74 research outputs found
Recommended from our members
Static, dynamic and levitation characteristics of squeeze film air journal bearing: Designing, modelling, simulation and fluid solid interaction
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Bearings today need to be able to run at very high speed, providing high positional accuracy for the structure that it supports, and requiring very little or no maintenance. For this to happen, bearings must have tight tolerances and very low or zero friction during operation. This pushes many traditional contact-type bearings to their limits as they often fail due to friction, generating heat and causing wear.
By comparison, existing non-contact bearings fare better because of their very low or zero friction. But some have their own problem too. For example, the fact that aerostatic bearings require an air supply means having to use a separate air compressor and connecting hoses. This makes the installation bulky. Aerodynamic and hydrodynamic bearings cannot support loads at zero speed. Both hydrodynamic and hydrostatic bearings may cause contamination to the work-pieces and the work environment because of the use of lubricating fluid.
A potential solution to the above-mentioned problems is the new squeeze film air bearing. It works on the rapid squeeze action of an air film to produce separation between two metal surfaces. This has the benefit of being compact with a very simple configuration because it does not require an external pressurized air supply, can support loads at zero speed and is free of contamination.
For this research, two squeeze film air journal bearings, made from material of Al 2024 â T3 and Cu - C101 with the same geometry, were designed. The bearing is in the shape of a round tube with three fins on the outer surface and the journal, a round rod. When excited at a certain normal mode, the bearing shell flexes with a desirable modal shape for the squeeze film action. The various modes of vibration of Al bearing were obtained from a finite-element model implemented in ANSYS. Two Modes, the 13th and 23rd, at the respective frequencies of 16.320 kHz and 25.322 kHz, were identified for further investigation by experiments with respect to the squeeze film thickness and its load-carrying capacity. For Cu bearing, the two Modes are also 13th and 23rd at the respective frequencies of 12.184 kHz and 18.459 kHz.
In order to produce dynamic deformation of the bearings at their modes, a single layer piezoelectric actuator was used as a driver. The maximum stroke length and the maximum blocking force of the single layer piezoelectric actuator were determined using manual calculation and ANSYS simulation.
In the coupled-field analysis, the single layer piezoelectric actuator was mounted on the outside surface of the bearing shell and loaded with an AC and a DC voltage in order to produce the static and dynamic deformation. For the static analysis, the maximum deformation of Al bearing shell is 0.124 ÎŒm when the actuators are driven at the DC of 75 V. For the dynamic analysis, the actuators are driven at three levels of AC, namely 55, 65 and 75V with a constant DC offset of 75V and the driving frequency coincided with the modal frequency of the bearing. The maximum dynamic deformation of Al bearing shell is 3.22ÎŒm at Mode 13 and 2.08ÎŒm at Mode 23 when the actuators were driven at the AC of 75 V and the DC of 75 V. Similarly, the FEA simulation was used for analyzing Cu bearing. Furthermore, the dynamic deformation of both Al and Cu bearing at Mode 13 and 23 are validated by experiments.
This research developed two theoretical models that explain the existence of a net pressure in a squeeze film for the levitation. The first model uses the ideal gas law as first approximation whilst the second uses the CFX simulation to provide a more exact explanation.
In terms of the load-carrying capacity, Mode 13 was identified to be better than Mode 23 for both bearings. However, at Mode 13, Al bearing has a higher load-carrying capacity than Cu bearing. This is due to Al bearing having a higher modal frequency and amplitude.
Finally, the coupled-field analysis for fluid solid interaction (FSI) was studied at both Mode 13 and 23 for Al bearing. The findings are that: a) the fluid force in the squeeze film can affect the dynamic deformation of the bearing shell, especially at high oscillation frequency, more at Mode 13 than at Mode 23 due to the relatively high pressure end-leakage in the latter; b) the dynamic deformation of the bearing shell increases with the gap clearance in a logarithmic manner at Mode 13; and c) the micron levels of gap clearance provide a damping effect on the dynamic deformation of the bearing shell at Mode 13 and at Mode 23, though much less dominant
Investigation of non-contact bearing systems based on ultrasonic levitation
Su ZhaoPaderborn, Univ., Diss., 201
Recommended from our members
Measuring the viscous flow behaviour of molten metals under shear
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The flow behaviour of liquid metals (Sn, Pb and Sn-Pb eutectic) under different shearing conditions is investigated. Experiments were performed with two designs of concentric cylinder viscometers: rotating the inner cylinder (Searle) and rotating the outer cylinder (Couette). The latter technique is uncommon and the equipment was optimised with standard oils. The flow behaviour for the metals differs in the two systems. The curves of âapparentâ viscosity versus shear rate may be divided into two regimes: I. At lower shear rates (<200 s-1): a reduction of âapparentâ viscosity with shear was observed with both viscometers. It is suggested that the high density and high surface tension of the metals and eccentricity between the cylinders at low shear rates, leads to instabilities. Results at low shear rates were therefore discarded and further detailed analysis would be required for a fuller understanding of this behaviour. II. At higher shear rates: a steady, shear-independent behaviour of âapparentâ viscosity with shear rate is observed in the Couette system (upto 600 s-1) whereas in the Searle system the âapparentâ viscosity increases with shear rate (upto 2600 s-1). From hydrodynamic theory about Newtonian fluids, it is suggested that in the Searle type viscometer, the fluid is unstable and Taylor vortices are expected at low shear rates (~80 s-1). This gives rise to an increase in the âapparentâ viscosity with shear rate. Whereas, in the Couette type, the flow is more stable, resulting in a steady âapparentâ viscosity. This interpretation is consistent with liquid metals behaving as Newtonian fluids, but further research is required to confirm this. The author suggests further experiments, with the prime one being the investigation of the fluid with counter and co-rotation of the cylinders in order to observe more complex flows. The results are expected to have implications in the modelling of flow for liquid metal processes, especially the initiation of Taylor vortices under the unstable flow conditions produced by rotating the inner cylinder
NASA Tech Briefs, December 1988
This month's technical section includes forecasts for 1989 and beyond by NASA experts in the following fields: Integrated Circuits; Communications; Computational Fluid Dynamics; Ceramics; Image Processing; Sensors; Dynamic Power; Superconductivity; Artificial Intelligence; and Flow Cytometry. The quotes provide a brief overview of emerging trends, and describe inventions and innovations being developed by NASA, other government agencies, and private industry that could make a significant impact in coming years. A second bonus feature in this month's issue is the expanded subject index that begins on page 98. The index contains cross-referenced listings for all technical briefs appearing in NASA Tech Briefs during 1988
Benzocyclobutene-based Electric Micromachines Supported on Microball Bearings: Design, Fabrication, and Characterization
This dissertation summarizes the research activities that led to the development of the first microball-bearing-supported linear electrostatic micromotor with benzocyclobutene (BCB) low-k polymer insulating layers. The primary application of this device is long-range, high-speed linear micropositioning. The future generations of this device include rotary electrostatic micromotors and microgenerators.
The development of the first generation of microball-bearing-supported micromachines, including device theory, design, and modeling, material characterization, process development, device fabrication, and device test and characterization is presented. The first generation of these devices is based on a 6-phase, bottom-drive, linear, variable-capacitance micromotor (B-LVCM). The design of the electrical and mechanical components of the micromotor, lumped-circuit modeling of the device and electromechanical characteristics, including variable capacitance, force, power, and speed are presented. Electrical characterization of BCB polymers, characterization of BCB chemical mechanical planarization (CMP), development of embedded BCB in silicon (EBiS) process, and integration of device components using microfabrication techniques are also presented.
The micromotor consists of a silicon stator, a silicon slider, and four stainless-steel microballs. The aligning force profile of the micromotor was extracted from simulated and measured capacitances of all phases. An average total aligning force of 0.27 mN with a maximum of 0.41 mN, assuming a 100 V peak-to-peak square-wave voltage, was measured. The operation of the micromotor was verified by applying square-wave voltages and characterizing the slider motion. An average slider speed of 7.32 mm/s when excited by a 40 Hz, 120 V square-wave voltage was reached without losing the synchronization.
This research has a pivotal impact in the field of power microelectromechanical systems (MEMS). It establishes the foundation for the development of more reliable, efficient electrostatic micromachines with variety of applications such as micropropulsion, high-speed micropumping, microfluid delivery, and microsystem power generation
12th International Conference on Vibrations in Rotating Machinery
Since 1976, the Vibrations in Rotating Machinery conferences have successfully brought industry and academia together to advance state-of-the-art research in dynamics of rotating machinery. 12th International Conference on Vibrations in Rotating Machinery contains contributions presented at the 12th edition of the conference, from industrial and academic experts from different countries. The book discusses the challenges in rotor-dynamics, rub, whirl, instability and more. The topics addressed include: - Active, smart vibration control - Rotor balancing, dynamics, and smart rotors - Bearings and seals - Noise vibration and harshness - Active and passive damping - Applications: wind turbines, steam turbines, gas turbines, compressors - Joints and couplings - Challenging performance boundaries of rotating machines - High power density machines - Electrical machines for aerospace - Management of extreme events - Active machines - Electric supercharging - Blades and bladed assemblies (forced response, flutter, mistuning) - Fault detection and condition monitoring - Rub, whirl and instability - Torsional vibration Providing the latest research and useful guidance, 12th International Conference on Vibrations in Rotating Machinery aims at those from industry or academia that are involved in transport, power, process, medical engineering, manufacturing or construction
Index to 1985 NASA Tech Briefs, volume 10, numbers 1-4
Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1985 Tech Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences
12th International Conference on Vibrations in Rotating Machinery
Since 1976, the Vibrations in Rotating Machinery conferences have successfully brought industry and academia together to advance state-of-the-art research in dynamics of rotating machinery. 12th International Conference on Vibrations in Rotating Machinery contains contributions presented at the 12th edition of the conference, from industrial and academic experts from different countries. The book discusses the challenges in rotor-dynamics, rub, whirl, instability and more. The topics addressed include: - Active, smart vibration control - Rotor balancing, dynamics, and smart rotors - Bearings and seals - Noise vibration and harshness - Active and passive damping - Applications: wind turbines, steam turbines, gas turbines, compressors - Joints and couplings - Challenging performance boundaries of rotating machines - High power density machines - Electrical machines for aerospace - Management of extreme events - Active machines - Electric supercharging - Blades and bladed assemblies (forced response, flutter, mistuning) - Fault detection and condition monitoring - Rub, whirl and instability - Torsional vibration Providing the latest research and useful guidance, 12th International Conference on Vibrations in Rotating Machinery aims at those from industry or academia that are involved in transport, power, process, medical engineering, manufacturing or construction
- âŠ