Techniques and Challenges in Conducted EMI Analysis of Renewable Energy Systems

Renewable energy sources have been widely integrated into modern power systems, leading to the massive use of power converters, which represent the main sources of conducted electromagnetic (EM) noise. Furthermore, power grids employ interactive devices including smart meters that resort to powerline communication (PLC) technology and are usually more susceptible to EM noise than traditional electrical machinery. This paper provides a state-of-the-art overview of conducted EM interference (EMI) analysis in power systems, focusing on EMI prediction models, PLC coexistence issues, and measurement challenges. Insights into the use of various methods in different application scenarios are provided, and relevant future studies are foreseen

Voltage harmonic adjustment of Cuk and SEPIC converters

Voltage harmonics are present on electrical power lines today. These harmonics are voltage fluctuations which can be the result of dc to dc converters due to their high frequency switching called Pulse Width Modulation (PWM). PWM switch ON and OFF very quickly to control their output voltage. If harmonics are high enough, it can cause other equipment connected to that same power line to fail prematurely, due to the equipment operating outside its designed voltage margin. This thesis shows that voltage harmonics can be adjusted by randomizing the PWM signal which is supplied to two dc to dc converters. The randomization technique applied is Random Pulse Width Modulation (RPWM), Random Phase Position Modulation (RPPM) and a combination of both RPWM and RPPM. These randomization techniques are applied to Single Ended-Primary Inductor Converter (SEPIC) and Cuk converters. The results show that some randomization techniques can adjust the voltage harmonics if the applied PWM has enough time margin to randomize within each pulse. RPPM technique adjusted the voltage harmonics the most

EMC in Power Electronics and PCB Design

This dissertation consists of two parts. Part I is about Electromagnetic Compatibility (EMC) in power electronics and part II is about the Maximum Radiated Electromagnetic Emissions Calculator (MREMC), which is a software tool for EMC in printed circuit board (PCB) design. Switched-mode power converters can be significant sources of electromagnetic fields that interfere with the proper operation of nearby circuits or distant radio receivers. Part I of this dissertation provides comprehensive and organized information on the latest EMC developments in power converters. It describes and evaluates different technologies to ensure that power converters meet electromagnetic compatibility requirements. Chapters 2 and 3 describe EMC noise sources and coupling mechanisms in power converters. Chapter 4 reviews the measurements used to characterize and troubleshoot EMC problems. Chapters 5 - 8 cover passive filter solutions, active filter solutions, noise cancellation methods and reduced-noise driving schemes. Part II describes the methods used, calculations made, and implementation details of the MREMC, which is a software tool that allows the user to calculate the maximum possible radiated emissions that could occur due to specific source geometries on a PCB. Chapters 9 - 13 covers the I/O coupling EMI algorithm, Common-mode EMI algorithm, Power Bus EMI algorithm and Differential-Mode EMI algorithm used in the MREMC

Power Converters in Power Electronics

In recent years, power converters have played an important role in power electronics technology for different applications, such as renewable energy systems, electric vehicles, pulsed power generation, and biomedical sciences. Power converters, in the realm of power electronics, are becoming essential for generating electrical power energy in various ways. This Special Issue focuses on the development of novel power converter topologies in power electronics. The topics of interest include, but are not limited to: Z-source converters; multilevel power converter topologies; switched-capacitor-based power converters; power converters for battery management systems; power converters in wireless power transfer techniques; the reliability of power conversion systems; and modulation techniques for advanced power converters

A Comprehensive Survey on Different Control Strategies and Applications of Active Power Filters for Power Quality Improvement

This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).Power quality (PQ) has become an important topic in today’s power system scenario. PQ issues are raised not only in normal three-phase systems but also with the incorporation of different distributed generations (DGs), including renewable energy sources, storage systems, and other systems like diesel generators, fuel cells, etc. The prevalence of these issues comes from the non-linear features and rapid changing of power electronics devices, such as switch-mode converters for adjustable speed drives and diode or thyristor rectifiers. The wide use of these fast switching devices in the utility system leads to an increase in disturbances associated with harmonics and reactive power. The occurrence of PQ disturbances in turn creates several unwanted effects on the utility system. Therefore, many researchers are working on the enhancement of PQ using different custom power devices (CPDs). In this work, the authors highlight the significance of the PQ in the utility network, its effect, and its solution, using different CPDs, such as passive, active, and hybrid filters. Further, the authors point out several compensation strategies, including reference signal generation and gating signal strategies. In addition, this paper also presents the role of the active power filter (APF) in different DG systems. Some technical and economic considerations and future developments are also discussed in this literature. For easy reference, a volume of journals of more than 140 publications on this particular subject is reported. The effectiveness of this research work will boost researchers’ ability to select proper control methodology and compensation strategy for various applications of APFs for improving PQ.publishedVersio

Design and Control of Power Converters 2019

In this book, 20 papers focused on different fields of power electronics are gathered. Approximately half of the papers are focused on different control issues and techniques, ranging from the computer-aided design of digital compensators to more specific approaches such as fuzzy or sliding control techniques. The rest of the papers are focused on the design of novel topologies. The fields in which these controls and topologies are applied are varied: MMCs, photovoltaic systems, supercapacitors and traction systems, LEDs, wireless power transfer, etc