1,567 research outputs found
A survey on fractional order control techniques for unmanned aerial and ground vehicles
In recent years, numerous applications of science and engineering for modeling and control of unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs) systems based on fractional calculus have been realized. The extra fractional order derivative terms allow to optimizing the performance of the systems. The review presented in this paper focuses on the control problems of the UAVs and UGVs that have been addressed by the fractional order techniques over the last decade
Comprehensive review on controller for leader-follower robotic system
985-1007This paper presents a comprehensive review of the leader-follower robotics system. The aim of this paper is to find and elaborate on the current trends in the swarm robotic system, leader-follower, and multi-agent system. Another part of this review will focus on finding the trend of controller utilized by previous researchers in the leader-follower system. The controller that is commonly applied by the researchers is mostly adaptive and non-linear controllers. The paper also explores the subject of study or system used during the research which normally employs multi-robot, multi-agent, space flying, reconfigurable system, multi-legs system or unmanned system. Another aspect of this paper concentrates on the topology employed by the researchers when they conducted simulation or experimental studies
Using a Combination of PID Control and Kalman Filter to Design of IoT-based Telepresence Self-balancing Robots during COVID-19 Pandemic
COVID-19 is a very dangerous respiratory disease that can spread quickly through the air. Doctors, nurses, and medical personnel need protective clothing and are very careful in treating COVID-19 patients to avoid getting infected with the COVID-19 virus. Hence, a medical telepresence robot, which resembles a humanoid robot, is necessary to treat COVID-19 patients. The proposed self-balancing COVID-19 medical telepresence robot is a medical robot that handles COVID-19 patients, which resembles a stand-alone humanoid soccer robot with two wheels that can maneuver freely in hospital hallways. The proposed robot design has some control problems; it requires steady body positioning and is subjected to disturbance. A control method that functions to find the stability value such that the system response can reach the set-point is required to control the robot's stability and repel disturbances; this is known as disturbance rejection control. This study aimed to control the robot using a combination of Proportional-Integral-Derivative (PID) control and a Kalman filter. Mathematical equations were required to obtain a model of the robot's characteristics. The state-space model was derived from the self-balancing robot's mathematical equation. Since a PID control technique was used to keep the robot balanced, this state-space model was converted into a transfer function model. The second Ziegler-Nichols's rule oscillation method was used to tune the PID parameters. The values of the amplifier constants obtained were Kp=31.002, Ki=5.167, and Kd=125.992128. The robot was designed to be able to maintain its balance for more than one hour by using constant tuning, even when an external disturbance is applied to it. Doi: 10.28991/esj-2021-SP1-016 Full Text: PD
Sliding Mode Control
The main objective of this monograph is to present a broad range of well worked out, recent application studies as well as theoretical contributions in the field of sliding mode control system analysis and design. The contributions presented here include new theoretical developments as well as successful applications of variable structure controllers primarily in the field of power electronics, electric drives and motion steering systems. They enrich the current state of the art, and motivate and encourage new ideas and solutions in the sliding mode control area
Disturbance Observer-based Robust Control and Its Applications: 35th Anniversary Overview
Disturbance Observer has been one of the most widely used robust control
tools since it was proposed in 1983. This paper introduces the origins of
Disturbance Observer and presents a survey of the major results on Disturbance
Observer-based robust control in the last thirty-five years. Furthermore, it
explains the analysis and synthesis techniques of Disturbance Observer-based
robust control for linear and nonlinear systems by using a unified framework.
