Cache Equalizer: A Cache Pressure Aware Block Placement Scheme for Large-Scale Chip Multiprocessors

This paper describes Cache Equalizer (CE), a novel distributed cache management scheme for large scale chip multiprocessors (CMPs). Our work is motivated by large asymmetry in cache sets usages. CE decouples the physical locations of cache blocks from their addresses for the sake of reducing misses caused by destructive interferences. Temporal pressure at the on-chip last-level cache, is continuously collected at a group (comprised of cache sets) granularity, and periodically recorded at the memory controller to guide the placement process. An incoming block is consequently placed at a cache group that exhibits the minimum pressure. CE provides Quality of Service (QoS) by robustly offering better performance than the baseline shared NUCA cache. Simulation results using a full-system simulator demonstrate that CE outperforms shared NUCA caches by an average of 15.5% and by as much as 28.5% for the benchmark programs we examined. Furthermore, evaluations manifested the outperformance of CE versus related CMP cache designs

Scalability of broadcast performance in wireless network-on-chip

Networks-on-Chip (NoCs) are currently the paradigm of choice to interconnect the cores of a chip multiprocessor. However, conventional NoCs may not suffice to fulfill the on-chip communication requirements of processors with hundreds or thousands of cores. The main reason is that the performance of such networks drops as the number of cores grows, especially in the presence of multicast and broadcast traffic. This not only limits the scalability of current multiprocessor architectures, but also sets a performance wall that prevents the development of architectures that generate moderate-to-high levels of multicast. In this paper, a Wireless Network-on-Chip (WNoC) where all cores share a single broadband channel is presented. Such design is conceived to provide low latency and ordered delivery for multicast/broadcast traffic, in an attempt to complement a wireline NoC that will transport the rest of communication flows. To assess the feasibility of this approach, the network performance of WNoC is analyzed as a function of the system size and the channel capacity, and then compared to that of wireline NoCs with embedded multicast support. Based on this evaluation, preliminary results on the potential performance of the proposed hybrid scheme are provided, together with guidelines for the design of MAC protocols for WNoC.Peer ReviewedPostprint (published version

Adaptive memory hierarchies for next generation tiled microarchitectures

Les últimes dècades el rendiment dels processadors i de les memòries ha millorat a diferent ritme, limitant el rendiment dels processadors i creant el conegut memory gap. Sol·lucionar aquesta diferència de rendiment és un camp d'investigació d'actualitat i que requereix de noves sol·lucions. Una sol·lució a aquest problema són les memòries “cache”, que permeten reduïr l'impacte d'unes latències de memòria creixents i que conformen la jerarquia de memòria. La majoria de d'organitzacions de les “caches” estan dissenyades per a uniprocessadors o multiprcessadors tradicionals. Avui en dia, però, el creixent nombre de transistors disponible per xip ha permès l'aparició de xips multiprocessador (CMPs). Aquests xips tenen diferents propietats i limitacions i per tant requereixen de jerarquies de memòria específiques per tal de gestionar eficientment els recursos disponibles. En aquesta tesi ens hem centrat en millorar el rendiment i la eficiència energètica de la jerarquia de memòria per CMPs, des de les “caches” fins als controladors de memòria. A la primera part d'aquesta tesi, s'han estudiat organitzacions tradicionals per les “caches” com les privades o compartides i s'ha pogut constatar que, tot i que funcionen bé per a algunes aplicacions, un sistema que s'ajustés dinàmicament seria més eficient. Tècniques com el Cooperative Caching (CC) combinen els avantatges de les dues tècniques però requereixen un mecanisme centralitzat de coherència que té un consum energètic molt elevat. És per això que en aquesta tesi es proposa el Distributed Cooperative Caching (DCC), un mecanisme que proporciona coherència en CMPs i aplica el concepte del cooperative caching de forma distribuïda. Mitjançant l'ús de directoris distribuïts s'obté una sol·lució més escalable i que, a més, disposa d'un mecanisme de marcatge més flexible i eficient energèticament. A la segona part, es demostra que les aplicacions fan diferents usos de la “cache” i que si es realitza una distribució de recursos eficient es poden aprofitar els que estan infrautilitzats. Es proposa l'Elastic Cooperative Caching (ElasticCC), una organització capaç de redistribuïr la memòria “cache” dinàmicament segons els requeriments de cada aplicació. Una de les contribucions més importants d'aquesta tècnica és que la reconfiguració es decideix completament a través del maquinari i que tots els mecanismes utilitzats es basen en estructures distribuïdes, permetent una millor escalabilitat. ElasticCC no només és capaç de reparticionar les “caches” segons els requeriments de cada aplicació, sinó que, a més a més, és capaç d'adaptar-se a les diferents fases d'execució de cada una d'elles. La nostra avaluació també demostra que la reconfiguració dinàmica de l'ElasticCC és tant eficient que gairebé proporciona la mateixa taxa de fallades que una configuració amb el doble de memòria.Finalment, la tesi es centra en l'estudi del comportament de les memòries DRAM i els seus controladors en els CMPs. Es demostra que, tot i que els controladors tradicionals funcionen eficientment per uniprocessadors, en CMPs els diferents patrons d'accés obliguen a repensar com estan dissenyats aquests sistemes. S'han presentat múltiples sol·lucions per CMPs però totes elles es veuen limitades per un compromís entre el rendiment global i l'equitat en l'assignació de recursos. En aquesta tesi es proposen els Thread Row Buffers (TRBs), una zona d'emmagatenament extra a les memòries DRAM que permetria guardar files de dades específiques per a cada aplicació. Aquest mecanisme permet proporcionar un accés equitatiu a la memòria sense perjudicar el seu rendiment global. En resum, en aquesta tesi es presenten noves organitzacions per la jerarquia de memòria dels CMPs centrades en la escalabilitat i adaptativitat als requeriments de les aplicacions. Els resultats presentats demostren que les tècniques proposades proporcionen un millor rendiment i eficiència energètica que les millors tècniques existents fins a l'actualitat.Processor performance and memory performance have improved at different rates during the last decades, limiting processor performance and creating the well known "memory gap". Solving this performance difference is an important research field and new solutions must be proposed in order to have better processors in the future. Several solutions exist, such as caches, that reduce the impact of longer memory accesses and conform the system memory hierarchy. However, most of the existing memory hierarchy organizations were designed for single processors or traditional multiprocessors. Nowadays, the increasing number of available transistors has allowed the apparition of chip multiprocessors, which have different constraints and require new ad-hoc memory systems able to efficiently manage memory resources. Therefore, in this thesis we have focused on improving the performance and energy efficiency of the memory hierarchy of chip multiprocessors, ranging from caches to DRAM memories. In the first part of this thesis we have studied traditional cache organizations such as shared or private caches and we have seen that they behave well only for some applications and that an adaptive system would be desirable. State-of-the-art techniques such as Cooperative Caching (CC) take advantage of the benefits of both worlds. This technique, however, requires the usage of a centralized coherence structure and has a high energy consumption. Therefore we propose the Distributed Cooperative Caching (DCC), a mechanism to provide coherence to chip multiprocessors and apply the concept of cooperative caching in a distributed way. Through the usage of distributed directories we obtain a more scalable solution and, in addition, has a more flexible and energy-efficient tag allocation method. We also show that applications make different uses of cache and that an efficient allocation can take advantage of unused resources. We propose Elastic Cooperative Caching (ElasticCC), an adaptive cache organization able to redistribute cache resources dynamically depending on application requirements. One of the most important contributions of this technique is that adaptivity is fully managed by hardware and that all repartitioning mechanisms are based on distributed structures, allowing a better scalability. ElasticCC not only is able to repartition cache sizes to application requirements, but also is able to dynamically adapt to the different execution phases of each thread. Our experimental evaluation also has shown that the cache partitioning provided by ElasticCC is efficient and is almost able to match the off-chip miss rate of a configuration that doubles the cache space. Finally, we focus in the behavior of DRAM memories and memory controllers in chip multiprocessors. Although traditional memory schedulers work well for uniprocessors, we show that new access patterns advocate for a redesign of some parts of DRAM memories. Several organizations exist for multiprocessor DRAM schedulers, however, all of them must trade-off between memory throughput and fairness. We propose Thread Row Buffers, an extended storage area in DRAM memories able to store a data row for each thread. This mechanism enables a fair memory access scheduling without hurting memory throughput. Overall, in this thesis we present new organizations for the memory hierarchy of chip multiprocessors which focus on the scalability and of the proposed structures and adaptivity to application behavior. Results show that the presented techniques provide a better performance and energy-efficiency than existing state-of-the-art solutions

Proximity coherence for chip-multiprocessors

Many-core architectures provide an efficient way of harnessing the growing numbers of transistors available in modern fabrication processes; however, the parallel programs run on these platforms are increasingly limited by the energy and latency costs of communication. Existing designs provide a functional communication layer but do not necessarily implement the most efficient solution for chip-multiprocessors, placing limits on the performance of these complex systems. In an era of increasingly power limited silicon design, efficiency is now a primary concern that motivates designers to look again at the challenge of cache coherence. The first step in the design process is to analyse the communication behaviour of parallel benchmark suites such as Parsec and SPLASH-2. This thesis presents work detailing the sharing patterns observed when running the full benchmarks on a simulated 32-core x86 machine. The results reveal considerable locality of shared data accesses between threads with consecutive operating system assigned thread IDs. This pattern, although of little consequence in a multi-node system, corresponds to strong physical locality of shared data between adjacent cores on a chip-multiprocessor platform. Traditional cache coherence protocols, although often used in chip-multiprocessor designs, have been developed in the context of older multi-node systems. By redesigning coherence protocols to exploit new patterns such as the physical locality of shared data, improving the efficiency of communication, specifically in chip-multiprocessors, is possible. This thesis explores such a design – Proximity Coherence – a novel scheme in which L1 load misses are optimistically forwarded to nearby caches via new dedicated links rather than always being indirected via a directory structure.EPSRC DTA research scholarshi

Multithreading Aware Hardware Prefetching for Chip Multiprocessors

To take advantage of the processing power in the Chip Multiprocessors design, applications must be divided into semi-independent processes that can run concur- rently on multiple cores within a system. Therefore, programmers must insert thread synchronization semantics (i.e. locks, barriers, and condition variables) to synchro- nize data access between processes. Indeed, threads spend long time waiting to acquire the lock of a critical section. In addition, a processor has to stall execution to wait for load data accesses to complete. Furthermore, there are often independent instructions which include load instructions beyond synchronization semantics that could be executed in parallel while a thread waits on the synchronization semantics. The conveniences of the cache memories come with some extra cost in Chip Multiprocessors. Cache Coherence mechanisms address the Memory Consistency problem. However, Cache Coherence adds considerable overhead to memory accesses. Having aggressive prefetcher on different cores of a Chip Multiprocessor can definitely lead to significant system performance degradation when running multi-threaded applications. This result of prefetch-demand interference when a prefetcher in one core ends up pulling shared data from a producing core before it has been written, the cache block will end up transitioning back and forth between the cores and result in useless prefetch, saturating the memory bandwidth and substantially increase the latency to critical shared data. We present a hardware prefetcher that enables large performance improvements from prefetching in Chip Multiprocessors by significantly reducing prefetch-demand interference. Furthermore, it will utilize the time that a thread spends waiting on syn- chronization semantics to run ahead of the critical section to speculate and prefetch independent load instruction data beyond the synchronization semantics

