Variable Redundancy Coding for Adaptive Error Control

This thesis is concerned with variable redundancy(VR) error control coding. VR coding is proposed as one method of providing efficient adaptive error control for time-varying digital data transmission links. The VR technique involves using a set of short, easy to implement, block codes; rather than the one code of a fixed redundancy system which is usually inefficient, and complex to decode. With a VR system, efficient data-rate low-power codes are used when channel conditions are good, and very high-power inefficient codes are used when the channel is noisy. The decoder decides which code is required to cope with current conditions, and communicates this decision to the encoder by means of a feedback link. This thesis presents a theoretical and practical investigation of the VR technique, and aims to show that when compared with a fixed redundancy system one or more of the advantages of increased average data throughput, decreased maximum probability of erroneous decoding, and decreased complexity can be realised. This is confirmed by the practical results presented in the thesis, which were obtained from field trials of an experimental VR system operating over the HE’ radio channel, and from computer simulations. One consequence of the research has been the inception of a study of codes with disjoint code books and mutual Hamming distance (initially considered for combatting feedback errors), and this topic is introduced in the thesis

Optimum hybrid error correction scheme under strict delay constraints

In packet-based wireless networks, media-based services often require a multicast-enabled transport that guarantees quasi error free transmission under strict delay constraints. Furthermore, both multicast and delay constraints deeply influence the architecture of erasure error recovery (EER). Therefore, we propose a general architecture of EER and study its optimization in this thesis. The architecture integrates overall existing important EER techniques: Automatic Repeat Request, Forward Error Correction and Hybrid ARQ techniques. Each of these EER techniques can be viewed as a special case of Hybrid Error Correction (HEC) schemes. Since the Gilbert-Elliott (GE) erasure error model has been proven to be valid for a wide range of packet based wireless networks, in this thesis, we present the general architecture and its optimization based on the GE channel model. The optimization target is to satisfy a certain target packet loss level under strict delay constraints efficiently. Through the optimization for a given real-time multicast scenario, the total needed redundancy information can be minimized by choosing the best HEC scheme automatically among the entire schemes included in the architecture. As a result, the performance of the optimum HEC scheme can approach the Shannon limit as closely as possible dynamically according to current channel state information.In Paket-basierten drahtlosen Netzwerken benötigen Medien-basierte Dienste oft Multicast-fähigen Transport, der quasi-fehlerfreie Übertragung unter strikten Zeitgrenzen garantiert. Außerdem beeinflussen sowohl Multicast als auch Zeitbegrenzungen stark die Architektur von Auslöschungs-Fehlerschutz (Erasure Error Recovery, EER). Daher stellen wir eine allgemeine Architektur der EER vor und untersuchen ihre Optimierung in dieser Arbeit. Die Architektur integriert alle wichtigen EER-Techniken: Automatic Repeat Request, Forward Error Correction und Hybrid ARQ. Jede dieser EER-Techniken kann als Spezialfall der Hybrid Error Correction (HEC) angesehen werden. Da das Gilbert-Elliot (GE) Auslöschungs-Fehler-Modell für einen weiten Bereich von Paket-basierten drahtlosen Netzwerken als gültig erwiesen wurde, präsentieren wir in dieser Arbeit die allgemeine Architektur und deren Optimierung basierend auf dem GE Kanalmodell. Zweck der Optimierung ist es, eine gewisse Ziel-Paketfehlerrate unter strikten Zeitgrenzen effizient zu erreichen. Durch die Optimierung für ein gegebenes Echtzeit-Mutlicast-Szenario kann die insgesamt benötigte Redundanz-Information minimiert werden. Dies erfolgt durch automatische Auswahl des optimalen HEC Schemas unter all den Schemata, die in die Architektur integriert sind. Das optimale HEC-Schema kann die Shannon Grenze so nahe wie möglich, dynamisch, entsprechend dem derzeitigen Kanalzustand, erreichen

The deep space network, volume 9

Progress on DSN supporting research and technology is reported. Topics discussed include: descriptions of the objectives, functions, organization, facilities, and communication; Pioneer support; and advanced engineering

Embedded coding algorithms applicable to time variable channels

This thesis investigates new design and implementation techniques applicable to modern communication systems operating over time variable channels. Three areas of interest are investigated. These include, source coding in conjunction with real-time channel evaluation, channel coding and modem design. An investigation of source coding methods has led to the development of a new embedded real time channel evaluation, based on statistical techniques. The performance of this technique is examined using simulation techniques for channels with and without memory. Existing channel coding schemes applicable to time variable channels have been examined. This led to the formulation of a new coding technique, termed embedded encoding. Two implementations of such codes, embedded array codes and embedded convolutional codes, were developed. The theoretical and practical performance of these codes has been investigated. The final area of investigation has been the development of a 4-tone multi-frequency shift keying modem. In keeping with the intention of totally digital system design, the demodulator has been im­plemented on a single digital signal processing card. The demodulation method developed employs an embedded synchronisation technique, termed Code-Assisted Bit Synchronisation. The demodulator performs symbol synchronisation by utilising the convolutional code used for the purpose of channel coding. It thus performs the combined functions of the demodulator, decoder and symbol timing recovery, which are normally found as separate sub­systems. In combining these subsystems a more efficient modem has been developed

