18 research outputs found

    Joint Subcarrier Pairing and Power Allocation for OFDM Transmission with Decode-and-Forward Relaying

    Full text link
    In this paper, a point-to-point Orthogonal Frequency Division Multiplexing (OFDM) system with a decode-and-forward (DF) relay is considered. The transmission consists of two hops. The source transmits in the first hop, and the relay transmits in the second hop. Each hop occupies one time slot. The relay is half-duplex, and capable of decoding the message on a particular subcarrier in one time slot, and re-encoding and forwarding it on a different subcarrier in the next time slot. Thus each message is transmitted on a pair of subcarriers in two hops. It is assumed that the destination is capable of combining the signals from the source and the relay pertaining to the same message. The goal is to maximize the weighted sum rate of the system by jointly optimizing subcarrier pairing and power allocation on each subcarrier in each hop. The weighting of the rates is to take into account the fact that different subcarriers may carry signals for different services. Both total and individual power constraints for the source and the relay are investigated. For the situations where the relay does not transmit on some subcarriers because doing so does not improve the weighted sum rate, we further allow the source to transmit new messages on these idle subcarriers. To the best of our knowledge, such a joint optimization inclusive of the destination combining has not been discussed in the literature. The problem is first formulated as a mixed integer programming problem. It is then transformed to a convex optimization problem by continuous relaxation, and solved in the dual domain. Based on the optimization results, algorithms to achieve feasible solutions are also proposed. Simulation results show that the proposed algorithms almost achieve the optimal weighted sum rate, and outperform the existing methods in various channel conditions.Comment: 33 pages, 11 figure

    A Multiband OFDMA Heterogeneous Network for Millimeter Wave 5G Wireless Applications

    Get PDF
    Citation: Niknam, S., Nasir, A. A., Mehrpouyan, H., & Natarajan, B. (2016). A Multiband OFDMA Heterogeneous Network for Millimeter Wave 5G Wireless Applications. Ieee Access, 4, 5640-5648. doi:10.1109/access.2016.2604364Emerging fifth generation (5G) wireless networks require massive bandwidth in higher frequency bands, extreme network densities, and flexibility of supporting multiple wireless technologies in order to provide higher data rates and seamless coverage. It is expected that the utilization of the large bandwidth in the millimeter-wave (mmWave) band and deployment of heterogeneous networks (HetNets) will help address the data rate requirements of 5G networks. However, high pathloss and shadowing in the mmWave frequency band, strong interference in the HetNets due to massive network densification, and coordination of various air interfaces are challenges that must be addressed. In this paper, we consider a relay based multiband orthogonal frequency division multiple access HetNet in which mmWave small cells are deployed within the service area of macro cells. In particular, we attempt to exploit the distinct propagation characteristics of mmWave bands (i.e., 60 GHz-the V-band and 70-80 GHz the E-band) and the long term evolution band to maximize overall data rate of the network via efficient resource allocation. The problem is solved using a modified dual decomposition approach and then a low complexity greedy solution based on the iterative activity selection algorithm is presented. Simulation results show that the proposed approach outperforms conventional schemes

    Adaptive Resource Allocation for Improved DF Aided Downlink Multi-User OFDM Systems

    Full text link

    Adaptive relaying protocol multiple-input multiple-output orthogonal frequency division multiplexing systems

    Get PDF
    In wireless broadband communications, orthogonal frequency division multiplexing (OFDM) has been adopted as a promising technique to mitigate multi-path fading and provide high spectral efficiency. In addition, cooperative communication can explore spatial diversity where several users or nodes share their resources and cooperate through distributed transmission. The concatenation of the OFDM technique with relaying systems can enhance the overall performance in terms of spectral efficiency and improve robustness against the detrimental effects of fading. Hybrid relay selection is proposed to overcome the drawbacks of conventional forwarding schemes. However, exciting hybrid relay protocols may suffer some limitations when used for transmission over frequency-selective channels. The combination of cooperative protocols with OFDM systems has been extensively utilized in current wireless networks, and have become a promising solution for future high data rate broadband communication systems including 3D video transmission. This thesis covers two areas of high data rate networks. In the first part, several techniques using cooperative OFDM systems are presented including relay selection, space time block codes, resource allocation and adaptive bit and power allocation to introduce diversity. Four (4) selective OFDM relaying schemes are studied over wireless networks; selective OFDM; selective OFDMA; selective block OFDM and selective unequal block OFDM. The closed-form expression of these schemes is derived. By exploiting the broadcast nature, it is demonstrated that spatial diversity can be improved. The upper bound of outage probability for the protocols is derived. A new strategy for hybrid relay selection is proposed to improve the system performance by removing the sub-carriers that experience deep fading. The per subcarrier basis selection is considered with respect to the predefined threshold signal-to-noise ratio. The closed-form expressions of the proposed protocol in terms of bit error probability and outage probability are derived and compared with conventional hybrid relay selection. Adaptive bit and power allocation is also discussed to improve the system performance. Distributed space frequency coding applied to hybrid relay selection to obtain full spatial and full data rate transmission is explored. Two strategies, single cluster and multiple clusters, are considered for the Alamouti code at the destination by using a hybrid relay protocol. The power allocation with and without sub-carrier pairing is also investigated to mitigate the effect of multipath error propagation in frequency-selective channels. The second part of this thesis investigates the application of cooperative OFDM systems to high data rate transmission. Recently, there has been growing attention paid to 3D video transmission over broadband wireless channels. Two strategies for relay selection hybrid relay selection and first best second best are proposed to implement unequal error protection in the physical layer over error prone channels. The closed-form expressions of bit error probability and outage probability for both strategies are examined. The peak signal-to-noise ratio is presented to show the quality of reconstruction of the left and right views

