Construction of a real vehicular delay-tolerant network testbed

Vehicular Delay-Tolerant Networks (VDTNs) appear as innovative network architecture, able to outline communication challenges caused by issues like variable delays, disruption and intermittent connectivity once that it utilizes the store-carry-and-forward method to allow that in-transit messages (called bundles) can be delivered to the destination by hopping over the mobile vehicles even that an end-to-end path does not exist. Since messages are stored persistently in a buffer and forward to the next hop, a new communication infrastructure is created allowing low-cost asynchronous opportunistic communication under the most critical situations like variable delays and bandwidth constraints. VDTN introduces a layered architecture, acting as an overlay network over the link layer, aggregating incoming IP packets in data bundles (large IP packets), using out-of-band signaling, based on the separation of the control plane and planes. This dissertation presents and evaluates the performance of a real VDTN testbed, demonstrating the real applicability of this new vehicular communication approach. It includes an embedded VDTN testbed created to evaluate safety systems in a real-world scenario. It was used cars with laptops to realize terminal and relay nodes. A real testbed is very important because some complex issues presented in vehicular communication systems can be treated with more realism in real-world environments than in a laboratory environment. The experiments were performed on the internal streets of Brazilian Fiat Automobile manufacturing plant. Performance measurements and analysis were also conduct to verify the efficiency of the system. The results obtained show that safety applications and services can be executed with the actual proposal VDTN architecture in several environments, although notable interference as fading and characteristics of the radio channel, require the use of more modern, appropriate and robust technologies. Thus, the real deployment of VDTNs confirms that VDTNs can be seen as a very promising technology for vehicular communications.Fundação para a Ciência e a Tecnologia (FCT

Connectivity and Data Transmission over Wireless Mobile Systems

We live in a world where wireless connectivity is pervasive and becomes ubiquitous. Numerous devices with varying capabilities and multiple interfaces are surrounding us. Most home users use Wi-Fi routers, whereas a large portion of human inhabited land is covered by cellular networks. As the number of these devices, and the services they provide, increase, our needs in bandwidth and interoperability are also augmented. Although deploying additional infrastructure and future protocols may alleviate these problems, efficient use of the available resources is important. We are interested in the problem of identifying the properties of a system able to operate using multiple interfaces, take advantage of user locations, identify the users that should be involved in the routing, and setup a mechanism for information dissemination. The challenges we need to overcome arise from network complexity and heterogeneousness, as well as the fact that they have no single owner or manager. In this thesis I focus on two cases, namely that of utilizing "in-situ" WiFi Access Points to enhance the connections of mobile users, and that of establishing "Virtual Access Points" in locations where there is no fixed roadside equipment available. Both environments have attracted interest for numerous related works. In the first case the main effort is to take advantage of the available bandwidth, while in the second to provide delay tolerant connectivity, possibly in the face of disasters. Our main contribution is to utilize a database to store user locations in the system, and to provide ways to use that information to improve system effectiveness. This feature allows our system to remain effective in specific scenarios and tests, where other approaches fail

From MANET to people-centric networking: Milestones and open research challenges

In this paper, we discuss the state of the art of (mobile) multi-hop ad hoc networking with the aim to present the current status of the research activities and identify the consolidated research areas, with limited research opportunities, and the hot and emerging research areas for which further research is required. We start by briefly discussing the MANET paradigm, and why the research on MANET protocols is now a cold research topic. Then we analyze the active research areas. Specifically, after discussing the wireless-network technologies, we analyze four successful ad hoc networking paradigms, mesh networks, opportunistic networks, vehicular networks, and sensor networks that emerged from the MANET world. We also present an emerging research direction in the multi-hop ad hoc networking field: people centric networking, triggered by the increasing penetration of the smartphones in everyday life, which is generating a people-centric revolution in computing and communications

