Local flexibility market design for aggregators providing multiple flexibility services at distribution network level

This paper presents a general description of local flexibility markets as a market-based management mechanism for aggregators. The high penetration of distributed energy resources introduces new flexibility services like prosumer or community self-balancing, congestion management and time-of-use optimization. This work is focused on the flexibility framework to enable multiple participants to compete for selling or buying flexibility. In this framework, the aggregator acts as a local market operator and supervises flexibility transactions of the local energy community. Local market participation is voluntary. Potential flexibility stakeholders are the distribution system operator, the balance responsible party and end-users themselves. Flexibility is sold by means of loads, generators, storage units and electric vehicles. Finally, this paper presents needed interactions between all local market stakeholders, the corresponding inputs and outputs of local market operation algorithms from participants and a case study to highlight the application of the local flexibility market in three scenarios. The local market framework could postpone grid upgrades, reduce energy costs and increase distribution grids’ hosting capacity.Postprint (published version

Heuristic optimization of clusters of heat pumps: A simulation and case study of residential frequency reserve

The technological challenges of adapting energy systems to the addition of more renewables are intricately interrelated with the ways in which markets incentivize their development and deployment. Households with own onsite distributed generation augmented by electrical and thermal storage capacities (prosumers), can adjust energy use based on the current needs of the electricity grid. Heat pumps, as an established technology for enhancing energy efficiency, are increasingly seen as having potential for shifting electricity use and contributing to Demand Response (DR). Using a model developed and validated with monitoring data of a household in a plus-energy neighborhood in southern Germany, the technical and financial viability of utilizing household heat pumps to provide power in the market for Frequency Restoration Reserve (FRR) are studied. The research aims to evaluate the flexible electrical load offered by a cluster of buildings whose heat pumps are activated depending on selected rule-based participation strategies. Given the prevailing prices for FRR in Germany, the modelled cluster was unable to reduce overall electricity costs and thus was unable to show that DR participation as a cluster with the heat pumps is financially viable. Five strategies that differed in the respective contractual requirements that would need to be agreed upon between the cluster manager and the aggregator were studied. The relatively high degree of flexibility necessary for the heat pumps to participate in FRR activations could be provided to varying extents in all strategies, but the minimum running time of the heat pumps turned out to be the primary limiting physical (and financial) factor. The frequency, price and duration of the activation calls from the FRR are also vital to compensate the increase of the heat pumps’ energy use. With respect to thermal comfort and self-sufficiency constraints, the buildings were only able to accept up to 34% of the activation calls while remaining within set comfort parameters. This, however, also depends on the characteristics of the buildings. Finally, a sensitivity analysis showed that if the FRR market changed and the energy prices were more advantageous, the proposed approaches could become financially viable. This work suggests the need for further study of the role of heat pumps in flexibility markets and research questions concerning the aggregation of local clusters of such flexible technologies.Comisión Europea 69596

Dispersed storage and generation case studies

Three installations utilizing separate dispersed storage and generation (DSG) technologies were investigated. Each of the systems is described in costs and control. Selected institutional and environmental issues are discussed, including life cycle costs. No unresolved technical, environmental, or institutional problems were encountered in the installations. The wind and solar photovoltaic DSG were installed for test purposes, and appear to be presently uneconomical. However, a number of factors are decreasing the cost of DSG relative to conventional alternatives, and an increased DSG penetration level may be expected in the future

Carbon Free Boston: Energy Technical Report

Part of a series of reports that includes: Carbon Free Boston: Summary Report; Carbon Free Boston: Social Equity Report; Carbon Free Boston: Technical Summary; Carbon Free Boston: Buildings Technical Report; Carbon Free Boston: Transportation Technical Report; Carbon Free Boston: Waste Technical Report; Carbon Free Boston: Offsets Technical Report; Available at http://sites.bu.edu/cfb/INTRODUCTION: The adoption of clean energy in Boston’s buildings and transportation systems will produce sweeping changes in the quantity and composition of the city’s demand for fuel and electricity. The demand for electricity is expected to increase by 2050, while the demand for petroleum-based liquid fuels and natural gas within the city is projected to decline significantly. The city must meet future energy demand with clean energy sources in order to meet its carbon mitigation targets. That clean energy must be procured in a way that supports the City’s goals for economic development, social equity, environmental sustainability, and overall quality of life. This chapter examines the strategies to accomplish these goals. Improved energy efficiency, district energy, and in-boundary generation of clean energy (rooftop PV) will reduce net electric power and natural gas demand substantially, but these measures will not eliminate the need for electricity and gas (or its replacement fuel) delivered into Boston. Broadly speaking, to achieve carbon neutrality by 2050, the city must therefore (1) reduce its use of fossil fuels to heat and cool buildings through cost-effective energy efficiency measures and electrification of building thermal services where feasible; and (2) over time, increase the amount of carbon-free electricity delivered to the city. Reducing energy demand though cost effective energy conservation measures will be necessary to reduce the challenges associated with expanding the electricity delivery system and sustainably sourcing renewable fuels.Published versio

"Can Vehicle-to-Grid Revenue Help Electric Vehicles on the Market?"

Vehicle-to-grid (V2G) electric vehicles can return power stored in their batteries back to the power grid and be programmed to do so at times when power prices are high. Since providing this service can lead to payments to owners of vehicles, it effectively reduces the cost of electric vehicles. Using data from a national stated preference survey (n = 3029), this paper presents the first study of the potential consumer demand for V2G electric vehicles. In our choice experiment, 3029 respondents compared their preferred gasoline vehicle with two V2G electric vehicles. The V2G vehicles were described by a set of electric vehicle attributes and V2G contract requirements such as “required plug-in time” and “guaranteed minimum driving range”. The contract requirements specify a contract between drivers and a power aggregator for providing reserve power to the grid. Our findings suggest the V2G concept is mostly likely to help EVs on the market if power aggregators operate on pay-as-you-go-basis or provide consumers with advanced cash payment (upfront discounts on the price of EVs) in exchange for V2G restrictions.electric vehicles, vehicle-to-grid, stated preference, latent-class model

Cogeneration Technology Alternatives Study (CTAS). Volume 4: Energy conversion systems

Industrial processes from the largest energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed-cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum-based residual and distillate liquid fuels, and low Btu gas obtained through the on-site gasification of coal. An attempt was made to use consistent assumptions and a consistent set of ground rules specified by NASA for determining performance and cost. The advanced and commercially available cogeneration energy conversion systems studied in CTAS are fined together with their performance, capital costs, and the research and developments required to bring them to this level of performance

Improving power system efficiency in developing countries through performance contracting

In the United States, some large industrial and commercial energy users have sucessfully used energy performance contractors to effect energy savings in exchange for a share of the savings. In some developing countries, governments have considered various forms of government/utility performance contract, whereby the governments give the utilities more flexibility and autonomy in exchange for better performance. Why not merge the two concepts? A utility could engage a performance contractor to improve operations in exchange for a share of the savings - thereby allowing the utility to perform its performance contract with the government. The government would give the utility more autonomy in exchange for better performance.Economic Theory&Research,Town Water Supply and Sanitation,Energy Demand,Educational Sciences,Energy and Environment

Review of world experience and properties of materials for encapsulation of terrestrial photovoltaic arrays

Published and unpublished information relating to encapsulation systems and materials properties was collected by searching the literature and appropriate data bases (over 1,300 documents were selected and reviewed) and by personal contacts including site and company visits. A data tabulation summarizing world experience with terrestrial photovoltaic arrays (50 installations) is presented in the report. Based on criteria of properties, processability, availability, and cost, candidate materials were identified which have potential for use in encapsulation systems for arrays with a lifetime of over 20 years high reliability, an efficiency greater than 10 percent, a total price less than $500/kW, and a production capacity of 500,000 kW/yr. The recommended materials (all commercially available) include, depending upon the device design, various borosilicate and soda-lime glasses and numerous polymerics suitable for specific encapsulation system functions

Design Flexibility of Redox Flow Systems

The characteristics inherent in Redox flow systems permit considerable latitude in designing systems for specific storage applications. The first of these characteristics is the absence of plating/deplating reactions with their attendant morphology changes at the electrodes. This permits a given Redox system to operate over a wide range of depths of discharge and charge/discharge rates. The second characteristic is the separation of power generating components (stacks) from the energy storage components (tanks). This results in cost effective system design, ease of system growth via modularization, and freedom from sizing restraints so that the whole spectrum of applications, from utilities down to single residence can be considered. The final characteristic is the commonality of the reactant fluids which assures that all cells at all times are receiving reactants at the same state of charge. Since no cell can be out of balance with respect to any other cell, it is possible for some cells to be charged while others are discharging, in effect creating a DC to DC transformer. It is also possible for various groups of cells to be connected to separate loads, thus supplying a range of output voltages. Also, trim cells can be used to maintain constant bus voltage as the load is changed or as the depth of discharge increases. The commonality of reactant fluids also permits any corrective measures such as rebalancing to occur at the system level instead of at the single cell level