CROSS-LAYER CUSTOMIZATION FOR LOW POWER AND HIGH PERFORMANCE EMBEDDED MULTI-CORE PROCESSORS

Due to physical limitations and design difficulties, computer processor architecture has shifted to multi-core and even many-core based approaches in recent years. Such architectures provide potentials for sustainable performance scaling into future peta-scale/exa-scale computing platforms, at affordable power budget, design complexity, and verification efforts. To date, multi-core processor products have been replacing uni-core processors in almost every market segment, including embedded systems, general-purpose desktops and laptops, and super computers. However, many issues still remain with multi-core processor architectures that need to be addressed before their potentials could be fully realized. People in both academia and industry research community are still seeking proper ways to make efficient and effective use of these processors. The issues involve hardware architecture trade-offs, the system software service, the run-time management, and user application design, which demand more research effort into this field. Due to the architectural specialties with multi-core based computers, a Cross-Layer Customization framework is proposed in this work, which combines application specific information and system platform features, along with necessary operating system service support, to achieve exceptional power and performance efficiency for targeted multi-core platforms. Several topics are covered with specific optimization goals, including snoop cache coherence protocol, inter-core communication for producer-consumer applications, synchronization mechanisms, and off-chip memory bandwidth limitations. Analysis of benchmark program execution with conventional mechanisms is made to reveal the overheads in terms of power and performance. Specific customizations are proposed to eliminate such overheads with support from hardware, system software, compiler, and user applications. Experiments show significant improvement on system performance and power efficiency

Cache coherency controller for MESI protocol based on FPGA

In modern techniques of building processors, manufactures using more than one processor in the integrated circuit (chip) and each processor called a core. The new chips of processors called a multi-core processor. This new design makes the processors to work simultanously for more than one job or all the cores working in parallel for the same job. All cores are similar in their design, and each core has its own cache memory, while all cores shares the same main memory. So if one core requestes a block of data from main memory to its cache, there should be a protocol to declare the situation of this block in the main memory and other cores.This is called the cache coherency or cache consistency of multi-core. In this paper a special circuit is designed using very high speed integrated circuit hardware description language (VHDL) coding and implemented using ISE Xilinx software. The protocol used in this design is the modified, exclusive, shared and invalid (MESI) protocol. Test results were taken by using test bench, and showed all the states of the protocol are working correctly

Runtime home mapping for effective memory resource usage

In tiled Chip Multiprocessors (CMPs) last-level cache (LLC) banks are usually shared but distributed among the tiles. A static mapping of cache blocks to the LLC banks leads to poor efficiency since a block may be mapped away from the tiles actually accessing it. Dynamic policies either rely on the static mapping of blocks to a set of banks (D-NUCA) or rely on the OS to dynamically load pages to statically mapped addresses (first-touch). In this paper, we propose Runtime Home Mapping (RHM), a new dynamic approach where the LLC home bank is determined at runtime by the memory controller when the block is fetched from main memory, trying to map each block as close as possible to the requestor thus speeding up execution time and lowering message latencies. Block migration and replication provide further improvements to basic RHM. Also, in a further optimization we eliminate the directory structure. All these optimizations involve specific NoC optimizations and co-designs. Results with PARSEC and SPLASH-2 applications show, when compared with alternative solutions, that RHM achieves a 41% and 35% average reduction in load and store latencies respectively compared to static mapping. This leads to an average reduction of 28% in applications execution.Lodde, M.; Flich Cardo, J. (2014). Runtime home mapping for effective memory resource usage. Microprocessors and Microsystems. 38(4):276-291. doi:10.1016/j.micpro.2014.03.008S27629138

Locality-oblivious cache organization leveraging single-cycle multi-hop NoCs

Locality has always been a critical factor in on-chip data placement on CMPs as accessing further-away caches has in the past been more costly than accessing nearby ones. Substantial research on locality-aware designs have thus focused on keeping a copy of the data private. However, this complicatesthe problem of data tracking and search/invalidation; tracking the state of a line at all on-chip caches at a directory or performing full-chip broadcasts are both non-scalable and extremely expensive solutions. In this paper, we make the case for Locality-Oblivious Cache Organization (LOCO), a CMP cache organization that leverages the on-chip network to create virtual single-cycle paths between distant caches, thus redefining the notion of locality. LOCO is a clustered cache organization, supporting both homogeneous and heterogeneous cluster sizes, and provides near single-cycle accesses to data anywhere within the cluster, just like a private cache. Globally, LOCO dynamically creates a virtual mesh connecting all the clusters, and performs an efficient global data search and migration over this virtual mesh, without having to resort to full-chip broadcasts or perform expensive directory lookups. Trace-driven and full system simulations running SPLASH-2 and PARSEC benchmarks show that LOCO improves application run time by up to 44.5% over baseline private and shared cache.Semiconductor Research CorporationUnited States. Defense Advanced Research Projects Agency (Semiconductor Technology Advanced Research Network