios II processor. It was evaluated and compared with Altera Nios II and shown to be competitive. SCBuild is an existing CAD tool that was developed to enable DSE of soft-core processors. We modified SCBuild to automatically explore the design space of the UW_Nios II using a genetic algorithm. This tool can accurately estimate the area and critical path delay of different variants of the UW_Nios II on a field programmable gate array. Through experiments conducted using SCBuild, it was shown that employing a genetic algorithm to explore the design space of parameterized Nios II core, with a large design space, helps designers find optimized variants of UW_Nios II

HW-SW Emulation Framework for Temperature-Aware Design in MPSoCs

New tendencies envisage Multi-Processor Systems-On-Chip (MPSoCs) as a promising solution for the consumer electronics market. MPSoCs are complex to design, as they must execute multiple applications (games, video), while meeting additional design constraints (energy consumption, time-to-market). Moreover, the rise of temperature in the die for MPSoCs can seriously affect their final performance and reliability. In this paper, we present a new hardware-software emulation framework that allows designers a complete exploration of the thermal behavior of final MPSoC designs early in the design flow. The proposed framework uses FPGA emulation as the key element to model the hardware components of the considered MPSoC platform at multi-megahertz speeds. It automatically extracts detailed system statistics that are used as input to our software thermal library running in a host computer. This library calculates at run-time the temperature of on-chip components, based on the collected statistics from the emulated system and the final floorplan of the MPSoC. This enables fast testing of various thermal management techniques. Our results show speed-ups of three orders of magnitude compared to cycle-accurate MPSoC simulator

Combining FPGA prototyping and high-level simulation approaches for Design Space Exploration of MPSoCs

Modern embedded systems are parallel, component-based, heterogeneous and finely tuned on the basis of the workload that must be executed on them. To improve design reuse, Application Specific Instruction-set Processors (ASIPs) are often employed as building blocks in such systems, as a solution capable of satisfying the required functional and physical constraints (e.g. throughput, latency, power or energy consumption etc.), while providing, at the same time, high flexibility and adaptability. Composing a multi-processor architecture including ASIPs and mapping parallel applications onto it is a design activity that require an extensive Design Space Exploration process (DSE), to result in cost-effective systems. The work described here aims at defining novel methodologies for the application-driven customizations of such highly heterogeneous embedded systems. The issue is tackled at different levels, integrating different tools. High-level event-based simulation is a widely used technique that offers speed and flexibility as main points of strength, but needs, as a preliminary input and periodically during the iteration process, calibration data that must be acquired by means of more accurate evaluation methods. Typically, this calibration is performed using instruction-level cycleaccurate simulators that, however, turn out to be very slow, especially when complete multiprocessor systems must be evaluated or when the grain of the calibration is too fine, while FPGA approaches have shown to performbetter for this particular applications. FPGA-based emulation techniques have been proposed in the recent past as an alternative solution to the software-based simulation approach, but some further steps are needed before they can be effectively exploitedwithin architectural design space exploration. Firstly, some kind of technology-awareness must be introduced, to enable the translation of the emulation results into a pre-estimation of a prospective ASIC implementation of the design. Moreover, when performing architectural DSE, a significant number of different candidate design points has to be evaluated and compared. In this case, if no countermeasures are taken, the advantages achievable with FPGAs, in terms of emulation speed, are counterbalanced by the overhead introduced by the time needed to go through the physical synthesis and implementation flow. Developed FPGA-based prototyping platform overcomes such limitations, enabling the use of FPGA-based prototyping for micro-architectural design space exploration of ASIP processors. In this approach, to increase the emulation speed-up, two different methods are proposed: the first is based on automatic instantiation of additional hardware modules, able to reconfigure at runtime the prototype, while the second leverages manipulation of application binary code, compiled for a custom VLIW ASIP architecture, that is transformed into code executable on a different configuration. This allows to prototype a whole set of ASIP solutions after one single FPGA implementation flow, mitigating the afore-mentioned overhead.A short overview on the tools used throughout the work will also be offered, covering basic aspects of Intel-Silicon Hive ASIP development toolchain, SESAME framework general description, along with a review of state-of-art simulation and prototyping techniques for complex multi-processor systems. Each proposed approach will be validated through a real-world use case, confirming the validity of this solution

