Power Scaling and Antenna Selection Techniques for Hybrid Beamforming in mmWave Massive MIMO Systems

With the advent of massive MIMO and mmWave, Antenna selection is the new frontier in hybrid beamforming employed in 5G base stations. Tele-operators are reworking on the components while upgrading to 5G where the antenna is a last-mile device. The burden on the physical layer not only demands smart and adaptive antennas but also an intelligent antenna selection mechanism to reduce power consumption and improve system capacity while degrading the hardware cost and complexity. This work focuses on reducing the power consumption and finding the optimal number of RF chains for a given millimeter wave massive MIMO system. At first, we investigate the power scaling method for both perfect Channel State Information (CSI) and imperfect CSI where the power is reduced by 1/number of antennas and 1/square root (number of antennas) respectively. We further propose to reduce the power consumption by emphasizing on the subdued resolution of Analog-to-Digital Converters (ADCs) with quantization awareness. The proposed algorithm selects the optimal number of antenna elements based on the resolution of ADCs without compromising on the quality of reception. The performance of the proposed algorithm shows significant improvement when compared with conventional and random antenna selection methods

Power Scaling and Antenna Selection Techniques for Hybrid Beamforming in mmWave Massive MIMO Systems

With the advent of massive MIMO and mmWave, Antenna selection is the new frontier in hybrid beamforming employed in 5G base stations. Tele-operators are reworking on the components while upgrading to 5G where the antenna is a last-mile device. The burden on the physical layer not only demands smart and adaptive antennas but also an intelligent antenna selection mechanism to reduce power consumption and improve system capacity while degrading the hardware cost and complexity. This work focuses on reducing the power consumption and finding the optimal number of RF chains for a given millimeter wave massive MIMO system. At first, we investigate the power scaling method for both perfect Channel State Information (CSI) and imperfect CSI where the power is reduced by 1/number of antennas and 1/square root (number of antennas) respectively. We further propose to reduce the power consumption by emphasizing on the subdued resolution of Analog-to-Digital Converters (ADCs) with quantization awareness. The proposed algorithm selects the optimal number of antenna elements based on the resolution of ADCs without compromising on the quality of reception. The performance of the proposed algorithm shows significant improvement when compared with conventional and random antenna selection methods

Full-Diversity QO-STBC Technique for Large-Antenna MIMO Systems

YesThe need to achieve high data rates in modern telecommunication systems, such as 5G standard, motivates the study and development of large antenna and multiple-input multiple-output (MIMO) systems. This study introduces a large antenna-order design of MIMO quasi-orthogonal space-time block code (QO-STBC) system that achieves better signal-to-noise ratio (SNR) and bit-error ratio (BER) performances than the conventional QO-STBCs with the potential for massive MIMO (mMIMO) configurations. Although some earlier MIMO standards were built on orthogonal space-time block codes (O-STBCs), which are limited to two transmit antennas and data rates, the need for higher data rates motivates the exploration of higher antenna configurations using different QO-STBC schemes. The standard QO-STBC offers a higher number of antennas than the O-STBC with the full spatial rate. Unfortunately, also, the standard QO-STBCs are not able to achieve full diversity due to self-interference within their detection matrices; this diminishes the BER performance of the QO-STBC scheme. The detection also involves nonlinear processing, which further complicates the system. To solve these problems, we propose a linear processing design technique (which eliminates the system complexity) for constructing interference-free QO-STBCs and that also achieves full diversity using Hadamard modal matrices with the potential for mMIMO design. Since the modal matrices that orthogonalize QO-STBC are not sparse, our proposal also supports O-STBCs with a well-behaved peak-to-average power ratio (PAPR) and better BER. The results of the proposed QO-STBC outperform other full diversity techniques including Givens-rotation and the eigenvalue decomposition (EVD) techniques by 15 dB for both MIMO and multiple-input single-output (MISO) antenna configurations at 10−3 BER. The proposed interference-free QO-STBC is also implemented for 16×NR and 32×NR MIMO systems, where NR≤2. We demonstrate 8 x 16 and 32 transmit antenna-enabled MIMO systems with the potential for mMIMO design applications with attractive BER and PAPR performance characteristics

Downlink Achievable Rate Analysis for FDD Massive MIMO Systems

Multiple-Input Multiple-Output (MIMO) systems with large-scale transmit antenna arrays, often called massive MIMO, are a very promising direction for 5G due to their ability to increase capacity and enhance both spectrum and energy efficiency. To get the benefit of massive MIMO systems, accurate downlink channel state information at the transmitter (CSIT) is essential for downlink beamforming and resource allocation. Conventional approaches to obtain CSIT for FDD massive MIMO systems require downlink training and CSI feedback. However, such training will cause a large overhead for massive MIMO systems because of the large dimensionality of the channel matrix. In this dissertation, we improve the performance of FDD massive MIMO networks in terms of downlink training overhead reduction, by designing an efficient downlink beamforming method and developing a new algorithm to estimate the channel state information based on compressive sensing techniques. First, we design an efficient downlink beamforming method based on partial CSI. By exploiting the relationship between uplink direction of arrivals (DoAs) and downlink direction of departures (DoDs), we derive an expression for estimated downlink DoDs, which will be used for downlink beamforming. Second, By exploiting the sparsity structure of downlink channel matrix, we develop an algorithm that selects the best features from the measurement matrix to obtain efficient CSIT acquisition that can reduce the downlink training overhead compared with conventional LS/MMSE estimators. In both cases, we compare the performance of our proposed beamforming method with traditional methods in terms of downlink achievable rate and simulation results show that our proposed method outperform the traditional beamforming methods