5,693 research outputs found
Self-Synchronization in Duty-cycled Internet of Things (IoT) Applications
In recent years, the networks of low-power devices have gained popularity.
Typically these devices are wireless and interact to form large networks such
as the Machine to Machine (M2M) networks, Internet of Things (IoT), Wearable
Computing, and Wireless Sensor Networks. The collaboration among these devices
is a key to achieving the full potential of these networks. A major problem in
this field is to guarantee robust communication between elements while keeping
the whole network energy efficient. In this paper, we introduce an extended and
improved emergent broadcast slot (EBS) scheme, which facilitates collaboration
for robust communication and is energy efficient. In the EBS, nodes
communication unit remains in sleeping mode and are awake just to communicate.
The EBS scheme is fully decentralized, that is, nodes coordinate their wake-up
window in partially overlapped manner within each duty-cycle to avoid message
collisions. We show the theoretical convergence behavior of the scheme, which
is confirmed through real test-bed experimentation.Comment: 12 Pages, 11 Figures, Journa
RTXP : A Localized Real-Time Mac-Routing Protocol for Wireless Sensor Networks
Protocols developed during the last years for Wireless Sensor Networks (WSNs)
are mainly focused on energy efficiency and autonomous mechanisms (e.g.
self-organization, self-configuration, etc). Nevertheless, with new WSN
applications, appear new QoS requirements such as time constraints. Real-time
applications require the packets to be delivered before a known time bound
which depends on the application requirements. We particularly focus on
applications which consist in alarms sent to the sink node. We propose
Real-Time X-layer Protocol (RTXP), a real-time communication protocol. To the
best of our knowledge, RTXP is the first MAC and routing real-time
communication protocol that is not centralized, but instead relies only on
local information. The solution is cross-layer (X-layer) because it allows to
control the delays due to MAC and Routing layers interactions. RTXP uses a
suited hop-count-based Virtual Coordinate System which allows deterministic
medium access and forwarder selection. In this paper we describe the protocol
mechanisms. We give theoretical bound on the end-to-end delay and the capacity
of the protocol. Intensive simulation results confirm the theoretical
predictions and allow to compare with a real-time centralized solution. RTXP is
also simulated under harsh radio channel, in this case the radio link
introduces probabilistic behavior. Nevertheless, we show that RTXP it performs
better than a non-deterministic solution. It thus advocates for the usefulness
of designing real-time (deterministic) protocols even for highly unreliable
networks such as WSNs
Adaptive Synchronization of Robotic Sensor Networks
The main focus of recent time synchronization research is developing
power-efficient synchronization methods that meet pre-defined accuracy
requirements. However, an aspect that has been often overlooked is the high
dynamics of the network topology due to the mobility of the nodes. Employing
existing flooding-based and peer-to-peer synchronization methods, are networked
robots still be able to adapt themselves and self-adjust their logical clocks
under mobile network dynamics? In this paper, we present the application and
the evaluation of the existing synchronization methods on robotic sensor
networks. We show through simulations that Adaptive Value Tracking
synchronization is robust and efficient under mobility. Hence, deducing the
time synchronization problem in robotic sensor networks into a dynamic value
searching problem is preferable to existing synchronization methods in the
literature.Comment: First International Workshop on Robotic Sensor Networks part of
Cyber-Physical Systems Week, Berlin, Germany, 14 April 201
A critical analysis of research potential, challenges and future directives in industrial wireless sensor networks
In recent years, Industrial Wireless Sensor Networks (IWSNs) have emerged as an important research theme with applications spanning a wide range of industries including automation, monitoring, process control, feedback systems and automotive. Wide scope of IWSNs applications ranging from small production units, large oil and gas industries to nuclear fission control, enables a fast-paced research in this field. Though IWSNs offer advantages of low cost, flexibility, scalability, self-healing, easy deployment and reformation, yet they pose certain limitations on available potential and introduce challenges on multiple fronts due to their susceptibility to highly complex and uncertain industrial environments. In this paper a detailed discussion on design objectives, challenges and solutions, for IWSNs, are presented. A careful evaluation of industrial systems, deadlines and possible hazards in industrial atmosphere are discussed. The paper also presents a thorough review of the existing standards and industrial protocols and gives a critical evaluation of potential of these standards and protocols along with a detailed discussion on available hardware platforms, specific industrial energy harvesting techniques and their capabilities. The paper lists main service providers for IWSNs solutions and gives insight of future trends and research gaps in the field of IWSNs
Fast Desynchronization For Decentralized Multichannel Medium Access Control
Distributed desynchronization algorithms are key to wireless sensor networks
as they allow for medium access control in a decentralized manner. In this
paper, we view desynchronization primitives as iterative methods that solve
optimization problems. In particular, by formalizing a well established
desynchronization algorithm as a gradient descent method, we establish novel
upper bounds on the number of iterations required to reach convergence.
Moreover, by using Nesterov's accelerated gradient method, we propose a novel
desynchronization primitive that provides for faster convergence to the steady
state. Importantly, we propose a novel algorithm that leads to decentralized
time-synchronous multichannel TDMA coordination by formulating this task as an
optimization problem. Our simulations and experiments on a densely-connected
IEEE 802.15.4-based wireless sensor network demonstrate that our scheme
provides for faster convergence to the steady state, robustness to hidden
nodes, higher network throughput and comparable power dissipation with respect
to the recently standardized IEEE 802.15.4e-2012 time-synchronized channel
hopping (TSCH) scheme.Comment: to appear in IEEE Transactions on Communication
Let the Tree Bloom: Scalable Opportunistic Routing with ORPL
Routing in battery-operated wireless networks is challenging, posing a tradeoff between energy and latency. Previous work has shown that opportunistic routing can achieve low-latency data collection in duty-cycled networks. However, applications are now considered where nodes are not only periodic data sources, but rather addressable end points generating traffic with arbitrary patterns.
We present ORPL, an opportunistic routing protocol that supports any-to-any, on-demand traffic. ORPL builds upon RPL, the standard protocol for low-power IPv6 networks. By combining RPL's tree-like topology with opportunistic routing, ORPL forwards data to any destination based on the mere knowledge of the nodes' sub-tree. We use bitmaps and Bloom filters to represent and propagate this information in a space-efficient way, making ORPL scale to large networks of addressable nodes. Our results in a 135-node testbed show that ORPL outperforms a number of state-of-the-art solutions including RPL and CTP, conciliating a sub-second latency and a sub-percent duty cycle. ORPL also increases robustness and scalability, addressing the whole network reliably through a 64-byte Bloom filter, where RPL needs kilobytes of routing tables for the same task
- …