Novel Technique for Comprehensive Noise Identification and Cancellation in GSM Signal

Presence of noise significantly degrades the contents being transmitted over GSM channel. With the evolution of next generation of communication system, the challenges in noise cancellation in voice along with data transmission are not being addressed effectively by existing filters. Therefore, the proposed system offers a mechanism where emphasis is laid on identification of superior and inferior forms of GSM transient signal followed by cancellation of its noise level. Designed using analytical methodology, the proposed system harness the potential of probability theory to perform a modeling that associates allocated power of the transmitting device with the level of noise. The outcome of the study is found to offer a comprehensive identification of different forms of noise and can precisely determine the level of superior and inferior quality of signal. The outcome significantly assists in designing an accurate filter for noise cancellation in GSM signal

Hybrid Dy-NFIS & RLS equalization for ZCC code in optical-CDMA over multi-mode optical fiber

For long haul coherent optical fiber communication systems, it is significant to precisely monitor the quality of transmission links and optical signals. The channel capacity beyond Shannon limit of Single-mode optical fiber (SMOF) is achieved with the help of Multi-mode optical fiber (MMOF), where the signal is multiplexed in different spatial modes. To increase single-mode transmission capacity and to avoid a foreseen “capacity crunch”, researchers have been motivated to employ MMOF as an alternative. Furthermore, different multiplexing techniques could be applied in MMOF to improve the communication system. One of these techniques is the Optical Code Division Multiple Access (Optical-CDMA), which simplifies and decentralizes network controls to improve spectral efficiency and information security increasing flexibility in bandwidth granularity. This technique also allows synchronous and simultaneous transmission medium to be shared by many users. However, during the propagation of the data over the MMOF based on Optical-CDMA, an inevitable encountered issue is pulse dispersion, nonlinearity and MAI due to mode coupling. Moreover, pulse dispersion, nonlinearity and MAI are significant aspects for the evaluation of the performance of high-speed MMOF communication systems based on Optical-CDMA. This work suggests a hybrid algorithm based on nonlinear algorithm (Dynamic evolving neural fuzzy inference (Dy-NFIS)) and linear algorithm (Recursive least squares (RLS)) equalization for ZCC code in Optical-CDMA over MMOF. Root mean squared error (RMSE), mean squared error (MSE) and Structural Similarity index (SSIM) are used to measure performance results

Enabling Technology in Optical Fiber Communications: From Device, System to Networking

This book explores the enabling technology in optical fiber communications. It focuses on the state-of-the-art advances from fundamental theories, devices, and subsystems to networking applications as well as future perspectives of optical fiber communications. The topics cover include integrated photonics, fiber optics, fiber and free-space optical communications, and optical networking

Time and frequency offsets in all optical OFDM systems

Ultra-high-speed data transmission (terabit-per-second per channel) is urgently required in optical communication systems to fulfill the emerging demands of 3D multimedia applications, cloud computing, and bandwidth-hungry applications. In one way by using singlecarrier optical communication systems for the data transmission rates 1 Tb/s, we need the high baud rate and/or the high-order modulation formats (i.e. 512-QAM, 1024-QAM). Another way is to group the data carrying subcarriers without a guard bands (tightly spaced) to form a superchannel which gives increase in channel capacity. In a superchannel, the requirements of high-order modulation formats and high baud rates are relaxed. In an alloptical orthogonal frequency division multiplexing (AO-OFDM) system, the subcarriers are orthogonal and closely packed which gives more suitability to form superchannel. This thesis focuses on the time and frequency offsets in AO-OFDM systems. A theoretical model to investigate the performance of on-off-keying (OOK) modulated AO-OFDM system is developed for analytical simulation. The analytical (statistical) model considers the random characteristics of time and frequency offsets in adjacent subcarriers as well as the common noise sources such as shot and thermal noises to calculate the interference variances for evaluating the BER performance. The effects of time and frequency offsets on the BER performance of AO-OFDM system is evaluated with the number of optical subcarriers (NSC), receiver bandwidth (BWRX), and cyclic prefix (CP) We further develop an analytical model to evaluate the performance of AO-OFDM system with advanced modulation format (M-QAM) in the presence of time and frequency offsets, and the performance is compared with numerical simulations of other emulation setups (oddand- even subcarriers and decorrelated systems). The performance is investigated with NSC, BWRX, and CP in AO-OFDM system. A delay-line interferometer based all-optical method to reduce the effects of time and frequency offsets is proposed and evaluated. Finally, performance of demultiplexed subcarriers from an optical discrete Fourier transform (O-DFT) in AO-OFDM system in the presence of chromatic dispersion and limited modulation bandwidth is evaluated. The fiber Bragg grating (FBG) based passive device is proposed to reduce the interference and the results are compared with existing method using sampling gates. The proposed method using FBG for interference reduction provides a cost-effective design of AO-OFDM system

COMPUTATIONAL ANALYSIS OF CODE-MULTIPLEXED COULTER SENSOR SIGNALS

Nowadays, lab-on-a-chip (LoC) technology has been applied in a variety of applications because of its capability to perform accurate microscale manipulations of cells for point-of-care diagnostics. On the other hand, such a result is not readily available from an LoC device and typically still requires a post-inspection of the chip using traditional laboratory equipment such as a microscope, negating the advantages of the LoC technology. To solve this dilemma, my doctoral research mainly focuses on developing portable and disposable biosensors for interfacing with and digitizing the information from an LoC system. Our sensor platform, integrated with multiple microfluidic impedance sensors, electrically monitors and tracks manipulated cells on an LoC device. The sensor platform compresses information from each sensor into a 1-dimensional electrical waveform, and therefore, further signal processing is required to recover the readout of each sensor and extract information of detected cells. Furthermore, with the capability of the sensor platform, we have introduced integrated microfluidic cytometers to characterize properties of cells such as cell surface expression and mechanical properties.Ph.D

Recent Advances in Wireless Communications and Networks

This book focuses on the current hottest issues from the lowest layers to the upper layers of wireless communication networks and provides "real-time" research progress on these issues. The authors have made every effort to systematically organize the information on these topics to make it easily accessible to readers of any level. This book also maintains the balance between current research results and their theoretical support. In this book, a variety of novel techniques in wireless communications and networks are investigated. The authors attempt to present these topics in detail. Insightful and reader-friendly descriptions are presented to nourish readers of any level, from practicing and knowledgeable communication engineers to beginning or professional researchers. All interested readers can easily find noteworthy materials in much greater detail than in previous publications and in the references cited in these chapters

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

NASA Tech Briefs, December 1990

Topics: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences