938 research outputs found

    Experimental Evaluation of Large Scale WiFi Multicast Rate Control

    Full text link
    WiFi multicast to very large groups has gained attention as a solution for multimedia delivery in crowded areas. Yet, most recently proposed schemes do not provide performance guarantees and none have been tested at scale. To address the issue of providing high multicast throughput with performance guarantees, we present the design and experimental evaluation of the Multicast Dynamic Rate Adaptation (MuDRA) algorithm. MuDRA balances fast adaptation to channel conditions and stability, which is essential for multimedia applications. MuDRA relies on feedback from some nodes collected via a light-weight protocol and dynamically adjusts the rate adaptation response time. Our experimental evaluation of MuDRA on the ORBIT testbed with over 150 nodes shows that MuDRA outperforms other schemes and supports high throughput multicast flows to hundreds of receivers while meeting quality requirements. MuDRA can support multiple high quality video streams, where 90% of the nodes report excellent or very good video quality

    Evaluation of error control mechanisms for 802.11b multicast transmissions

    Get PDF
    This article first presents several packet loss profiles collected during 802.11b multicast transmissions carried out under variable reception conditions (mobile and fixed receivers). Then, an original approach consisting in mapping a posteriori some error control mechanisms over these observations is presented. This approach allows to evaluate the performance of these mechanisms according to their parameters and various channel properties. It is shown in particular that relatively simple mechanisms based on retransmissions and/or error correcting codes of small length achieve very good performance in this context (92% of the best performance)

    Enhancement of Adaptive Forward Error Correction Mechanism for Video Transmission Over Wireless Local Area Network

    Get PDF
    Video transmission over the wireless network faces many challenges. The most critical challenge is related to packet loss. To overcome the problem of packet loss, Forward Error Correction is used by adding extra packets known as redundant packet or parity packet. Currently, FEC mechanisms have been adopted together with Automatic Repeat reQuest (ARQ) mechanism to overcome packet losses and avoid network congestion in various wireless network conditions. The number of FEC packets need to be generated effectively because wireless network usually has varying network conditions. In the current Adaptive FEC mechanism, the FEC packets are decided by the average queue length and average packet retransmission times. The Adaptive FEC mechanisms have been proposed to suit the network condition by generating FEC packets adaptively in the wireless network. However, the current Adaptive FEC mechanism has some major drawbacks such as the reduction of recovery performance which injects too many excessive FEC packets into the network. This is not flexible enough to adapt with varying wireless network condition. Therefore, the enhancement of Adaptive FEC mechanism (AFEC) known as Enhanced Adaptive FEC (EnAFEC) has been proposed. The aim is to improve recovery performance on the current Adaptive FEC mechanism by injecting FEC packets dynamically based on varying wireless network conditions. The EnAFEC mechanism is implemented in the simulation environment using Network Simulator 2 (NS-2). Performance evaluations are also carried out. The EnAFEC was tested with the random uniform error model. The results from experiments and performance analyses showed that EnAFEC mechanism outperformed the other Adaptive FEC mechanism in terms of recovery efficiency. Based on the findings, the optimal amount of FEC generated by EnAFEC mechanism can recover high packet loss and produce good video quality

    DyMo: Dynamic Monitoring of Large Scale LTE-Multicast Systems

    Full text link
    LTE evolved Multimedia Broadcast/Multicast Service (eMBMS) is an attractive solution for video delivery to very large groups in crowded venues. However, deployment and management of eMBMS systems is challenging, due to the lack of realtime feedback from the User Equipment (UEs). Therefore, we present the Dynamic Monitoring (DyMo) system for low-overhead feedback collection. DyMo leverages eMBMS for broadcasting Stochastic Group Instructions to all UEs. These instructions indicate the reporting rates as a function of the observed Quality of Service (QoS). This simple feedback mechanism collects very limited QoS reports from the UEs. The reports are used for network optimization, thereby ensuring high QoS to the UEs. We present the design aspects of DyMo and evaluate its performance analytically and via extensive simulations. Specifically, we show that DyMo infers the optimal eMBMS settings with extremely low overhead, while meeting strict QoS requirements under different UE mobility patterns and presence of network component failures. For instance, DyMo can detect the eMBMS Signal-to-Noise Ratio (SNR) experienced by the 0.1% percentile of the UEs with Root Mean Square Error (RMSE) of 0.05% with only 5 to 10 reports per second regardless of the number of UEs

    Multicast MAC extensions for high rate real-time traffic in wireless LANs

    Get PDF
    Nowadays we are rapidly moving from a mainly textual-based to a multimedia-based Internet, for which the widely deployed IEEE 802.11 wireless LANs can be one of the promising candidates to make them available to users anywhere, anytime, on any device. However, it is still a challenge to support group-oriented real-time multimedia services, such as video-on-demand, video conferencing, distance educations, mobile entertainment services, interactive games, etc., in wireless LANs, as the current protocols do not support multicast, in particular they just send multicast packets in open-loop as broadcast packets, i.e., without any possible acknowledgements or retransmissions. In this thesis, we focus on MAC layer reliable multicast approaches which outperform upper layer ones with both shorter delays and higher efficiencies. Different from polling based approaches, which suffer from long delays, low scalabilities and low efficiencies, we explore a feedback jamming mechanism where negative acknowledgement (NACK) frames are allowed from the non-leader receivers to destroy the acknowledgement (ACK) frame from the single leader receiver and prompts retransmissions from the sender. Based on the feedback jamming scheme, we propose two MAC layer multicast error correction protocols, SEQ driven Leader Based Protocol (SEQ-LBP) and Hybrid Leader Based Protocol (HLBP), the former is an Automatic Repeat reQuest (ARQ) scheme while the later combines both ARQ and the packet level Forward Error Correction (FEC). We evaluate the feedback jamming probabilities and the performances of SEQ-LBP and HLBP based on theoretical analyses, NS-2 simulations and experiments on a real test-bed built with consumer wireless LAN cards. Test results confirm the feasibility of the feedback jamming scheme and the outstanding performances of the proposed protocols SEQ-LBP and HLBP, in particular SEQ-LBP is good for small multicast groups due to its short delay, effectiveness and simplicity while HLBP is better for large multicast groups because of its high efficiency and high scalability with respect to the number of receivers per group.Zurzeit vollzieht sich ein schneller Wechsel vom vorwiegend textbasierten zum multimediabasierten Internet. Die weitverbreiteten IEEE 802.11 Drahtlosnetzwerke sind vielversprechende Kandidaten, um das Internet für Nutzer überall, jederzeit und auf jedem Gerät verfügbar zu machen. Die Unterstützung gruppenorientierter Echtzeit-Dienste in drahtlosen lokalen Netzen ist jedoch immer noch eine Herausforderung. Das liegt daran, dass aktuelle Protokolle keinen Multicast unterstützen. Sie senden Multicast-Pakete vielmehr in einer "Open Loop"-Strategie als Broadcast-Pakete, d. h. ohne jegliche Rückmeldung (feedback) oder Paketwiederholungen. In der vorliegenden Arbeit, anders als in den auf Teilnehmereinzelabfragen (polling) basierenden Ansätzen, die unter langen Verzögerungen, geringer Skalierbarkeit und geringer Effizienz leiden, versuchen wir, Multicast-Feedback bestehend aus positiven (ACK) und negativen Bestätigungen (NACK) auf MAC-Layer im selben Zeitfenster zu bündeln. Die übrigen Empfänger können NACK-Frames senden, um das ACK des Leaders zu zerstören und Paketwiederholungen zu veranlassen. Basierend auf einem Feedback-Jamming Schema schlagen wir zwei MAC-Layer-Protokolle für den Fehlerschutz im Multicast vor: Das SEQ-getriebene Leader Based Protocol (SEQ-LBP) und das Hybrid Leader Based Protocol (HLBP). SEQ-LBP ist eines Automatic Repeat reQuest (ARQ) Schema. HLBP kombiniert ARQ und paketbasierte Forward Error Correction (FEC). Wir evaluieren die Leistungsfähigkeit von ACK/NACK jamming, SEQ-LBP und HLBP durch Analysis, Simulationen in NS-2, sowie Experimenten in einer realen Testumgebung mit handelsüblichen WLAN-Karten. Die Testergebnisse bestätigen die Anwendbarkeit der Feedback-Jamming Schemata und die herausragende Leistungsfähigkeit der vorgestellten Protokolle SEQ-LBP und HLBP. SEQ-LBP ist durch seine kurze Verzögerung, seine Effektivität und seine Einfachheit für kleine Multicast-Gruppen nützlich, während HLBP auf Grund seiner hohen Effizienz und Skalierbarkeit im Bezug auf die Größe der Empfänger eher in großen Multicast-Gruppen anzuwenden ist

    A Prototype Modelling of Ebers for Video Transmission in Wireless Adhoc Network

    Get PDF
    Provisioning of video streaming over ad hoc wireless networks exhibits challenges associated with high packet loss rates and are delay sensitive Excessive packet loss can cause significant degradation in quality of video perceived by users of real-time video applications The recent studies suggest that Forward Error Correction FEC is a good technique for decreasing the negative impact of packet loss on video quality in error control scheme This paper introduces an Estimation based Error Reduction Scheme EBERS to support video communication in ad hoc wireless networks The EBERS considers a frame estimation parameter to support varied bandwidths and attain the delay requirements to support video communication It is also responsible for improvising the QoS offered The EBERS considers layered and embodies distortion limiting features owing to which reduced forward error correction is achieved thus obtaining reduced frame errors transmission errors and retransmission of frames Thereby obtaining high degree of quality of service QoS The comparative study conducted proves the efficiency of the EBERS scheme over the existing mechanism

    SoftCast

    Get PDF
    The focus of this demonstration is the performance of streaming video over the mobile wireless channel. We compare two schemes: the standard approach to video which transmits H.264/AVC-encoded stream over 802.11-like PHY, and SoftCast -- a clean-slate design for wireless video where the source transmits one video stream that each receiver decodes to a video quality commensurate with its specific instantaneous channel quality

    Rate adaptation for wireless video streaming based on error statistics

    Get PDF
    This paper presents a new rate-control algorithm for live video streaming over wireless IP networks, which is based on selective frame discarding. In the proposed mechanism excess 'P' frames are dropped from the output queue at the sender using a congestion estimate based on packet loss statistics obtained from RTCP feedback and from the Data Link (DL) layer. The performance of the algorithm is evaluated through computer simulation. This paper also presents a characterisation of packet losses owing to transmission errors and congestion, which can help in choosing appropriate strategies to maximise the video quality experienced by the end user. Copyright © 2007 Inderscience Enterprises Ltd
    • …
    corecore