Mobile Ad-Hoc Networks

Being infrastructure-less and without central administration control, wireless ad-hoc networking is playing a more and more important role in extending the coverage of traditional wireless infrastructure (cellular networks, wireless LAN, etc). This book includes state-of-the-art techniques and solutions for wireless ad-hoc networks. It focuses on the following topics in ad-hoc networks: quality-of-service and video communication, routing protocol and cross-layer design. A few interesting problems about security and delay-tolerant networks are also discussed. This book is targeted to provide network engineers and researchers with design guidelines for large scale wireless ad hoc networks

Delay Tolerant Networks for Efficient Information Harvesting and Distribution in Intelligent Transportation Systems

[EN] Intelligent Transportation Systems (ITS) can make transportation safer, more efficient, and more sustainable by applying various information and communication technologies. One of these technologies are \acfp{VN}. \acp{VN} combine different communication solutions such as cellular networks, \acfp{VANET}, or IEEE 802.11 technologies to provide connectivity among vehicles, and between vehicles and road infrastructure. This thesis focuses on VNs, and considers that the high speed of the nodes and the presence of obstacles like buildings, produces a highly variable network topology, as well as more frequent partitions in the network. Therefore, classical \ac{MANET} protocols do not adapt well to VANETs. Under these conditions, \ac{DTN} have been proposed as an alternative able to cope with these adverse characteristics. In DTN, when a message cannot be routed to its destination, it is not immediately dropped but it is instead stored and carried until a new route becomes available. The combination of VN and DTN is called \acp{VDTN}. In this thesis, we propose a new VDTN protocol designed to collect information from vehicular sensors. Our proposal, called \ac{MSDP}, combines information about the localization obtained from a GNSS system with the actual street/road layout obtained from a Navigation System (NS) to define a new routing metric. Both analytical and simulation results prove that MSDP outperforms previous proposals. Concerning the deployment of VNs and VANET technologies, technology already left behind the innovation and the standardization phases, and it is about time it reach the first early adopters in the market. However, most car manufacturers have decided to implement VN devices in the form of On Board Units (OBUs), which are expensive, heavily manufacturer dependent, and difficult to upgrade. These facts are delaying the deployment of VN. To boost this process, we have developed the GRCBox architecture. This architecture is based on low-cost devices and enables the establishment of V2X, \emph{i.e.} V2I and V2V, communications while integrating users by easing the use of general purpose devices like smartphones, tablets or laptops. To demonstrate the viability of the GRCBox architecture, we combined it with a DTN platform called Scampi to obtain actual results over a real VDTN scenario. We also present several GRCBox-aware applications that illustrate how developers can create applications that bring the potential of VN to user devices.[ES] Los sistemas de transporte inteligente (ITS) son el soporte para el establecimiento de un transporte más seguro, más eficiente y más sostenible mediante el uso de tecnologías de la información y las comunicaciones. Una de estas tecnologías son las redes vehiculares (VNs). Las VNs combinan diferentes tecnologías de comunicación como las redes celulares, las redes ad-hoc vehiculares (VANETs) o las redes 802.11p para proporcionar conectividad entre vehículos, y entre vehículos y la infraestructura de carreteras. Esta tesis se centra en las VNs, en las cuales la alta velocidad de los nodos y la presencia de obstáculos como edificios producen una topología de red altamente variable, así como frecuentes particiones en la red. Debido a estas características, los protocolos para redes móviles ad-hoc (MANETs) no se adaptan bien a las VANETs. En estas condiciones, las redes tolerantes a retardos (DTNs) se han propuesto como una alternativa capaz de hacer frente a estos problemas. En DTN, cuando un mensaje no puede ser encaminado hacia su destino, no es inmediatamente descartado sino es almacenado hasta que una nueva ruta esta disponible. Cuando las VNs y las DTNs se combinan surgen las redes vehiculares tolerantes a retardos (VDTN). En esta tesis proponemos