210,170 research outputs found

    Airtightness of UK dwellings

    Get PDF
    This paper presents the results and key messages that have been obtained from Phase 1 of a participatory action research project that was undertaken with 5 developers to investigate the practical design and construction issues that arise in making improvements to the airtightness of speculatively built mainstream housing. Two construction types were represented in the project, masonry cavity and light steel frame. Phase 1 of the project sought to assess in detail the design, construction and air permeability of 25 dwellings that were constructed to conform to the requirements of Approved Document Part L1 2002. While the total number of dwellings reported here is small, the results suggest that there is not a consistent approach to the way in which developers present information on air leakage to those on site, a mixture of approaches are utilised on site to achieve the same specification and there appears to be a lack of foresight in the detailed design stage, resulting in specifications that are practically very difficult to achieve. Despite this, the air permeability results suggest that dwellings constructed with a wet/mechanically plastered internal finish, can default to a reasonable standard of airtightness by UK standards, without much additional attention being given to airtightness

    Thermal improvement of existing dwellings

    Get PDF
    This report describes the outcome from a study to determine the impact of energy efficiency measures applied to the Scottish housing stock. Assuming conventional property type classifications, the present performance of the housing stock is quantified using available survey data. Building simulation techniques were then employed to generate a Web-based, decision-support tool for use by policy makers to estimate the impact of deploying energy efficiency measures in different combinations over time. The process of tool formulation is described and an example is given of tool use to identify best-value retrofitting options while taking factors such as future climate change and improved standard of living into account

    Can we improve the identification of cold homes for targeted home energy-efficiency improvements?

    Get PDF
    Objective: To investigate the extent to which homes with low indoor-temperatures can be identified from dwelling and household characteristics.Design: Analysis of data from a national survey of dwellings, occupied by low-income households, scheduled for home energy-efficiency improvements. Setting: Five urban areas of England: Birmingham, Liverpool, Manchester, Newcastle and Southampton.Methods: Half-hourly living-room temperatures were recorded for two to four weeks in dwellings over the winter periods November to April 2001-2002 and 2002-2003. Regression of indoor on outdoor temperatures was used to identify cold-homes in which standardized daytime living-room and/ or nighttime bedroom-temperatures were < 16 degrees C (when the outdoor temperature was 5 degrees C). Tabulation and logistic regression were used to examine the extent to which these cold-homes can be identified from dwelling and household characteristics.Results: Overall, 21.0% of dwellings had standardized daytime living-room temperatures < 16 degrees C and 46.4% had standardized nighttime bedroom-temperatures below the same temperature. Standardized indoor-temperatures were influenced by a wide range of household and dwelling characteristics, but most strongly by the energy efficiency (SAP) rating and by standardized heating costs. However, even using these variables, along with other dwelling and household characteristics in a multi-variable prediction model, it would be necessary to target more than half of all dwellings in our sample to ensure at least 80% sensitivity for identifying dwellings with cold living-room temperatures. An even higher proportion would have to be targeted to ensure 80% sensitivity for identifying dwellings with cold-bedroom temperatures.Conclusion: Property and household characteristics provide only limited potential for identifying dwellings where winter indoor temperatures are likely to be low, presumably because of the multiple influences on home heating, including personal choice and behaviour. This suggests that the highly selective targeting of energy-efficiency programmes is difficult to achieve if the primary aim is to identify dwellings with cold-indoor-temperatures. (c) 2006 Published by Elsevier Ltd

    Feasibility of a solar photo-voltaic system as an energy source for lighting in grid-connected residential buildings in Cameroon : case study of Buea : a thesis submitted in partial fulfilment of the requirements for the degree of Master of Environmental Management (without major) at Massey University, Palmerston North (New Zealand)

