Edge Offloading in Smart Grid

The energy transition supports the shift towards more sustainable energy alternatives, paving towards decentralized smart grids, where the energy is generated closer to the point of use. The decentralized smart grids foresee novel data-driven low latency applications for improving resilience and responsiveness, such as peer-to-peer energy trading, microgrid control, fault detection, or demand response. However, the traditional cloud-based smart grid architectures are unable to meet the requirements of the new emerging applications such as low latency and high-reliability thus alternative architectures such as edge, fog, or hybrid need to be adopted. Moreover, edge offloading can play a pivotal role for the next-generation smart grid AI applications because it enables the efficient utilization of computing resources and addresses the challenges of increasing data generated by IoT devices, optimizing the response time, energy consumption, and network performance. However, a comprehensive overview of the current state of research is needed to support sound decisions regarding energy-related applications offloading from cloud to fog or edge, focusing on smart grid open challenges and potential impacts. In this paper, we delve into smart grid and computational distribution architec-tures, including edge-fog-cloud models, orchestration architecture, and serverless computing, and analyze the decision-making variables and optimization algorithms to assess the efficiency of edge offloading. Finally, the work contributes to a comprehensive understanding of the edge offloading in smart grid, providing a SWOT analysis to support decision making.Comment: to be submitted to journa

Energy and Delay Efficient Computation Offloading Solutions for Edge Computing

This thesis collects a selective set of outcomes of a PhD course in Electronics, Telecommunications, and Information Technologies Engineering and it is focused on designing techniques to optimize computational resources in different wireless communication environments. Mobile Edge Computing (MEC) is a novel and distributed computational paradigm that has emerged to address the high users demand in 5G. In MEC, edge devices can share their resources to collaborate in terms of storage and computation. One of the computational sharing techniques is computation offloading, which brings a lot of advantages to the network edge, from lower communication, to lower energy consumption for computation. However, the communication among the devices should be managed such that the resources are exploited efficiently. To this aim, in this dissertation, computation offloading in different wireless environments with different number of users, network traffic, resource availability and devices' location are analyzed in order to optimize the resource allocation at the network edge. To better organize the dissertation, the studies are classified in four main sections. In the first section, an introduction on computational sharing technologies is given. Later, the problem of computation offloading is defined, and the challenges are introduced. In the second section, two partial offloading techniques are proposed. While in the first one, centralized and distributed architectures are proposed, in the second work, an Evolutionary Algorithm for task offloading is proposed. In the third section, the offloading problem is seen from a different perspective where the end users can harvest energy from either renewable sources of energy or through Wireless Power Transfer. In the fourth section, the MEC in vehicular environments is studied. In one work a heuristic is introduced in order to perform the computation offloading in Internet of Vehicles and in the other a learning-based approach based on bandit theory is proposed

Fog Computing

Everything that is not a computer, in the traditional sense, is being connected to the Internet. These devices are also referred to as the Internet of Things and they are pressuring the current network infrastructure. Not all devices are intensive data producers and part of them can be used beyond their original intent by sharing their computational resources. The combination of those two factors can be used either to perform insight over the data closer where is originated or extend into new services by making available computational resources, but not exclusively, at the edge of the network. Fog computing is a new computational paradigm that provides those devices a new form of cloud at a closer distance where IoT and other devices with connectivity capabilities can offload computation. In this dissertation, we have explored the fog computing paradigm, and also comparing with other paradigms, namely cloud, and edge computing. Then, we propose a novel architecture that can be used to form or be part of this new paradigm. The implementation was tested on two types of applications. The first application had the main objective of demonstrating the correctness of the implementation while the other application, had the goal of validating the characteristics of fog computing.Tudo o que não é um computador, no sentido tradicional, está sendo conectado à Internet. Esses dispositivos também são chamados de Internet das Coisas e estão pressionando a infraestrutura de rede atual. Nem todos os dispositivos são produtores intensivos de dados e parte deles pode ser usada além de sua intenção original, compartilhando seus recursos computacionais. A combinação desses dois fatores pode ser usada para realizar processamento dos dados mais próximos de onde são originados ou estender para a criação de novos serviços, disponibilizando recursos computacionais periféricos à rede. Fog computing é um novo paradigma computacional que fornece a esses dispositivos uma nova forma de nuvem a uma distância mais próxima, onde “Things” e outros dispositivos com recursos de conectividade possam delegar processamento. Nesta dissertação, exploramos fog computing e também comparamos com outros paradigmas, nomeadamente cloud e edge computing. Em seguida, propomos uma nova arquitetura que pode ser usada para formar ou fazer parte desse novo paradigma. A implementação foi testada em dois tipos de aplicativos. A primeira aplicação teve o objetivo principal de demonstrar a correção da implementação, enquanto a outra aplicação, teve como objetivo validar as características de fog computing

Edge computing infrastructure for 5G networks: a placement optimization solution

This thesis focuses on how to optimize the placement of the Edge Computing infrastructure for upcoming 5G networks. To this aim, the core contributions of this research are twofold: 1) a novel heuristic called Hybrid Simulated Annealing to tackle the NP-hard nature of the problem and, 2) a framework called EdgeON providing a practical tool for real-life deployment optimization. In more detail, Edge Computing has grown into a key solution to 5G latency, reliability and scalability requirements. By bringing computing, storage and networking resources to the edge of the network, delay-sensitive applications, location-aware systems and upcoming real-time services leverage the benefits of a reduced physical and logical path between the end-user and the data or service host. Nevertheless, the edge node placement problem raises critical concerns regarding deployment and operational expenditures (i.e., mainly due to the number of nodes to be deployed), current backhaul network capabilities and non-technical placement limitations. Common approaches to the placement of edge nodes are based on: Mobile Edge Computing (MEC), where the processing capabilities are deployed at the Radio Access Network nodes and Facility Location Problem variations, where a simplistic cost function is used to determine where to optimally place the infrastructure. However, these methods typically lack the flexibility to be used for edge node placement under the strict technical requirements identified for 5G networks. They fail to place resources at the network edge for 5G ultra-dense networking environments in a network-aware manner. This doctoral thesis focuses on rigorously defining the Edge Node Placement Problem (ENPP) for 5G use cases and proposes a novel framework called EdgeON aiming at reducing the overall expenses when deploying and operating an Edge Computing network, taking into account the usage and characteristics of the in-place backhaul network and the strict requirements of a 5G-EC ecosystem. The developed framework implements several placement and optimization strategies thoroughly assessing its suitability to solve the network-aware ENPP. The core of the framework is an in-house developed heuristic called Hybrid Simulated Annealing (HSA), seeking to address the high complexity of the ENPP while avoiding the non-convergent behavior of other traditional heuristics (i.e., when applied to similar problems). The findings of this work validate our approach to solve the network-aware ENPP, the effectiveness of the heuristic proposed and the overall applicability of EdgeON. Thorough performance evaluations were conducted on the core placement solutions implemented revealing the superiority of HSA when compared to widely used heuristics and common edge placement approaches (i.e., a MEC-based strategy). Furthermore, the practicality of EdgeON was tested through two main case studies placing services and virtual network functions over the previously optimally placed edge nodes. Overall, our proposal is an easy-to-use, effective and fully extensible tool that can be used by operators seeking to optimize the placement of computing, storage and networking infrastructure at the users’ vicinity. Therefore, our main contributions not only set strong foundations towards a cost-effective deployment and operation of an Edge Computing network, but directly impact the feasibility of upcoming 5G services/use cases and the extensive existing research regarding the placement of services and even network service chains at the edge

Edge/Fog Computing Technologies for IoT Infrastructure

The prevalence of smart devices and cloud computing has led to an explosion in the amount of data generated by IoT devices. Moreover, emerging IoT applications, such as augmented and virtual reality (AR/VR), intelligent transportation systems, and smart factories require ultra-low latency for data communication and processing. Fog/edge computing is a new computing paradigm where fully distributed fog/edge nodes located nearby end devices provide computing resources. By analyzing, filtering, and processing at local fog/edge resources instead of transferring tremendous data to the centralized cloud servers, fog/edge computing can reduce the processing delay and network traffic significantly. With these advantages, fog/edge computing is expected to be one of the key enabling technologies for building the IoT infrastructure. Aiming to explore the recent research and development on fog/edge computing technologies for building an IoT infrastructure, this book collected 10 articles. The selected articles cover diverse topics such as resource management, service provisioning, task offloading and scheduling, container orchestration, and security on edge/fog computing infrastructure, which can help to grasp recent trends, as well as state-of-the-art algorithms of fog/edge computing technologies

An implementation of task processing on 4G-based mobile-edge computing systems

Mobile Edge Computing (MEC) is a new technology that facilitates low-latency cloud services to mobile devices (MDs) by pushing mobile computing, storage and network control to the network edge (closer to MDs), thereby prolonging the battery lifetime of MDs. One of the main objectives of MEC is to reduce latency and permit delay-sensitive applications in 4G and in the future, 5G communications. To achieve this feat, MEC aims to build up a computing platform by deploying edge servers (ESs) on the network edge. There is, therefore, a push to test the MEC performance on existinMobile Edge Computing (MEC) is a new technology that facilitates low-latency cloud services to mobile devices (MDs) by pushing mobile computing, storage and network control to the network edge, thereby prolonging the battery lifetime of MDs. Besides, MEC aims to reduce latency and permit delay-sensitive applications in 4G communications. There is, therefore, a push to test MEC performance on existing cellular systems. With the recently available mobile platform for academia SINET, NII can now connect MDs to ESs through 4G. This project focuses on the implementation of a physical 4G-based MEC System for task offloading, in which with the goal of achieving face detection, MD partially offload tasks to the ES under the instructions dictated by the offloading algorithms. Accordingly, the objectives of this thesis are to prove the efficiency of LTE based MEC systems in the real world focusing on its performance in terms of latency and battery consumption

Will SDN be part of 5G?

For many, this is no longer a valid question and the case is considered settled with SDN/NFV (Software Defined Networking/Network Function Virtualization) providing the inevitable innovation enablers solving many outstanding management issues regarding 5G. However, given the monumental task of softwarization of radio access network (RAN) while 5G is just around the corner and some companies have started unveiling their 5G equipment already, the concern is very realistic that we may only see some point solutions involving SDN technology instead of a fully SDN-enabled RAN. This survey paper identifies all important obstacles in the way and looks at the state of the art of the relevant solutions. This survey is different from the previous surveys on SDN-based RAN as it focuses on the salient problems and discusses solutions proposed within and outside SDN literature. Our main focus is on fronthaul, backward compatibility, supposedly disruptive nature of SDN deployment, business cases and monetization of SDN related upgrades, latency of general purpose processors (GPP), and additional security vulnerabilities, softwarization brings along to the RAN. We have also provided a summary of the architectural developments in SDN-based RAN landscape as not all work can be covered under the focused issues. This paper provides a comprehensive survey on the state of the art of SDN-based RAN and clearly points out the gaps in the technology.Comment: 33 pages, 10 figure