un nuevo protocolo para VDTNs diseñado para recolectar la información generada por sensores vehiculares. Nuestra propuesta, llamada MSDP, combina la información obtenida del servicio de información geográfica (GIS) con el mapa real de las calles obtenido del sistema de navegación (NS) para definir una nueva métrica de encaminamiento. Resultados analíticos y mediante simulaciones prueban que MSDP mejora el rendimiento de propuestas anteriores. En relación con el despliegue de las VNs y las tecnologías VANET, la tecnología ha dejado atrás las fases de innovación y estandarización, ahora es el momento de alcanzar a los primeros usuarios del mercado. Sin embargo, la mayoría de fabricantes han decidido implementar los dispositivos para VN como unidades de a bordo (OBU), las cuales son caras y difíciles de actualizar. Además, las OBUs son muy dependientes del fabricante original. Todo esto esta retrasando el despliegue de las VNs. Para acelerar la adopción de las VNs, hemos desarrollado la arquitectura GRCBox. La arquitectura GRCBox esta basada en un dispositivo de bajo coste que permite a los usuarios usar comunicaciones V2X (V2V y V2I) mientras utilizan dispositivos de propósito general como teléfonos inteligentes, tabletas o portátiles. Las pruebas incluidas en esta tesis demuestran la viabilidad de la arquitectura GRCBox. Mediante la combinación de nuestra GRCBox y una plataforma de DTN llamada Scampi hemos diseñado y probado un escenario VDTN real. También presentamos como los desarrolladores pueden crear nuevas aplicaciones GRCBox para llevar el potencial de las VN a los dispositivos de usuario.[CA] Els sistemes de transport intel·ligent (ITS) poden crear un transport més segur, més eficient i més sostenible mitjançant l'ús de tecnologies de la informació i les comunicacions aplicades al transport. Una d'aquestes tecnologies són les xarxes vehiculars (VN). Les VN combinen diferents tecnologies de comunicació, com ara les xarxes cel·lulars, les xarxes ad-hoc vehiculars (VANET) o les xarxes 802.11p, per a proporcionar comunicació entre vehicles, i entre vehicles i la infraestructura de carreteres. Aquesta tesi se centra en les VANET, en les quals l'alta velocitat dels nodes i la presència d'obstacles, com els edificis, produeixen una topologia de xarxa altament variable, i també freqüents particions en la xarxa. Per aquest motiu, els protocols per a xarxes mòbils ad-hoc (MANET) no s'adapten bé. En aquestes condicions, les xarxes tolerants a retards (DTN) s'han proposat com una alternativa capaç de fer front a aquests problemes. En DTN, quan un missatge no pot ser encaminat cap a la seua destinació, no és immediatament descartat sinó que és emmagatzemat fins que apareix una ruta nova. Quan les VN i les DTN es combinen sorgeixen les xarxes vehicular tolerants a retards (VDTN). En aquesta tesi proposem un nou protocol per a VDTN dissenyat per a recol·lectar la informació generada per sensors vehiculars. La nostra proposta, anomenada MSDP, combina la informació obtinguda del servei d'informació geogràfica (GIS) amb el mapa real dels carrers obtingut del sistema de navegació (NS) per a definir una nova mètrica d'encaminament. Resultats analítics i mitjançant simulacions proven que MSDP millora el rendiment de propostes prèvies. En relació amb el desplegament de les VN i les tecnologies VANET, la tecnologia ha deixat arrere les fases d'innovació i estandardització, ara és temps d'aconseguir als primers usuaris del mercat. No obstant això, la majoria de fabricants han decidit implementar els dispositius per a VN com a unitats de bord (OBU), les quals són cares i difícils d'actualitzar. A més, les OBU són molt dependents del fabricant original. Tot això està retardant el desplegament de les VN. Per a accelerar l'adopció de les VN, hem desenvolupat l'arquitectura GRCBox. L'arquitectura GRCBox està basada en un dispositiu de baix cost que permet als usuaris usar comunicacions V2V mentre usen dispositius de propòsit general, com ara telèfons intel·ligents, tauletes o portàtils. Les proves incloses en aquesta tesi demostren la viabilitat de l'arquitectura GRCBox. Mitjançant la combinació de la nostra GRCBox i la plataforma de DTN Scampi, hem dissenyat i provat un escenari VDTN pràctic. També presentem com els desenvolupadors poden crear noves aplicacions GRCBox per a portar el potencial de les VN als dispositius d'usuari.Martínez Tornell, S. (2016). Delay Tolerant Networks for Efficient Information Harvesting and Distribution in Intelligent Transportation Systems [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/68486TESI

A survey of flooding, gossip routing, and related schemes for wireless multi- hop networks

Flooding is an essential and critical service in computer networks that is used by many routing protocols to send packets from a source to all nodes in the network. As the packets are forwarded once by each receiving node, many copies of the same packet traverse the network which leads to high redundancy and unnecessary usage of the sparse capacity of the transmission medium. Gossip routing is a well-known approach to improve the flooding in wireless multi-hop networks. Each node has a forwarding probability p that is either statically per-configured or determined by information that is available at runtime, e.g, the node degree. When a packet is received, the node selects a random number r. If the number r is below p, the packet is forwarded and otherwise, in the most simple gossip routing protocol, dropped. With this approach the redundancy can be reduced while at the same time the reachability is preserved if the value of the parameter p (and others) is chosen with consideration of the network topology. This technical report gives an overview of the relevant publications in the research domain of gossip routing and gives an insight in the improvements that can be achieved. We discuss the simulation setups and results of gossip routing protocols as well as further improved flooding schemes. The three most important metrics in this application domain are elaborated: reachability, redundancy, and management overhead. The published studies used simulation environments for their research and thus the assumptions, models, and parameters of the simulations are discussed and the feasibility of an application for real world wireless networks are highlighted. Wireless mesh networks based on IEEE 802.11 are the focus of this survey but publications about other network types and technologies are also included. As percolation theory, epidemiological models, and delay tolerant networks are often referred as foundation, inspiration, or application of gossip routing in wireless networks, a brief introduction to each research domain is included and the applicability of the particular models for the gossip routing is discussed

A DIVERSE BAND-AWARE DYNAMIC SPECTRUM ACCESS ARCHITECTURE FOR CONNECTIVITY IN RURAL COMMUNITIES

Ubiquitous connectivity plays an important role in improving the quality of life in terms of economic development, health and well being, social justice and equity, as well as in providing new educational opportunities. However, rural communities which account for 46% of the world\u27s population lacks access to proper connectivity to avail such societal benefits, creating a huge digital divide between the urban and rural areas. A primary reason is that the Information and Communication Technologies (ICT) providers have less incentives to invest in rural areas due to lack of promising revenue returns. Existing research and industrial attempts in providing connectivity to rural communities suffer from severe drawbacks, such as expensive wireless spectrum licenses and infrastructures, under- and over-provisioning of spectrum resources while handling heterogeneous traffic, lack of novel wireless technologies tailored to the unique challenges and requirements of rural communities (e.g., agricultural fields). Leveraging the recent advances in Dynamic Spectrum Access (DSA) technologies like wide band spectrum analyzers and spectrum access systems, and multi-radio access technologies (multi-RAT), this dissertation proposes a novel Diverse Band-aware DSA (d-DSA) network architecture, that addresses the drawbacks of existing standard and DSA wireless solutions, and extends ubiquitous connectivity to rural communities; a step forward in the direction of the societal and economic improvements in rural communities, and hence, narrowing the digital divide between the rural and urban societies. According to this paradigm, a certain wireless device is equipped with software defined radios (SDRs) that are capable of accessing multiple (un)licensed spectrum bands, such as, TV, LTE, GSM, CBRS, ISM, and possibly futuristic mmWaves. In order to fully exploit the potential of the d-DSA paradigm, while meeting heterogeneous traffic demands that may be generated in rural communities, we design efficient routing strategies and optimization techniques, which are based on a variety of tools such as graph modeling, integer linear programming, dynamic programming, and heuristic design. Our results on realistic traces in a large variety of rural scenarios show that the proposed techniques are able to meet the heterogeneous traffic requirements of rural applications, while ensuring energy efficiency and robustness of the architecture for providing connectivity to rural communities