Combining FPGA prototyping and high-level simulation approaches for Design Space Exploration of MPSoCs

Modern embedded systems are parallel, component-based, heterogeneous and finely tuned on the basis of the workload that must be executed on them. To improve design reuse, Application Specific Instruction-set Processors (ASIPs) are often employed as building blocks in such systems, as a solution capable of satisfying the required functional and physical constraints (e.g. throughput, latency, power or energy consumption etc.), while providing, at the same time, high flexibility and adaptability. Composing a multi-processor architecture including ASIPs and mapping parallel applications onto it is a design activity that require an extensive Design Space Exploration process (DSE), to result in cost-effective systems. The work described here aims at defining novel methodologies for the application-driven customizations of such highly heterogeneous embedded systems. The issue is tackled at different levels, integrating different tools. High-level event-based simulation is a widely used technique that offers speed and flexibility as main points of strength, but needs, as a preliminary input and periodically during the iteration process, calibration data that must be acquired by means of more accurate evaluation methods. Typically, this calibration is performed using instruction-level cycleaccurate simulators that, however, turn out to be very slow, especially when complete multiprocessor systems must be evaluated or when the grain of the calibration is too fine, while FPGA approaches have shown to performbetter for this particular applications. FPGA-based emulation techniques have been proposed in the recent past as an alternative solution to the software-based simulation approach, but some further steps are needed before they can be effectively exploitedwithin architectural design space exploration. Firstly, some kind of technology-awareness must be introduced, to enable the translation of the emulation results into a pre-estimation of a prospective ASIC implementation of the design. Moreover, when performing architectural DSE, a significant number of different candidate design points has to be evaluated and compared. In this case, if no countermeasures are taken, the advantages achievable with FPGAs, in terms of emulation speed, are counterbalanced by the overhead introduced by the time needed to go through the physical synthesis and implementation flow. Developed FPGA-based prototyping platform overcomes such limitations, enabling the use of FPGA-based prototyping for micro-architectural design space exploration of ASIP processors. In this approach, to increase the emulation speed-up, two different methods are proposed: the first is based on automatic instantiation of additional hardware modules, able to reconfigure at runtime the prototype, while the second leverages manipulation of application binary code, compiled for a custom VLIW ASIP architecture, that is transformed into code executable on a different configuration. This allows to prototype a whole set of ASIP solutions after one single FPGA implementation flow, mitigating the afore-mentioned overhead.A short overview on the tools used throughout the work will also be offered, covering basic aspects of Intel-Silicon Hive ASIP development toolchain, SESAME framework general description, along with a review of state-of-art simulation and prototyping techniques for complex multi-processor systems. Each proposed approach will be validated through a real-world use case, confirming the validity of this solution

Co-simulation techniques based on virtual platforms for SoC design and verification in power electronics applications