    Get PDF
    Cameroon has the second largest hydropower potential in Africa after the Democratic Republic of Congo. However, even with this potential, electricity supply in the country is insufficient and unreliable especially in the midst of the dry season, thus the many residents affected are inconvenienced due to lack of energy for lighting. This and coupled with climate change constraints, necessitates the investigation of measures geared towards effective utilization of the available energy from the grid and the feasibility of an alternative energy source to be employed in the onsite generation of electricity in residential buildings for lighting. In this research, a total of 100 residential dwellings of different classes (T1 to T7) were surveyed in the town of Buea, Cameroon. The survey employed the use of a questionnaire designed to collect data on current lighting technologies used in dwellings and the electricity load for lighting and basic communication appliances (radios and mobile phone chargers) of the dwellings. An economic and environmental analysis for transition towards efficient lighting in the surveyed dwellings was conducted. The load profiles of the dwellings classified from the k-means algorithm in R Statistics were used in the HOMER Pro software for a techno-economic modelling of residential PV systems (stand-alone and grid back-up) to meet the load of the dwellings. The survey had a questionnaire return rate of 92%. Results of the survey revealed that artificial lighting in the dwellings is achieved through the use of the following technologies: incandescent lamps, compact fluorescent lamps (CFL) and fluorescent tubes. The economic assessment of efficient lighting transition in the dwellings for an artificial daily lighting duration of six hours revealed a net present value (NPV) that ranges from 47(T1building)to47 (T1 building) to 282.02 (T5 building), a benefit cost ratio (BCR) of 1.84 and a simple payback period (PBP) of 0.17 year (2 months) for the substitution of current incandescent lamps in dwellings with CFL. The substitution of incandescent lamps with light emitting diodes (LED) revealed an NPV of the range 89.14(T1building)to89.14 (T1 building) to 370 (T5 building), a BCR of 3.18 and a PBP of 1.92 years (23 months). The substitution of incandescent lamps with CFL and LED results to a reduction in lighting related greenhouse gas (GHG) emissions from dwellings by 66.6% and 83.3% respectively. Results from the HOMER modelling revealed a levelized cost of electricity (LCOE) of the PV system under the following parameters: 0% annual capacity shortage, 40% minimum battery state if charge (SOC), 25 years PV lifetime, 5% discount rate and 2% inflation rate to be 10 to 13 times more expensive (stand-alone system) and four to eight times more expensive (back-up system) compared to the grid electricity. The PV systems have potentials to save an annual emission of 89.17 to 527.37 kgCO2-e for the stand-alone system. Favourable government policies are necessary to spur the deployment of these low carbon technologies in the residential sector of Cameroon

    Moisture Performance Criteria for UK Dwellings

    Get PDF
    The new ventilation regulations in England and Wales have introduced performance criteria for the control of mould. The UK Government\'s Building Regulations Research Programme has funded University College London (UCL) to investigate the extent to which these are the most appropriate criteria for thecontrol of mould in UK dwellings. This paper reports on the plans for this study which involve both field and laboratory related work. Some initial early work has already been undertaken and the paper summarises the progress to date. This initial work is based on analysis of data from a national study of England\'s Home Energy Efficiency scheme (Warm Front). Surveys were undertaken of dwellings and households participating in the scheme in five urban areas. Half-hourly living room and main bedroom temperatures and relative humidity measurements were recorded for two to four weeks (in the heating season) in approximately 1600 dwellings. This data is being analysed to investigate the typical relativehumidities that exist in UK dwellings and also any relationship that exists between these levels and the mould growth that was recorded

    The numbers game : 80- 200m2 Pigs, Pokes and Horses

    Get PDF
    The Highland Housing Expo, Scottish architects and low carbon dwellings

    Sustainable construction for the future - the role of government in energy efficiency and sustainability in buildings

    Get PDF
    This paper will summarise the findings from a study that explored the link between dwelling design, or type, and energy efficiencies in sub-tropical climates. An increasing number of government and private sector development companies are initiating projects that aim to deliver enhanced environmental outcomes at both sub-divisional and dwelling levels. The study used AccuRate, a new thermal modelling tool developed by CSIRO that responds to the need to improve ventilation modelling. The study found that dwellings developed in conjunction with the Departments of Housing and Public Works have set the benchmark. It provides a snapshot of the energy efficiency of a range of dwelling types found in recent subdivisions. However, the trend toward increasing urban densities may reduce the likelihood that cooling breezes will be available to cool dwellings. The findings are relevant to regulators, designers and industry in all states interested in reducing the energy used to cool dwellings in summer

    Sustainability and the Urban Planning Context: Housing Development in Algeria

    Get PDF
    This paper describes research into the development of housing in Algeria. It focuses on the history of traditional dwellings and the importance of outdoor space located inside the building: typically in the form of a courtyard. Courtyard dwellings in the city of Constantine are examined in some detail. The rapid urbanisation process taking place in Algeria in recent years together with difficulties in the planning system since colonial times has caused difficulties in responding to housing needs. The concentration of the population in smaller areas of cities has led to the need for more compact yet comfortable dwellings. The paper describes how the situation might be dealt with in the township of Jijel. A number of stakeholders are being consulted and the key results of in-depth interviews with architects are reported. The findings from the review of the existing housing areas and survey are then interpreted to make suggestions for development in the future

    Non-home: A Theoretical Approach to Migrants' Dwellings

    Get PDF
    In this article we introduce the notion of non-home as an attempt of meaningful insight into the migrants' dwelling constructed from elements of different provenance, depending on tenants housing experiences, definitions and the very materiality of a living space. In developing the idea of a non-home we refer to the theoretical concepts of non-places and heterotopias
    • 

    corecore