In the last section, this paper presents concluding remarks on Disturbance
Observer-based robust control and its engineering applications.Comment: 12 pages, 4 figure
Advanced Line-Follower Robot
In this research, an Advanced Line-follower Robot (ALFR) was designed and built. The ALFR mainly consists of the sensor array (QTR-8A), the high-performance microchips (TMS320f28335, TMS320f28069) and two motors (BLY172S-24V-4000). The ALFR keeps the basic function of the Line-follower Robot (LFR) but applies more advanced control theories, such as Proportional Integral Derivative (PID), Active Disturbance Rejection Control (ADRC) and Iterative Learning Control (ILC). PID and ADRC have been tested in the ALFR. The ALFR control problems and the results have been discussed in this thesis. Suggestions are also provided for research on unsolved problems. In particular, the mathematical models of ALFR have been established for both position and speed control. The solutions based on PID, ADRC and ILC are proposed and tested in simulation. The main objective of this thesis is realized in combining methods from control theories with realities in the context of formulating and solving practical problems in a physical process
Modelling and robust controller design for an underactuated self-balancing robot with uncertain parameter estimation
A comprehensive literature review of self-balancing robot (SBR) provides an insight to the strengths and limitations of the available control techniques for different applications. Most of the researchers have not included the payload and its variations in their investigations. To address this problem comprehensively, it was realized that a rigorous mathematical model of the SBR will help to design an effective control for the targeted system. A robust control for a two-wheeled SBR with unknown payload parameters is considered in these investigations. Although, its mechanical design has the advantage of additional maneuverability, however, the robot's stability is affected by changes in the rider's mass and height, which affect the robot's center of gravity (COG). Conventionally, variations in these parameters impact the performance of the controller that are designed with the assumption to operate under nominal values of the rider's mass and height. The proposed solution includes an extended Kalman filter (EKF) based sliding mode controller (SMC) with an extensive mathematical model describing the dynamics of the robot itself and the payload. The rider's mass and height are estimated using EKF and this information is used to improve the control of SBR. Significance of the proposed method is demonstrated by comparing simulation results with the conventional SMC under different scenarios as well as with other techniques in literature. The proposed method shows zero steady state error and no overshoot. Performance of the conventional SMC is improved with controller parameter estimation. Moreover, the stability issue in the reaching phase of the controller is also solved with the availability of parameter estimates. The proposed method is suitable for a wide range of indoor applications with no disturbance. This investigation provides a comprehensive comparison of available techniques to contextualize the proposed method within the scope of self-balancing robots for indoor applications
Robotics 2010
Without a doubt, robotics has made an incredible progress over the last decades. The vision of developing, designing and creating technical systems that help humans to achieve hard and complex tasks, has intelligently led to an incredible variety of solutions. There are barely technical fields that could exhibit more interdisciplinary interconnections like robotics. This fact is generated by highly complex challenges imposed by robotic systems, especially the requirement on intelligent and autonomous operation. This book tries to give an insight into the evolutionary process that takes place in robotics. It provides articles covering a wide range of this exciting area. The progress of technical challenges and concepts may illuminate the relationship between developments that seem to be completely different at first sight. The robotics remains an exciting scientific and engineering field. The community looks optimistically ahead and also looks forward for the future challenges and new development
Discrete-time Robust PD Controlled System with DOB/CDOB Compensation for High Speed Autonomous Vehicle Path Following
Autonomous vehicle path following performance is one of significant
consideration. This paper presents discrete time design of robust PD controlled
system with disturbance observer (DOB) and communication disturbance observer
(CDOB) compensation to enhance autonomous vehicle path following performance.
Although always implemented on digital devices, DOB and CDOB structure are
usually designed in continuous time in the literature and also in our previous
work. However, it requires high sampling rate for continuous-time design block
diagram to automatically convert to corresponding discrete-time controller
using rapid controller prototyping systems. In this paper, direct discrete time
design is carried out. Digital PD feedback controller is designed based on the
nominal plant using the proposed parameter space approach. Zero order hold
method is applied to discretize the nominal plant, DOB and CDOB structure in
continuous domain. Discrete time DOB is embedded into the steering to path
following error loop for model regulation in the presence of uncertainty in
vehicle parameters such as vehicle mass, vehicle speed and road-tire friction
coefficient and rejecting external disturbance like crosswind force. On the
other hand, time delay from CAN bus based sensor and actuator command
interfaces results in degradation of system performance since large negative
phase angles are added to the plant frequency response. Discrete time CDOB
compensated control system can be used for time delay compensation where the
accurate knowledge of delay time value is not necessary. A validated model of
our lab Ford Fusion hybrid automated driving research vehicle is used for the
simulation analysis while the vehicle is driving at high speed. Simulation
results successfully demonstrate the improvement of autonomous vehicle path
following performance with the proposed discrete time DOB and CDOB structure
- …