Constellation Shaping for Bit-Interleaved LDPC Coded APSK

An energy-efficient approach is presented for shaping a bit-interleaved low-density parity-check (LDPC) coded amplitude phase-shift keying (APSK) system. A subset of the interleaved bits output by a binary LDPC encoder are passed through a nonlinear shaping encoder whose output is more likely to be a zero than a one. The "shaping" bits are used to select from among a plurality of subconstellations, while the unshaped bits are used to select the symbol within the subconstellation. Because the shaping bits are biased, symbols from lower-energy subconstellations are selected more frequently than those from higher-energy subconstellations. An iterative decoder shares information among the LDPC decoder, APSK demapper, and shaping decoder. Information rates are computed for a discrete set of APSK ring radii and shaping bit probabilities, and the optimal combination of these parameters is identified for the additive white Gaussian noise (AWGN) channel. With the assistance of extrinsic-information transfer (EXIT) charts, the degree distributions of the LDPC code are optimized for use with the shaped APSK constellation. Simulation results show that the combination of shaping, degree-distribution optimization, and iterative decoding can achieve a gain in excess of 1 dB in AWGN at a rate of 3 bits/symbol compared with a system that does not use shaping, uses an unoptimized code from the DVB-S2 standard, and does not iterate between decoder and demodulator.Comment: to appear in IEEE Transactions on Communication

Optimization of a Coded-Modulation System with Shaped Constellation

Conventional communication systems transmit signals that are selected from a signal constellation with uniform probability. However, information-theoretic results suggest that performance may be improved by shaping the constellation such that lower-energy signals are selected more frequently than higher-energy signals. This dissertation presents an energy efficient approach for shaping the constellations used by coded-modulation systems. The focus is on designing shaping techniques for systems that use a combination of amplitude phase shift keying (APSK) and low-density parity check (LDPC) coding. Such a combination is typical of modern satellite communications, such as the system used by the DVB-S2 standard.;The system implementation requires that a subset of the bits at the output of the LDPC encoder are passed through a nonlinear shaping encoder whose output bits are more likely to be a zero than a one. The constellation is partitioned into a plurality of sub-constellations, each with a different average signal energy, and the shaping bits are used to select the sub-constellation. An iterative receiver exchanges soft information among the demodulator, LDPC decoder, and shaping decoder. Parameters associated with the modulation and shaping code are optimized with respect to information rate, while the design of the LDPC code is optimized for the shaped modulation with the assistance of extrinsic-information transfer (EXIT) charts. The rule for labeling the constellation with bits is optimized using a novel hybrid cost function and a binary switching algorithm.;Simulation results show that the combination of constellation shaping, LDPC code optimization, and optimized bit labeling can achieve a gain in excess of 1 dB in an additive white Gaussian noise (AWGN) channel at a rate of 3 bits/symbol compared with a system that adheres directly to the DVB-S2 standard

Advanced constellation and demapper schemes for next generation digital terrestrial television broadcasting systems

206 p.Esta tesis presenta un nuevo tipo de constelaciones llamadas no uniformes. Estos esquemas presentan una eficacia de hasta 1,8 dB superior a las utilizadas en los últimos sistemas de comunicaciones de televisión digital terrestre y son extrapolables a cualquier otro sistema de comunicaciones (satélite, móvil, cable¿). Además, este trabajo contribuye al diseño de constelaciones con una nueva metodología que reduce el tiempo de optimización de días/horas (metodologías actuales) a horas/minutos con la misma eficiencia. Todas las constelaciones diseñadas se testean bajo una plataforma creada en esta tesis que simula el estándar de radiodifusión terrestre más avanzado hasta la fecha (ATSC 3.0) bajo condiciones reales de funcionamiento.Por otro lado, para disminuir la latencia de decodificación de estas constelaciones esta tesis propone dos técnicas de detección/demapeo. Una es para constelaciones no uniformes de dos dimensiones la cual disminuye hasta en un 99,7% la complejidad del demapeo sin empeorar el funcionamiento del sistema. La segunda técnica de detección se centra en las constelaciones no uniformes de una dimensión y presenta hasta un 87,5% de reducción de la complejidad del receptor sin pérdidas en el rendimiento.Por último, este trabajo expone un completo estado del arte sobre tipos de constelaciones, modelos de sistema, y diseño/demapeo de constelaciones. Este estudio es el primero realizado en este campo

A survey of digital television broadcast transmission techniques

This paper is a survey of the transmission techniques used in digital television (TV) standards worldwide. With the increase in the demand for High-Definition (HD) TV, video-on-demand and mobile TV services, there was a real need for more bandwidth-efficient, flawless and crisp video quality, which motivated the migration from analogue to digital broadcasting. In this paper we present a brief history of the development of TV and then we survey the transmission technology used in different digital terrestrial, satellite, cable and mobile TV standards in different parts of the world. First, we present the Digital Video Broadcasting standards developed in Europe for terrestrial (DVB-T/T2), for satellite (DVB-S/S2), for cable (DVB-C) and for hand-held transmission (DVB-H). We then describe the Advanced Television System Committee standards developed in the USA both for terrestrial (ATSC) and for hand-held transmission (ATSC-M/H). We continue by describing the Integrated Services Digital Broadcasting standards developed in Japan for Terrestrial (ISDB-T) and Satellite (ISDB-S) transmission and then present the International System for Digital Television (ISDTV), which was developed in Brazil by adopteding the ISDB-T physical layer architecture. Following the ISDTV, we describe the Digital Terrestrial television Multimedia Broadcast (DTMB) standard developed in China. Finally, as a design example, we highlight the physical layer implementation of the DVB-T2 standar

The efficient interleaving of digital-video-broadcasting-satellite 2nd generations system

The DVB-S2 system is designed as a toolbox to permit the execution of the satellite programs. Interleaver is an essential part of the DVB-S2 system. The current general block interleaver in DVB-S2 is not best, which leads to high BER and maybe not satisfy the requirements of the system. The purpose of this paper is to study the several interleaver types and comparative analyses are done between them to find which of these give better performance. Simulations results obtained prove that the 2D interleavers minimize BER more than other interleavers of DVB-S2. Further, the performance of 2D interleaver is better on a system that required a low SNR