100 research outputs found
A shuffled iterative bit-interleaved coded modulation receiver for the DVB-T2 standard: Design, implementation and FPGA prototyping
International audienceRotated QAM constellations improve Bit-Interleaved Coded Modulation (BICM) performance over fading channels. Indeed, an increased diversity is obtained by coupling a constellation rotation with interleaving between the real and imaginary components of transmitted symbols either in time or frequency domain. Iterative processing at the receiver side can provide additional improvement in performance. In this paper, an efficient shuffled iterative receiver is investigated for the second generation of the terrestrial digital video broadcasting standard DVB-T2. Scheduling an efficient message passing algorithm with low latency between the demapper and the LDPC decoder represents the main contribution. The design and the FPGA prototyping of the resultant shuffled iterative BICM receiver are then described. Architecture complexity and measured performance validate the potential of iterative receiver as a practical and competitive solution for the DVB-T2 standard
Parallel Implementation Strategies for MIMO ID-BICM Systems
[EN] One of the current techniques proposed for multiple transmit and receive antennas wireless communication systems is the use of error control coding and iterative detection and decoding at the receiver. These sophisticated techniques produce a significant increase of the computational cost and require large computational power. The use of modern computer facilities as multicore and multi-GPU (Graphics Processing Unit) processors can decrease the computational time required, representing a promising solution for the receiver implementation in these systems.
In this paper we explain how iterative receivers can improve the performance of suboptimal detectors. We also introduce a novel parallel receiver scheme based on a hybrid computing model where CPUs and GPUs work together to accelerate the detection and decoding steps; this design comes to exploit the features of the GPU NVIDIA Kepler architecture respect to the previous one in order to optimize the communication system performance.This work has been partially funded by PROMETEO/2009/013 project of Generalitat Valenciana, projects TEC2009-13741 of the Ministerio Español de Ciencia e Innovación, TEC2012-38142-C04 of the Ministerio Español de Economía y Competitividad, and PAID-05-2011 of Universitat Politècnica de València.Simarro Haro, MDLA.; Ramiro Sánchez, C.; Martínez Zaldívar, FJ.; Vidal Maciá, AM.; González Téllez, A.; Piñero Sipán, MG.; García Mollá, VM. (2013). Parallel Implementation Strategies for MIMO ID-BICM Systems. Waves. 5-13. http://hdl.handle.net/10251/57906S51
On the Convergence Speed of Turbo Demodulation with Turbo Decoding
Iterative processing is widely adopted nowadays in modern wireless receivers
for advanced channel codes like turbo and LDPC codes. Extension of this
principle with an additional iterative feedback loop to the demapping function
has proven to provide substantial error performance gain. However, the adoption
of iterative demodulation with turbo decoding is constrained by the additional
implied implementation complexity, heavily impacting latency and power
consumption. In this paper, we analyze the convergence speed of these combined
two iterative processes in order to determine the exact required number of
iterations at each level. Extrinsic information transfer (EXIT) charts are used
for a thorough analysis at different modulation orders and code rates. An
original iteration scheduling is proposed reducing two demapping iterations
with reasonable performance loss of less than 0.15 dB. Analyzing and
normalizing the computational and memory access complexity, which directly
impact latency and power consumption, demonstrates the considerable gains of
the proposed scheduling and the promising contributions of the proposed
analysis.Comment: Submitted to IEEE Transactions on Signal Processing on April 27, 201
Iterative decoding and detection for physical layer network coding
PhD ThesisWireless networks comprising multiple relays are very common and it is
important that all users are able to exchange messages via relays in the
shortest possible time. A promising technique to achieve this is physical
layer network coding (PNC), where the time taken to exchange messages
between users is achieved by exploiting the interference at the relay due
to the multiple incoming signals from the users. At the relay, the interference
is demapped to a binary sequence representing the exclusive-OR of
both users’ messages. The time to exchange messages is reduced because
the relay broadcasts the network coded message to both users, who can
then acquire the desired message by applying the exclusive-OR of their
original message with the network coded message. However, although
PNC can increase throughput it is at the expense of performance degradation
due to errors resulting from the demapping of the interference to
bits.