    Robust Transceiver with Tomlinson-Harashima Precoding for Amplify-and-Forward MIMO Relaying Systems

    Get PDF
    In this paper, robust transceiver design with Tomlinson-Harashima precoding (THP) for multi-hop amplify-and-forward (AF) multiple-input multiple-output (MIMO) relaying systems is investigated. At source node, THP is adopted to mitigate the spatial intersymbol interference. However, due to its nonlinear nature, THP is very sensitive to channel estimation errors. In order to reduce the effects of channel estimation errors, a joint Bayesian robust design of THP at source, linear forwarding matrices at relays and linear equalizer at destination is proposed. With novel applications of elegant characteristics of multiplicative convexity and matrix-monotone functions, the optimal structure of the nonlinear transceiver is first derived. Based on the derived structure, the transceiver design problem reduces to a much simpler one with only scalar variables which can be efficiently solved. Finally, the performance advantage of the proposed robust design over non-robust design is demonstrated by simulation results.Comment: IEEE Journal on Selected Areas in Communications - Special Issue on Theories and Methods for Advanced Wireless Relays The final version and several typos have been correcte

    Resource allocation and optimization techniques in wireless relay networks

    Get PDF
    Relay techniques have the potential to enhance capacity and coverage of a wireless network. Due to rapidly increasing number of smart phone subscribers and high demand for data intensive multimedia applications, the useful radio spectrum is becoming a scarce resource. For this reason, two way relay network and cognitive radio technologies are required for better utilization of radio spectrum. Compared to the conventional one way relay network, both the uplink and the downlink can be served simultaneously using a two way relay network. Hence the effective bandwidth efficiency is considered to be one time slot per transmission. Cognitive networks are wireless networks that consist of different types of users, a primary user (PU, the primary license holder of a spectrum band) and secondary users (SU, cognitive radios that opportunistically access the PU spectrum). The secondary users can access the spectrum of the licensed user provided they do not harmfully affect to the primary user. In this thesis, various resource allocation and optimization techniques have been investigated for wireless relay and cognitive radio networks

    Resource allocation for relay based green communication systems

    Get PDF
    The relay based cooperative network is one of the promising techniques for next generation wireless communications, which can help extend the cell coverage and enhance the diversity. To deploy relays efficiently with limited power and bandwidth under certain performance requirements, resource allocation (RA) plays an increasingly important role in the system design. In recent years, with the fast growth of the number of mobile phone users, great portion of CO2 emission is contributed by wireless communication systems. The combination of relay techniques and RA schemes reveals the solution to green communications, which aims to provide high data rate with low power consumption. In this thesis, RA is investigated for next generation relay based green wireless systems, including the long-range cellular systems, and the short-range point-to-point (P2P) systems. In the first contribution, an optimal asymmetric resource allocation (ARA) scheme is proposed for the decode-and-forward (DF) dual-hop multi-relay OFDMA cellular systems in the downlink. With this scheme, the time slots for the two hops via each of the relays are designed to be asymmetric, i.e., with K relays in a cell, a total of 2K time slots may be of different durations, which enhances the degree of freedom over the previous work. Also, a destination may be served by multiple relays at the same time to enhance the transmission diversity. Moreover, closed-form results for optimal resource allocation are derived, which require only limited amount of feedback information. Numerical results show that, due to the multi-time and multi-relay diversities, the proposed ARA scheme can provide a much better performance than the scheme with symmetric time allocation, as well as the scheme with asymmetric time allocation for a cell composed of independent single-relay sub-systems, especially when the relays are relatively close to the source. As a result, with the optimal relay location, the system can achieve high throughput in downlink with limited transmit power. In the second contribution, the power consumption in relay based 60 GHz cooperative networks is studied, which is based on three-terminal diversity amplify-and-forward (DAF) and diversity DF (DDF) relaying strategies. A total power consumption model including drive power, decoding power, and power consumption of power amplifier (PA) is proposed, excluding the transmit power, as it is relatively small compared to decoding power and PA power in the indoor environment. This model is formulated as a function of drive power, which gives an easy access to the system level power allocation. To minimise the system total power consumption, the optimal drive power can be allocated to the source node by numerical searching method while satisfying the data rate requirement. The impact of relay locations on the total power consumption is also investigated. It is shown that, with the same data rate requirement, in the small source-relay separation case, DAF consumes slightly less power than DDF; while with larger source-relay separation, DAF consumes much more power than DDF. In the future work, multiuser relay-based short-range communication systems will be considered for the 60 GHz communication in the fading channel scenario, which extends the proposed power consumption model in a more practical way. The power consumption model of other components, such as analog-to-digital converter, data buffer, modulation/demodulation could also be considered to provide more details about green P2P communications
    corecore