Radio Sensor for Monitoring of UMTS Mobile Terminals

Relatively simple and low-cost radio sensor for monitoring of 3rd generation (3G) UMTS mobile terminals (i.e., phones) has been designed and practically tested. The main purpose of this sensor is to serve as an extending module that can be installed into systems used for monitoring of standard 2nd generation (2G) GSM and DCS mobile phones in highly guarded buildings and areas. Since the transmitted powers of UMTS mobile terminals can be very low in relation to GSM and DCS specifications, the new UMTS sensor is based on a highly sensitive receiver and additional signal processing. The radio sensor was practically tested in several scenarios representing worst-case mobile terminal - base station relations. The measured detection ranges attain values from approx. 11 m inside of rooms to more than 30 m in corridors, which seems to be sufficient for the expected application. Results of all performed tests correspond fairly well with the presented theoretical descriptions. An extended version of the radio sensor can be used for monitoring of mobile terminals of all existing voice or data formats

4. generációs mobil rendszerek kutatása = Research on 4-th Generation Mobile Systems

A 3G mobil rendszerek szabványosítása a végéhez közeledik, legalábbis a meghatározó képességek tekintetében. Ezért létfontosságú azon technikák, eljárások vizsgálata, melyek a következő, 4G rendszerekben meghatározó szerepet töltenek majd be. Több ilyen kutatási irányvonal is létezik, ezek közül projektünkben a fontosabbakra koncentráltunk. A következőben felsoroljuk a kutatott területeket, és röviden összegezzük az elért eredményeket. Szórt spektrumú rendszerek Kifejlesztettünk egy új, rádiós interfészen alkalmazható hívásengedélyezési eljárást. Szimulációs vizsgálatokkal támasztottuk alá a megoldás hatékonyságát. A projektben kutatóként résztvevő Jeney Gábor sikeresen megvédte Ph.D. disszertációját neurális hálózatokra épülő többfelhasználós detekciós technikák témában. Az elért eredmények Imre Sándor MTA doktori disszertációjába is beépültek. IP alkalmazása mobil rendszerekben Továbbfejlesztettük, teszteltük és általánosítottuk a projekt keretében megalkotott új, gyűrű alapú topológiára épülő, a jelenleginél nagyobb megbízhatóságú IP alapú hozzáférési koncepciót. A témakörben Szalay Máté Ph.D. disszertációja már a nyilvános védésig jutott. Kvantum-informatikai módszerek alkalmazása 3G/4G detekcióra Új, kvantum-informatikai elvekre épülő többfelhasználós detekciós eljárást dolgoztunk ki. Ehhez új kvantum alapú algoritmusokat is kifejlesztettünk. Az eredményeket nemzetközi folyóiratok mellett egy saját könyvben is publikáltuk. | The project consists of three main research directions. Spread spectrum systems: we developed a new call admission control method for 3G air interfaces. Project member Gabor Jeney obtained the Ph.D. degree and project leader Sandor Imre submitted his DSc theses from this area. Application of IP in mobile systems: A ring-based reliable IP mobility mobile access concept and corresponding protocols have been developed. Project member Máté Szalay submitted his Ph.D. theses from this field. Quantum computing based solutions in 3G/4G detection: Quantum computing based multiuser detection algorithm was developed. Based on the results on this field a book was published at Wiley entitled: 'Quantum Computing and Communications - an engineering approach'

An IOT based Solar Integrated Home Security System by using GSM Module and Raspberry pi

At present the world advancement depends on its technology. IoT (Internet of Things) is the latest technology which connects the devices over a network using cloud computing and web applications to for efficient operation. Home security systems comprise a GSM module and Raspberry Pi with relay which is door security sensors. These systems can response rapidly when burglar intrudes in a home, office etc. And alerts the respective holder. Suspected activities are conveyed to user through SMS or CALL or SNAP SHOT of the burglar to the mobile by using GSM technology the total system is operated a single credit card sized computer that is Raspberry Pi

Equalization of Third-Order Intermodulation Products in Wideband Direct Conversion Receivers

This paper reports a SAW-less direct-conversion receiver which utilizes a mixed-signal feedforward path to regenerate and adaptively cancel IM3 products, thus accomplishing system-level linearization. The receiver system performance is dominated by a custom integrated RF front end implemented in 130-nm CMOS and achieves an uncorrected out-of-band IIP3 of -7.1 dBm under the worst-case UMTS FDD Region 1 blocking specifications. Under IM3 equalization, the receiver achieves an effective IIP3 of +5.3 dBm and meets the UMTS BER sensitivity requirement with 3.7 dB of margin

Cell degradation detection based on an inter-cell approach

Fault management is a crucial part of cellular network management systems. The status of the base stations is usually monitored by well-defined key performance indicators (KPIs). The approaches for cell degradation detection are based on either intra-cell or inter-cell analysis of the KPIs. In intra-cell analysis, KPI profiles are built based on their local history data whereas in inter-cell analysis, KPIs of one cell are compared with the corresponding KPIs of the other cells. In this work, we argue in favor of the inter-cell approach and apply a degradation detection method that is able to detect a sleeping cell that could be difficult to observe using traditional intra-cell methods. We demonstrate its use for detecting emulated degradations among performance data recorded from a live LTE network. The method can be integrated in current systems because it can operate using existing KPIs without any major modification to the network infrastructure