En las últimas décadas, la inversión en el ámbito energético ha aumentado considerablemente. Actualmente, existen numerosas empresas que están desarrollando equipos como convertidores de potencia o máquinas eléctricas con sistemas de control de última generación. La tendencia actual es usar System-on-chips y Field Programmable Gate Arrays para implementar todo el sistema de control. Estos dispositivos facilitan el uso de algoritmos de control más complejos y eficientes, mejorando la eficiencia de los equipos y habilitando la integración de los sistemas renovables en la red eléctrica. Sin embargo, la complejidad de los sistemas de control también ha aumentado considerablemente y con ello la dificultad de su verificación. Los sistemas Hardware-in-the-loop (HIL) se han presentado como una solución para la verificación no destructiva de los equipos energéticos, evitando accidentes y pruebas de alto coste en bancos de ensayo. Los sistemas HIL simulan en tiempo real el comportamiento de la planta de potencia y su interfaz para realizar las pruebas con la placa de control en un entorno seguro. Esta tesis se centra en mejorar el proceso de verificación de los sistemas de control en aplicaciones de electrónica potencia. La contribución general es proporcionar una alternativa a al uso de los HIL para la verificación del hardware/software de la tarjeta de control. La alternativa se basa en la técnica de Software-in-the-loop (SIL) y trata de superar o abordar las limitaciones encontradas hasta la fecha en el SIL. Para mejorar las cualidades de SIL se ha desarrollado una herramienta software denominada COSIL que permite co-simular la implementación e integración final del sistema de control, sea software (CPU), hardware (FPGA) o una mezcla de software y hardware, al mismo tiempo que su interacción con la planta de potencia. Dicha plataforma puede trabajar en múltiples niveles de abstracción e incluye soporte para realizar co-simulación mixtas en distintos lenguajes como C o VHDL. A lo largo de la tesis se hace hincapié en mejorar una de las limitaciones de SIL, su baja velocidad de simulación. Se proponen diferentes soluciones como el uso de emuladores software, distintos niveles de abstracción del software y hardware, o relojes locales en los módulos de la FPGA. En especial se aporta un mecanismo de sincronizaron externa para el emulador software QEMU habilitando su emulación multi-core. Esta aportación habilita el uso de QEMU en plataformas virtuales de co-simulacion como COSIL. Toda la plataforma COSIL, incluido el uso de QEMU, se ha analizado bajo diferentes tipos de aplicaciones y bajo un proyecto industrial real. Su uso ha sido crítico para desarrollar y verificar el software y hardware del sistema de control de un convertidor de 400 kVA

ControlPULP: A RISC-V On-Chip Parallel Power Controller for Many-Core HPC Processors with FPGA-Based Hardware-In-The-Loop Power and Thermal Emulation

High-Performance Computing (HPC) processors are nowadays integrated Cyber-Physical Systems demanding complex and high-bandwidth closed-loop power and thermal control strategies. To efficiently satisfy real-time multi-input multi-output (MIMO) optimal power requirements, high-end processors integrate an on-die power controller system (PCS). While traditional PCSs are based on a simple microcontroller (MCU)-class core, more scalable and flexible PCS architectures are required to support advanced MIMO control algorithms for managing the ever-increasing number of cores, power states, and process, voltage, and temperature variability. This paper presents ControlPULP, an open-source, HW/SW RISC-V parallel PCS platform consisting of a single-core MCU with fast interrupt handling coupled with a scalable multi-core programmable cluster accelerator and a specialized DMA engine for the parallel acceleration of real-time power management policies. ControlPULP relies on FreeRTOS to schedule a reactive power control firmware (PCF) application layer. We demonstrate ControlPULP in a power management use-case targeting a next-generation 72-core HPC processor. We first show that the multi-core cluster accelerates the PCF, achieving 4.9x speedup compared to single-core execution, enabling more advanced power management algorithms within the control hyper-period at a shallow area overhead, about 0.1% the area of a modern HPC CPU die. We then assess the PCS and PCF by designing an FPGA-based, closed-loop emulation framework that leverages the heterogeneous SoCs paradigm, achieving DVFS tracking with a mean deviation within 3% the plant's thermal design power (TDP) against a software-equivalent model-in-the-loop approach. Finally, we show that the proposed PCF compares favorably with an industry-grade control algorithm under computational-intensive workloads.Comment: 33 pages, 11 figure

GVSoC: A Highly Configurable, Fast and Accurate Full-Platform Simulator for RISC-V based IoT Processors

open6siembargoed_20220427Bruschi, Nazareno; Haugou, Germain; Tagliavini, Giuseppe; Conti, Francesco; Benini, Luca; Rossi, DavideBruschi, Nazareno; Haugou, Germain; Tagliavini, Giuseppe; Conti, Francesco; Benini, Luca; Rossi, David