Wearable Fall Detector Using Recurrent Neural Networks

Falls have become a relevant public health issue due to their high prevalence and negative effects in elderly people. Wearable fall detector devices allow the implementation of continuous and ubiquitous monitoring systems. The effectiveness for analyzing temporal signals with low energy consumption is one of the most relevant characteristics of these devices. Recurrent neural networks (RNNs) have demonstrated a great accuracy in some problems that require analyzing sequential inputs. However, getting appropriate response times in low power microcontrollers remains a difficult task due to their limited hardware resources. This work shows a feasibility study about using RNN-based deep learning models to detect both falls and falls’ risks in real time using accelerometer signals. The effectiveness of four different architectures was analyzed using the SisFall dataset at different frequencies. The resulting models were integrated into two different embedded systems to analyze the execution times and changes in the model effectiveness. Finally, a study of power consumption was carried out. A sensitivity of 88.2% and a specificity of 96.4% was obtained. The simplest models reached inference times lower than 34 ms, which implies the capability to detect fall events in real-time with high energy efficiency. This suggests that RNN models provide an effective method that can be implemented in low power microcontrollers for the creation of autonomous wearable fall detection systems in real-time

An Automated Fall Detection System Using Recurrent Neural Networks

Falls are the most common cause of fatal injuries in elderly people, causing even death if there is no immediate assistance. Fall detection systems can be used to alert and request help when this type of accident happens. Certain types of these systems include wearable devices that analyze bio-medical signals from the person carrying it in real time. In this way, Deep Learning algorithms could automate and improve the detection of unintentional falls by analyzing these signals. These algorithms have proven to achieve high effectiveness with competitive performances in many classification problems. This work aims to study 16 Recurrent Neural Networks architectures (using Long Short-Term Memory and Gated Recurrent Units) for falls detection based on accelerometer data, reducing computational requirements of previous research. The architectures have been tested on a labeled version of the publicly available SisFall dataset, achieving a mean F1-score above 0.73 and improving state-of-the-art solutions in terms of network complexity.Ministerio de Economía y Competitivida TEC2016-77785-

Is the timed-up and go test feasible in mobile devices? A systematic review

The number of older adults is increasing worldwide, and it is expected that by 2050 over 2 billion individuals will be more than 60 years old. Older adults are exposed to numerous pathological problems such as Parkinson’s disease, amyotrophic lateral sclerosis, post-stroke, and orthopedic disturbances. Several physiotherapy methods that involve measurement of movements, such as the Timed-Up and Go test, can be done to support efficient and effective evaluation of pathological symptoms and promotion of health and well-being. In this systematic review, the authors aim to determine how the inertial sensors embedded in mobile devices are employed for the measurement of the different parameters involved in the Timed-Up and Go test. The main contribution of this paper consists of the identification of the different studies that utilize the sensors available in mobile devices for the measurement of the results of the Timed-Up and Go test. The results show that mobile devices embedded motion sensors can be used for these types of studies and the most commonly used sensors are the magnetometer, accelerometer, and gyroscope available in off-the-shelf smartphones. The features analyzed in this paper are categorized as quantitative, quantitative + statistic, dynamic balance, gait properties, state transitions, and raw statistics. These features utilize the accelerometer and gyroscope sensors and facilitate recognition of daily activities, accidents such as falling, some diseases, as well as the measurement of the subject's performance during the test execution.info:eu-repo/semantics/publishedVersio

Radar and RGB-depth sensors for fall detection: a review

This paper reviews recent works in the literature on the use of systems based on radar and RGB-Depth (RGB-D) sensors for fall detection, and discusses outstanding research challenges and trends related to this research field. Systems to detect reliably fall events and promptly alert carers and first responders have gained significant interest in the past few years in order to address the societal issue of an increasing number of elderly people living alone, with the associated risk of them falling and the consequences in terms of health treatments, reduced well-being, and costs. The interest in radar and RGB-D sensors is related to their capability to enable contactless and non-intrusive monitoring, which is an advantage for practical deployment and users’ acceptance and compliance, compared with other sensor technologies, such as video-cameras, or wearables. Furthermore, the possibility of combining and fusing information from The heterogeneous types of sensors is expected to improve the overall performance of practical fall detection systems. Researchers from different fields can benefit from multidisciplinary knowledge and awareness of the latest developments in radar and RGB-D sensors that this paper is discussing

Sampling Frequency Evaluation on Recurrent Neural Networks Architectures for IoT Real-time Fall Detection Devices

Falls are one of the most frequent causes of injuries in elderly people. Wearable Fall Detection Systems provided a ubiquitous tool for monitoring and alert when these events happen. Recurrent Neural Networks (RNN) are algorithms that demonstrates a great accuracy in some problems analyzing sequential inputs, such as temporal signal values. However, their computational complexity are an obstacle for the implementation in IoT devices. This work shows a performance analysis of a set of RNN architectures when trained with data obtained using different sampling frequencies. These architectures were trained to detect both fall and fall hazards by using accelerometers and were tested with 10-fold cross validation, using the F1-score metric. The results obtained show that sampling with a frequency of 25Hz does not affect the effectiveness, based on the F1-score, which implies a substantial increase in the performance in terms of computational cost. The architectures with two RNN layers and without a first dense layer had slightly better results than the smallest architectures. In future works, the best architectures obtained will be integrated in an IoT solution to determine the effectiveness empirically.Ministerio de Economía y Competitividad TEC2016-77785-

Elderly Fall Detection Systems: A Literature Survey

Falling is among the most damaging event elderly people may experience. With the ever-growing aging population, there is an urgent need for the development of fall detection systems. Thanks to the rapid development of sensor networks and the Internet of Things (IoT), human-computer interaction using sensor fusion has been regarded as an effective method to address the problem of fall detection. In this paper, we provide a literature survey of work conducted on elderly fall detection using sensor networks and IoT. Although there are various existing studies which focus on the fall detection with individual sensors, such as wearable ones and depth cameras, the performance of these systems are still not satisfying as they suffer mostly from high false alarms. Literature shows that fusing the signals of different sensors could result in higher accuracy and lower false alarms, while improving the robustness of such systems. We approach this survey from different perspectives, including data collection, data transmission, sensor fusion, data analysis, security, and privacy. We also review the benchmark data sets available that have been used to quantify the performance of the proposed methods. The survey is meant to provide researchers in the field of elderly fall detection using sensor networks with a summary of progress achieved up to date and to identify areas where further effort would be beneficial

Embedded machine learning using microcontrollers in wearable and ambulatory systems for health and care applications: a review

The use of machine learning in medical and assistive applications is receiving significant attention thanks to the unique potential it offers to solve complex healthcare problems for which no other solutions had been found. Particularly promising in this field is the combination of machine learning with novel wearable devices. Machine learning models, however, suffer from being computationally demanding, which typically has resulted on the acquired data having to be transmitted to remote cloud servers for inference. This is not ideal from the system’s requirements point of view. Recently, efforts to replace the cloud servers with an alternative inference device closer to the sensing platform, has given rise to a new area of research Tiny Machine Learning (TinyML). In this work, we investigate the different challenges and specifications trade-offs associated to existing hardware options, as well as recently developed software tools, when trying to use microcontroller units (MCUs) as inference devices for health and care applications. The paper also reviews existing wearable systems incorporating MCUs for monitoring, and management, in the context of different health and care intended uses. Overall, this work addresses the gap in literature targeting the use of MCUs as edge inference devices for healthcare wearables. Thus, can be used as a kick-start for embedding machine learning models on MCUs, focusing on healthcare wearables