Time diversity solutions to cope with lost packets

A dissertation submitted to Departamento de Engenharia Electrotécnica of Faculdade de Ciências e Tecnologia of Universidade Nova de Lisboa in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Engenharia Electrotécnica e de ComputadoresModern broadband wireless systems require high throughputs and can also have very high Quality-of-Service (QoS) requirements, namely small error rates and short delays. A high spectral efficiency is needed to meet these requirements. Lost packets, either due to errors or collisions, are usually discarded and need to be retransmitted, leading to performance degradation. An alternative to simple retransmission that can improve both power and spectral efficiency is to combine the signals associated to different transmission attempts. This thesis analyses two time diversity approaches to cope with lost packets that are relatively similar at physical layer but handle different packet loss causes. The first is a lowcomplexity Diversity-Combining (DC) Automatic Repeat reQuest (ARQ) scheme employed in a Time Division Multiple Access (TDMA) architecture, adapted for channels dedicated to a single user. The second is a Network-assisted Diversity Multiple Access (NDMA) scheme, which is a multi-packet detection approach able to separate multiple mobile terminals transmitting simultaneously in one slot using temporal diversity. This thesis combines these techniques with Single Carrier with Frequency Division Equalizer (SC-FDE) systems, which are widely recognized as the best candidates for the uplink of future broadband wireless systems. It proposes a new NDMA scheme capable of handling more Mobile Terminals (MTs) than the user separation capacity of the receiver. This thesis also proposes a set of analytical tools that can be used to analyse and optimize the use of these two systems. These tools are then employed to compare both approaches in terms of error rate, throughput and delay performances, and taking the implementation complexity into consideration. Finally, it is shown that both approaches represent viable solutions for future broadband wireless communications complementing each other.Fundação para a Ciência e Tecnologia - PhD grant(SFRH/BD/41515/2007); CTS multi-annual funding project PEst-OE/EEI/UI0066/2011, IT pluri-annual funding project PEst-OE/EEI/LA0008/2011, U-BOAT project PTDC/EEATEL/ 67066/2006, MPSat project PTDC/EEA-TEL/099074/2008 and OPPORTUNISTICCR project PTDC/EEA-TEL/115981/200

Space Communications: Theory and Applications. Volume 3: Information Processing and Advanced Techniques. A Bibliography, 1958 - 1963

Annotated bibliography on information processing and advanced communication techniques - theory and applications of space communication

Channel Access in Wireless Networks: Protocol Design of Energy-Aware Schemes for the IoT and Analysis of Existing Technologies

The design of channel access policies has been an object of study since the deployment of the first wireless networks, as the Medium Access Control (MAC) layer is responsible for coordinating transmissions to a shared channel and plays a key role in the network performance. While the original target was the system throughput, over the years the focus switched to communication latency, Quality of Service (QoS) guarantees, energy consumption, spectrum efficiency, and any combination of such goals. The basic mechanisms to use a shared channel, such as ALOHA, TDMA- and FDMA-based policies, have been introduced decades ago. Nonetheless, the continuous evolution of wireless networks and the emergence of new communication paradigms demand the development of new strategies to adapt and optimize the standard approaches so as to satisfy the requirements of applications and devices. This thesis proposes several channel access schemes for novel wireless technologies, in particular Internet of Things (IoT) networks, the Long-Term Evolution (LTE) cellular standard, and mmWave communication with the IEEE802.11ad standard. The first part of the thesis concerns energy-aware channel access policies for IoT networks, which typically include several battery-powered sensors. In scenarios with energy restrictions, traditional protocols that do not consider the energy consumption may lead to the premature death of the network and unreliable performance expectations. The proposed schemes show the importance of accurately characterizing all the sources of energy consumption (and inflow, in the case of energy harvesting), which need to be included in the protocol design. In particular, the schemes presented in this thesis exploit data processing and compression techniques to trade off QoS for lifetime. We investigate contention-free and contention-based chanel access policies for different scenarios and application requirements. While the energy-aware schemes proposed for IoT networks are based on a clean-slate approach that is agnostic of the communication technology used, the second part of the thesis is focused on the LTE and IEEE802.11ad standards. As regards LTE, the study proposed in this thesis shows how to use machine-learning techniques to infer the collision multiplicity in the channel access phase, information that can be used to understand when the network is congested and improve the contention resolution mechanism. This is especially useful for massive access scenarios; in the last years, in fact, the research community has been investigating on the use of LTE for Machine-Type Communication (MTC). As regards the standard IEEE802.11ad, instead, it provides a hybrid MAC layer with contention-based and contention-free scheduled allocations, and a dynamic channel time allocation mechanism built on top of such schedule. Although this hybrid scheme is expected to meet heterogeneous requirements, it is still not clear how to develop a schedule based on the various traffic flows and their demands. A mathematical model is necessary to understand the performance and limits of the possible types of allocations and guide the scheduling process. In this thesis, we propose a model for the contention-based access periods which is aware of the interleaving of the available channel time with contention-free allocations

The Telecommunications and Data Acquisition Report

Developments in space communications, radio navigation, radio science, ground-base radio astronomy, reports on the Deep Space Network (DSN) and its Ground Communications Facility (GCF), and applications of radio interferometry at microwave frequencies are discussed

NASA Tech Briefs, Fall 1976

Topics include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; New Product Ideas: A summary of seloc.ted Innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences