A Simplified Min-Sum Decoding Algorithm for Non-Binary LDPC Codes

Non-binary low-density parity-check codes are robust to various channel impairments. However, based on the existing decoding algorithms, the decoder implementations are expensive because of their excessive computational complexity and memory usage. Based on the combinatorial optimization, we present an approximation method for the check node processing. The simulation results demonstrate that our scheme has small performance loss over the additive white Gaussian noise channel and independent Rayleigh fading channel. Furthermore, the proposed reduced-complexity realization provides significant savings on hardware, so it yields a good performance-complexity tradeoff and can be efficiently implemented.Comment: Partially presented in ICNC 2012, International Conference on Computing, Networking and Communications. Accepted by IEEE Transactions on Communication

Architectures for soft-decision decoding of non-binary codes

En esta tesis se estudia el dise¿no de decodificadores no-binarios para la correcci'on de errores en sistemas de comunicaci'on modernos de alta velocidad. El objetivo es proponer soluciones de baja complejidad para los algoritmos de decodificaci'on basados en los c'odigos de comprobaci'on de paridad de baja densidad no-binarios (NB-LDPC) y en los c'odigos Reed-Solomon, con la finalidad de implementar arquitecturas hardware eficientes. En la primera parte de la tesis se analizan los cuellos de botella existentes en los algoritmos y en las arquitecturas de decodificadores NB-LDPC y se proponen soluciones de baja complejidad y de alta velocidad basadas en el volteo de s'¿mbolos. En primer lugar, se estudian las soluciones basadas en actualizaci'on por inundaci 'on con el objetivo de obtener la mayor velocidad posible sin tener en cuenta la ganancia de codificaci'on. Se proponen dos decodificadores diferentes basados en clipping y t'ecnicas de bloqueo, sin embargo, la frecuencia m'axima est'a limitada debido a un exceso de cableado. Por este motivo, se exploran algunos m'etodos para reducir los problemas de rutado en c'odigos NB-LDPC. Como soluci'on se propone una arquitectura basada en difusi'on parcial para algoritmos de volteo de s'¿mbolos que mitiga la congesti'on por rutado. Como las soluciones de actualizaci 'on por inundaci'on de mayor velocidad son sub-'optimas desde el punto de vista de capacidad de correci'on, decidimos dise¿nar soluciones para la actualizaci'on serie, con el objetivo de alcanzar una mayor velocidad manteniendo la ganancia de codificaci'on de los algoritmos originales de volteo de s'¿mbolo. Se presentan dos algoritmos y arquitecturas de actualizaci'on serie, reduciendo el 'area y aumentando de la velocidad m'axima alcanzable. Por 'ultimo, se generalizan los algoritmos de volteo de s'¿mbolo y se muestra como algunos casos particulares puede lograr una ganancia de codificaci'on cercana a los algoritmos Min-sum y Min-max con una menor complejidad. Tambi'en se propone una arquitectura eficiente, que muestra que el 'area se reduce a la mitad en comparaci'on con una soluci'on de mapeo directo. En la segunda parte de la tesis, se comparan algoritmos de decodificaci'on Reed- Solomon basados en decisi'on blanda, concluyendo que el algoritmo de baja complejidad Chase (LCC) es la soluci'on m'as eficiente si la alta velocidad es el objetivo principal. Sin embargo, los esquemas LCC se basan en la interpolaci'on, que introduce algunas limitaciones hardware debido a su complejidad. Con el fin de reducir la complejidad sin modificar la capacidad de correcci'on, se propone un esquema de decisi'on blanda para LCC basado en algoritmos de decisi'on dura. Por 'ultimo se dise¿na una arquitectura eficiente para este nuevo esquemaGarcía Herrero, FM. (2013). Architectures for soft-decision decoding of non-binary codes [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/33753TESISPremiad

An Iteratively Decodable Tensor Product Code with Application to Data Storage

The error pattern correcting code (EPCC) can be constructed to provide a syndrome decoding table targeting the dominant error events of an inter-symbol interference channel at the output of the Viterbi detector. For the size of the syndrome table to be manageable and the list of possible error events to be reasonable in size, the codeword length of EPCC needs to be short enough. However, the rate of such a short length code will be too low for hard drive applications. To accommodate the required large redundancy, it is possible to record only a highly compressed function of the parity bits of EPCC's tensor product with a symbol correcting code. In this paper, we show that the proposed tensor error-pattern correcting code (T-EPCC) is linear time encodable and also devise a low-complexity soft iterative decoding algorithm for EPCC's tensor product with q-ary LDPC (T-EPCC-qLDPC). Simulation results show that T-EPCC-qLDPC achieves almost similar performance to single-level qLDPC with a 1/2 KB sector at 50% reduction in decoding complexity. Moreover, 1 KB T-EPCC-qLDPC surpasses the performance of 1/2 KB single-level qLDPC at the same decoder complexity.Comment: Hakim Alhussien, Jaekyun Moon, "An Iteratively Decodable Tensor Product Code with Application to Data Storage

Design of a GF(64)-LDPC Decoder Based on the EMS Algorithm

International audienceThis paper presents the architecture, performance and implementation results of a serial GF(64)-LDPC decoder based on a reduced-complexity version of the Extended Min-Sum algorithm. The main contributions of this work correspond to the variable node processing, the codeword decision and the elementary check node processing. Post-synthesis area results show that the decoder area is less than 20% of a Virtex 4 FPGA for a decoding throughput of 2.95 Mbps. The implemented decoder presents performance at less than 0.7 dB from the Belief Propagation algorithm for different code lengths and rates. Moreover, the proposed architecture can be easily adapted to decode very high Galois Field orders, such as GF(4096) or higher, by slightly modifying a marginal part of the design

High Performance Decoder Architectures for Error Correction Codes

Due to the rapid development of the information industry, modern communication and storage systems require much higher data rates and reliability to server various demanding applications. However, these systems suffer from noises from the practical channels. Various error correction codes (ECCs), such as Reed-Solomon (RS) codes, convolutional codes, turbo codes, Low-Density Parity-Check (LDPC) codes and so on, have been adopted in lots of current standards. With the increasing data rate, the research of more advanced ECCs and the corresponding efficient decoders will never stop.Binary LDPC codes have been adopted in lots of modern communication and storage applications due their superior error performance and efficient hardware decoder implementations. Non-binary LDPC (NB-LDPC) codes are an important extension of traditional binary LDPC codes. Compared with its binary counterpart, NB-LDPC codes show better error performance under short to moderate block lengths and higher order modulations. Moreover, NB-LDPC codes have lower error floor than binary LDPC codes. In spite of the excellent error performance, it is hard for current communication and storage systems to adopt NB-LDPC codes due to complex decoding algorithms and decoder architectures. In terms of hardware implementation, current NB-LDPC decoders need much larger area and achieve much lower data throughput.Besides the recently proposed NB-LDPC codes, polar codes, discovered by Ar{\i}kan, appear as a very promising candidate for future communication and storage systems. Polar codes are considered as a major breakthrough in recent coding theory society. Polar codes are proved to be capacity achieving codes over binary input symmetric memoryless channels. Besides, polar codes can be decoded by the successive cancelation (SC) algorithm with of complexity of $\mathcal{O}(N\log_2 N)$, where $N$ is the block length. The main sticking point of polar codes to date is that their error performance under short to moderate block lengths is inferior compared with LDPC codes or turbo codes. The list decoding technique can be used to improve the error performance of SC algorithms at the cost higher computational and memory complexities. Besides, the hardware implementation of current SC based decoders suffer from long decoding latency which is unsuitable for modern high speed communications.ECCs also find their applications in improving the reliability of network coding. Random linear network coding is an efficient technique for disseminating information in networks, but it is highly susceptible to errors. K\ {o}tter-Kschischang (KK) codes and Mahdavifar-Vardy (MV) codes are two important families of subspace codes that provide error control in noncoherent random linear network coding. List decoding has been used to decode MV codes beyond half distance. Existing hardware implementations of the rank metric decoder for KK codes suffer from limited throughput, long latency and high area complexity. The interpolation-based list decoding algorithm for MV codes still has high computational complexity, and its feasibility for hardware implementations has not been investigated.In this exam, we present efficient decoding algorithms and hardware decoder architectures for NB-LDPC codes, polar codes, KK and MV codes. For NB-LDPC codes, an efficient shuffled decoder architecture is presented to reduce the number of average iterations and improve the throughput. Besides, a fully parallel decoder architecture for NB-LDPC codes with short or moderate block lengths is also presented. Our fully parallel decoder architecture achieves much higher throughput and area efficiency compared with the state-of-art NB-LDPC decoders. For polar codes, a memory efficient list decoder architecture is first presented. Based on our reduced latency list decoding algorithm for polar codes, a high throughput list decoder architecture is also presented. At last, we present efficient decoder architectures for both KK and MV codes

High-Performance NB-LDPC Decoder With Reduction of Message Exchange

© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.This paper presents a novel algorithm based on trellis min-max for decoding non-binary low-density parity-check (NB-LDPC) codes. This decoder reduces the number of messages exchanged between check node and variable node processors, which decreases the storage resources and the wiring congestion and, thus, increases the throughput of the decoder. Our frame error rate performance simulations show that the proposed algorithm has a negligible performance loss for high-rate codes with GF(16) and GF(32), and a performance loss smaller than 0.07 dB for high-rate codes over GF(64). In addition, a layered decoder architecture is presented and implemented on a 90-nm CMOS process for the following high-rate NB-LDPC codes: (2304, 2048) over GF(16), (837, 726) over GF(32), and (1536, 1344) over GF(64). In all cases, the achieved throughput is higher than 1 Gb/s.This work was supported in part by the Spanish Ministerio de Ciencia e Innovacion under Grant TEC2011-27916 and Grant TEC2012-38558-C02-02, and in part by Generalitat Valenciana under Grant GV/2014/011.Lacruz, JO.; García Herrero, FM.; Canet Subiela, MJ.; Valls Coquillat, J. (2016). High-Performance NB-LDPC Decoder With Reduction of Message Exchange. IEEE Transactions on Very Large Scale Integration (VLSI) Systems. 24(5):1950-1961. https://doi.org/10.1109/TVLSI.2015.2493041S1950196124

Multiple Parallel Concatenated Gallager Codes: High Throughput Architecture Design and Implementation

The design of advanced wireless communication systems has been one of the most important research areas in recent years. High performance error correction schemes and high speed data services are at the heart of these systems. Due to the excellent performance of Low-Density Parity-Check (LDPC) codes, they are good candidates for many new wireless communication standards. However, complexity, latency scalability and flexibility remain a challenge. This thesis is concerned with investigating a new approach to coding and decoding LDPC codes based on Parallel Concatenated Gallager Code (PCGCs) using multiple constituent codes. These are a class of concatenated codes built from the direct parallel concatenation of LDPC codes without interleavers. They are characterized by a competitive BER performance while still maintaining the low complexity and flexibility attributes. New methods for encoding and decoding are presented together with BER simulation results showing the performance of these codes. Analysis in terms of the number of constituent codes is also carried out. Complexity analysis is performed and preliminary implementation results are also given based on a proposed high throughput architecture

One minimum only trellis decoder for non-binary low-density parity-check codes

© 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.A one minimum only decoder for Trellis-EMS (OMO T-EMS) and for Trellis-Min-max (OMO T-MM) is proposed in this paper. In this novel approach, we avoid computing the second minimum in messages of the check node processor, and propose efficient estimators to infer the second minimum value. By doing so, we greatly reduce the complexity and at the same time improve latency and throughput of the derived architectures compared to the existing implementations of EMS and Min-max decoders. This solution has been applied to various NB-LDPC codes constructed over different Galois fields and with different degree distributions showing in all cases negligible performance loss compared to the ideal EMS and Min-max algorithms. In addition, two complete decoders for OMO T-EMS and OMO T-MM were implemented for the (837,726) NB-LDPC code over GF(32) for comparison proposals. A 90 nm CMOS process was applied, achieving a throughput of 711 Mbps and 818 Mbps respectively at a clock frequency of 250 MHz, with an area of 19.02 ${rm mm}^{2}$ and 16.10 ${rm mm}^{2}$ after place and route. To the best knowledge of the authors, the proposed decoders have higher throughput and area-time efficiency than any other solution for high-rate NB-LDPC codes with high Galois field order.This work was supported in part by the Spanish Ministerio de Ciencia e Innovacion under Grant TEC2011-27916 and in part by the Universitat Politecnica de Valencia under Grant PAID-06-2012-SP20120625. The work of F. Garcia-Herrero was supported by the Spanish Ministerio de Educacion under Grant AP2010-5178. David Declercq has been funded by the Institut Universitaire de France for this project. This paper was recommended by Associate Editor Z. Zhang.Lacruz, JO.; García Herrero, FM.; Valls Coquillat, J.; Declercq, D. (2015). One minimum only trellis decoder for non-binary low-density parity-check codes. IEEE Transactions on Circuits and Systems I: Regular Papers. 62(1):177-184. https://doi.org/10.1109/TCSI.2014.2354753S17718462