Efficient FPGA Implementation of a CTC Turbo Decoder for WiMAX/LTE Mobile Systems

This chapter describes the implementation on field programmable gate array (FPGA) of a turbo decoder for 3GPP long-term evolution (LTE) standard, respectively, for IEEE 802.16-based WiMAX systems. We initially present the serial decoding architectures for the two systems. The same approach is used; although for WiMAX the scheme implements a duo-binary code, while for LTE a binary code is included. The proposed LTE serial decoding scheme is adapted for parallel transformation. Then, considering the LTE high throughput requirements, a parallel decoding solution is proposed. Considering a parallelization with N = 2p levels, the parallel approach reduces the decoding latency N times versus the serial decoding one. For parallel approach the decoding performance suffers a small degradation, but we propose a solution that almost eliminates this degradation, by performing an overlapped data block split. Moreover, considering the native properties of the LTE quadratic permutation polynomial (QPP) interleaver, we propose a simplified parallel decoder architecture. The novelty of this scheme is that only one interleaver module is used, no matter the value of N, by introducing an even-odd merge sorting network. We propose for it a recursive approach that uses only comparators and subtractors

Reconfigurable Computing for Speech Recognition: Preliminary Findings

Continuous real-time speech recognition is a highly computationally-demanding task, but one which can take good advantage of a parallel processing system. To this end, we describe proposals for, and preliminary findings of, research in implementing in programmable logic the decoder part of a speech recognition system. Recognition via Viterbi decoding of Hidden Markov Models is outlined, along with details of current implementations, which aim to exploit properties of the algorithm that could make it well-suited for devices such as FPGAs. The question of how to deal with limited resources, by reconfiguration or otherwise, is also addressed

Further Specialization of Clustered VLIW Processors: A MAP Decoder for Software Defined Radio

Turbo codes are extensively used in current communications standards and have a promising outlook for future generations. The advantages of software defined radio, especially dynamic reconfiguration, make it very attractive in this multi-standard scenario. However, the complex and power consuming implementation of the maximum a posteriori (MAP) algorithm, employed by turbo decoders, sets hurdles to this goal. This work introduces an ASIP architecture for the MAP algorithm, based on a dual-clustered VLIW processor. It displays the good performance of application specific designs along with the versatility of processors, which makes it compliant with leading edge standards. The machine deals with multi-operand instructions in an innovative way, the fetching and assertion of data is serialized and the addressing is automatized and transparent for the programmer. The performance-area trade-off of the proposed architecture achieves a throughput of 8 cycles per symbol with very low power dissipation

Exploring High Level Synthesis to Improve the Design of Turbo Code Error Correction in a Software Defined Radio Context

With the ever improving progress of technology, Software Defined Radio (SDR) has become a more widely available technique for implementing radio communication. SDRs are sought after for their advantages over traditional radio communication mostly in flexibility, and hardware simplification. The greatest challenges SDRs face are often with their real time performance requirements. Forward error correction is an example of an SDR block that can exemplify these challenges as the error correction can be very computationally intensive. Due to these constraints, SDR implementations are commonly found in or alongside Field Programmable Gate Arrays (FPGAs) to enable performance that general purpose processors alone cannot achieve. The main challenge with FPGAs however, is in Register Transfer Level (RTL) development. High Level Synthesis (HLS) tools are a method of creating hardware descriptions from high level code, in an effort to ease this development process. In this work a turbo code decoder, a form of computationally intensive error correction codes, was accelerated with the help of FPGAs, using HLS tools. This accelerator was implemented on a Xilinx Zynq platform, which integrates a hard core ARM processor alongside programmable logic on a single chip. Important aspects of the design process using HLS were identified and explained. The design process emphasizes the idea that for the best results the high level code should be created with a hardware mindset, and written in an attempt to describe a hardware design. The power of the HLS tools was demonstrated in its flexibility by providing a method of tailoring the hardware parameters through simply changing values in a macro file, and by exploration the design space through different data types and three different designs, each one improving from what was learned in the previous implementation. Ultimately, the best hardware implementation was over 56 times faster than the optimized software implementation. Comparing the HLS to a manually optimized design shows that the HLS implementation was able to achieve over a 19% throughput, with many areas for further improvement identified, demonstrating the competitiveness of the HLS tools

System capacity enhancement for 5G network and beyond

A thesis submitted to the University of Bedfordshire, in fulfilment of the requirements for the degree of Doctor of PhilosophyThe demand for wireless digital data is dramatically increasing year over year. Wireless communication systems like Laptops, Smart phones, Tablets, Smart watch, Virtual Reality devices and so on are becoming an important part of people’s daily life. The number of mobile devices is increasing at a very fast speed as well as the requirements for mobile devices such as super high-resolution image/video, fast download speed, very short latency and high reliability, which raise challenges to the existing wireless communication networks. Unlike the previous four generation communication networks, the fifth-generation (5G) wireless communication network includes many technologies such as millimetre-wave communication, massive multiple-input multiple-output (MIMO), visual light communication (VLC), heterogeneous network (HetNet) and so forth. Although 5G has not been standardised yet, these above technologies have been studied in both academia and industry and the goal of the research is to enhance and improve the system capacity for 5G networks and beyond by studying some key problems and providing some effective solutions existing in the above technologies from system implementation and hardware impairments’ perspective. The key problems studied in this thesis include interference cancellation in HetNet, impairments calibration for massive MIMO, channel state estimation for VLC, and low latency parallel Turbo decoding technique. Firstly, inter-cell interference in HetNet is studied and a cell specific reference signal (CRS) interference cancellation method is proposed to mitigate the performance degrade in enhanced inter-cell interference coordination (eICIC). This method takes carrier frequency offset (CFO) and timing offset (TO) of the user’s received signal into account. By reconstructing the interfering signal and cancelling it afterwards, the capacity of HetNet is enhanced. Secondly, for massive MIMO systems, the radio frequency (RF) impairments of the hardware will degrade the beamforming performance. When operated in time duplex division (TDD) mode, a massive MIMO system relies on the reciprocity of the channel which can be broken by the transmitter and receiver RF impairments. Impairments calibration has been studied and a closed-loop reciprocity calibration method is proposed in this thesis. A test device (TD) is introduced in this calibration method that can estimate the transmitters’ impairments over-the-air and feed the results back to the base station via the Internet. The uplink pilots sent by the TD can assist the BS receivers’ impairment estimation. With both the uplink and downlink impairments estimates, the reciprocity calibration coefficients can be obtained. By computer simulation and lab experiment, the performance of the proposed method is evaluated. Channel coding is an essential part of a wireless communication system which helps fight with noise and get correct information delivery. Turbo codes is one of the most reliable codes that has been used in many standards such as WiMAX and LTE. However, the decoding process of turbo codes is time-consuming and the decoding latency should be improved to meet the requirement of the future network. A reverse interleave address generator is proposed that can reduce the decoding time and a low latency parallel turbo decoder has been implemented on a FPGA platform. The simulation and experiment results prove the effectiveness of the address generator and show that there is a trade-off between latency and throughput with a limited hardware resource. Apart from the above contributions, this thesis also investigated multi-user precoding for MIMO VLC systems. As a green and secure technology, VLC is achieving more and more attention and could become a part of 5G network especially for indoor communication. For indoor scenario, the MIMO VLC channel could be easily ill-conditioned. Hence, it is important to study the impact of the channel state to the precoding performance. A channel state estimation method is proposed based on the signal to interference noise ratio (SINR) of the users’ received signal. Simulation results show that it can enhance the capacity of the indoor MIMO VLC system