Data Gathering and Dissemination over Flying Ad-hoc Networks in Smart Environments

The advent of the Internet of Things (IoT) has laid the foundations for new possibilities in our life. The ability to communicate with any electronic device has become a fascinating opportunity. Particularly interesting are UAVs (Unmanned Airborne Vehicles), autonomous or remotely controlled flying devices able to operate in many contexts thanks to their mobility, sensors, and communication capabilities. Recently, the use of UAVs has become an important asset in many critical and common scenarios; thereby, various research groups have started to consider UAVs’ potentiality applied on smart environments. UAVs can communicate with each other forming a Flying Ad-hoc Network (FANET), in order to provide complex services that requires the coordination of several UAVs; yet, this also generates challenging communication issues. This dissertation starts from this standpoint, firstly focusing on networking issues and potential solutions already present in the state-of-the-art. To this aim, the peculiar issues of routing in mobile, 3D shaped ad-hoc networks have been investigated through a set of simulations to compare different ad-hoc routing protocols and understand their limits. From this knowledge, our work takes into consideration the differences between classic MANETs and FANETs, highlighting the specific communication performance of UAVs and their specific mobility models. Based on these assumptions, we propose refinements and improvements of routing protocols, as well as their linkage with actual UAV-based applications to support smart services. Particular consideration is devoted to Delay/Disruption Tolerant Networks (DTNs), characterized by long packet delays and intermittent connectivity, a critical aspect when UAVs are involved. The goal is to leverage on context-aware strategies in order to design more efficient routing solutions. The outcome of this work includes the design and analysis of new routing protocols supporting efficient UAVs’ communication with heterogeneous smart objects in smart environments. Finally, we discuss about how the presence of UAV swarms may affect the perception of population, providing a critical analysis of how the consideration of these aspects could change a FANET communication infrastructure

Reliable Data Transmission in Challenging Vehicular Network using Delay Tolerant Network

In the 21st century, there has been an increasing tendency toward the wide adoption of wireless networks and technologies due to their significant advantages such as flexibility, mobility, accessibility, and low cost. Wireless technologies have therefore become essential factors in the improvement of intra-vehicle road safety in Vehicular Ad-hoc Network (VANET), which potentially reduce road traffic accidents by enabling efficient exchange of information between vehicles in the early stages. However, due to the inherent high mobility and rapid change of topology, there are numerous challenges in VANET. Hence, different software packages have been combined in this project to create the VANET environment, whereby the Objective Modular Network Testbed (OMNeT++) and the Simulation of Urban Mobility (SUMO), along with Vehicles in Network Simulation (VEINS) are integrated to model the VANET environment. Also, Delay Tolerant Network (DTN) are implemented in the Opportunistic Network Environment (ONE) simulator, where the Store-Carry-Forward technique is used to route traffic. When network resources are not limited, a high delivery ratio is possible. However, when network resources are scarce, these protocols will have a low delivery ratio and high overhead. Due to these limitations, in this research, an extensive performance evaluation of various routing protocols for DTN with different buffer management policies, giving insight into the impact of these policies on DTN routing protocol performance has been conducted. The empirical study gave insight into the strengths and limitations of the existing protocols thus enabling the selection of the benchmark protocols utilized in evaluating a new Enhanced Message Replication Technique (EMRT) proposed in this thesis. The main contribution of this thesis is the design, implementation, and evaluation of a novel EMRT that dynamically adjusts the number of message replicas based on a node's ability to quickly disseminate the message and maximize the delivery ratio. EMRT is evaluated using three different quota protocols: Spray&Wait, Encounter Based Routing (EBR), and Destination Based Routing Protocol (DBRP). Simulation results show that applying EMRT to these protocols improves the delivery ratio while reducing overhead ratio and latency average. For example, when combined with Spray&Wait, EBR, and DBRP, the delivery probability is improved by 13%, 8%, and 10%, respectively, while the latency average is reduced by 51%, 14%, and 13%, respectively