A number of papers in the literature have investigated PNC with an iterative
channel coding scheme in order to improve performance. However,
in this thesis the performance of PNC is investigated for end-to-end
(E2E) the three most common iterative coding schemes: turbo codes,
low-density parity-check (LDPC) codes and trellis bit-interleaved coded
modulation with iterative decoding (BICM-ID). It is well known that in
most scenarios turbo and LDPC codes perform similarly and can achieve
near-Shannon limit performance, whereas BICM-ID does not perform
quite as well but has a lower complexity. However, the results in this
thesis show that on a two-way relay channel (TWRC) employing PNC,
LDPC codes do not perform well and BICM-ID actually outperforms
them while also performing comparably with turbo codes. Also presented
in this thesis is an extrinsic information transfer (ExIT) chart
analysis of the iterative decoders for each coding scheme, which is used
to explain this surprising result. Another problem arising from the use
of PNC is the transfer of reliable information from the received signal at
the relay to the destination nodes. The demapping of the interference to
binary bits means that reliability information about the received signal
is lost and this results in a significant degradation in performance when
applying soft-decision decoding at the destination nodes. This thesis
proposes the use of traditional angle modulation (frequency modulation
(FM) and phase modulation (PM)) when broadcasting from the relay,
where the real and imaginary parts of the complex received symbols
at the relay modulate the frequency or phase of a carrier signal, while
maintaining a constant envelope. This is important since the complex
received values at the relay are more likely to be centred around zero and
it undesirable to transmit long sequences of low values due to potential
synchronisation problems at the destination nodes. Furthermore, the
complex received values, obtained after angle demodulation, are used to
derive more reliable log-likelihood ratios (LLRs) of the received symbols
at the destination nodes and consequently improve the performance of
the iterative decoders for each coding scheme compared with conventionally
coded PNC.
This thesis makes several important contributions: investigating the performance
of different iterative channel coding schemes combined with
PNC, presenting an analysis of the behaviour of different iterative decoding
algorithms when PNC is employed using ExIT charts, and proposing
the use of angle modulation at the relay to transfer reliable information
to the destination nodes to improve the performance of the iterative decoding
algorithms. The results from this thesis will also be useful for
future research projects in the areas of PNC that are currently being
addressed, such as synchronisation techniques and receiver design.Iraqi Ministry of Higher
Education and Scientific Research
Advanced constellation and demapper schemes for next generation digital terrestrial television broadcasting systems
206 p.Esta tesis presenta un nuevo tipo de constelaciones llamadas no uniformes. Estos esquemas presentan una eficacia de hasta 1,8 dB superior a las utilizadas en los últimos sistemas de comunicaciones de televisión digital terrestre y son extrapolables a cualquier otro sistema de comunicaciones (satélite, móvil, cable¿). Además, este trabajo contribuye al diseño de constelaciones con una nueva metodología que reduce el tiempo de optimización de días/horas (metodologías actuales) a horas/minutos con la misma eficiencia. Todas las constelaciones diseñadas se testean bajo una plataforma creada en esta tesis que simula el estándar de radiodifusión terrestre más avanzado hasta la fecha (ATSC 3.0) bajo condiciones reales de funcionamiento.Por otro lado, para disminuir la latencia de decodificación de estas constelaciones esta tesis propone dos técnicas de detección/demapeo. Una es para constelaciones no uniformes de dos dimensiones la cual disminuye hasta en un 99,7% la complejidad del demapeo sin empeorar el funcionamiento del sistema. La segunda técnica de detección se centra en las constelaciones no uniformes de una dimensión y presenta hasta un 87,5% de reducción de la complejidad del receptor sin pérdidas en el rendimiento.Por último, este trabajo expone un completo estado del arte sobre tipos de constelaciones, modelos de sistema, y diseño/demapeo de constelaciones. Este estudio es el primero realizado en este campo
A survey of digital television broadcast transmission techniques
This paper is a survey of the transmission techniques used in digital television (TV) standards worldwide. With the increase in the demand for High-Definition (HD) TV, video-on-demand and mobile TV services, there was a real need for more bandwidth-efficient, flawless and crisp video quality, which motivated the migration from analogue to digital broadcasting. In this paper we present a brief history of the development of TV and then we survey the transmission technology used in different digital terrestrial, satellite, cable and mobile TV standards in different parts of the world. First, we present the Digital Video Broadcasting standards developed in Europe for terrestrial (DVB-T/T2), for satellite (DVB-S/S2), for cable (DVB-C) and for hand-held transmission (DVB-H). We then describe the Advanced Television System Committee standards developed in the USA both for terrestrial (ATSC) and for hand-held transmission (ATSC-M/H). We continue by describing the Integrated Services Digital Broadcasting standards developed in Japan for Terrestrial (ISDB-T) and Satellite (ISDB-S) transmission and then present the International System for Digital Television (ISDTV), which was developed in Brazil by adopteding the ISDB-T physical layer architecture. Following the ISDTV, we describe the Digital Terrestrial television Multimedia Broadcast (DTMB) standard developed in China. Finally, as a design example, we highlight the physical layer implementation of the DVB-T2 standar
- …