Rogue Drone Detection: A Machine Learning Approach

The emerging, practical and observed issue of how to detect rogue drones that carry terrestrial user equipment (UEs) on mobile networks is addressed in this paper. This issue has drawn much attention since the rogue drones may generate excessive interference to mobile networks and may not be allowed by regulations in some regions. In this paper, we propose a novel machine learning approach to identify the rogue drones in mobile networks based on radio measurements. We apply two classification machine learning models, Logistic Regression, and Decision Tree, using features from radio measurements to identify the rogue drones. We find that for high altitudes the proposed machine learning solutions can yield high rogue drone detection rate while not mis-classifying regular ground based UEs as rogue drone UEs. The detection accuracy however degrades at low altitudes.Comment: Submitted to Globecom 201

Detection solution analysis for simplistic spoofing attacks in commercial mini and micro UAVs

Enamus droone kasutab lennundusest pärit GPS navigatsiooniseadmeid, millel puuduvad turvaprotokollid ning nende riskioht pahatahtlike rünnakute sihtmärgina on kasvanud hüppeliselt lähimineviku arengute ja progressi tõttu SDR ja GNSS simulatsioonitarkvara valdkonnas. See on loonud ligipääsu tehnikale amatöörkasutajatele, millel on saatja aadressi võltsimise jõudlus. Need potensiaalsed rünnakud kuuluvad lihtsakoeliste kategooriasse, kuid selle uurimustöö tulemusena selgus, et nendes rünnakute edukuses on olulised erinevused teatud GPS vastuvõtjate ja konfiguratsioonide vahel. \n\rSee uurimustöö analüüsis erinevaid saatja aadressi võltsimise avastamise meetodeid, mis olid avatud kasutajatele ning valis välja need, mis on sobilikud mini- ja mikrodroonide tehnonõuetele ja operatsioonistsenaariumitele, eesmärgiga pakkuda välja GPS aadresside rünnakute avastamiseks rakenduste tasandil avatud allikakoodiga Ground Control Station tarkvara SDK. Avastuslahenduse eesmärk on jälgida ja kinnitada äkilisi, abnormaalseid või ebaloogilisi tulemväärtusi erinevates drooni sensiorites lisaallkatest pärit lisainfoga. \n\rLäbiviidud testid kinnitavad, et olenevalt olukorrast ja tingimustest saavad saatja aadressi võltsimise rünnakud õnnestuda. Rünnakud piiravad GPS mehanismide ligipääsu, mida saab kasutada rünnakute avastuseks. Neid rünnakuid puudutav info asetseb infovoos või GPSi signaalprotsessi tasandis, kuid seda infot ei saa haarata tasandile kus SDK tarkvara haldab kõigi teiste sensorite infot.Most of UAVs are GPS navigation based aircrafts that rely on a system with lack of security, their latent risk against malicious attacks has been raised with the recent progress and development in SDRs and GNSS simulation software, facilitating to amateurs the accessibility of equipment with spoofing capabilities. The attacks which can be done with this setup belong to the category simplistic, however, during this thesis work there are validated different cases of successful results under certain GPS receivers’ state or configuration.\n\rThis work analysis several spoofing detection methods found in the open literature, and selects the ones which can be suitable for mini and micro UAV technical specifications and operational scenario, for proposing a GPS spoofing detection solution developed in the application layer of an open source code Ground Control Station software SDK. The detection solution is intended to monitor and correlate abrupt, abnormal or unreasonable values of different sensors of the UAV with data obtained from available additional sources.\n\rThe conducted tests validate the cases and circumstances where the spoofing attacks were successful. Limitations include the lack of mechanisms to access GPS values which can be useful for detection spoofing attacks, but reside in the data bit or signal processing layer of the GPS and can not be retrieve to the layer where the SDK in computing all data of other sensors

Signal fingerprinting and machine learning framework for UAV detection and identification.

Advancement in technology has led to creative and innovative inventions. One such invention includes unmanned aerial vehicles (UAVs). UAVs (also known as drones) are now an intrinsic part of our society because their application is becoming ubiquitous in every industry ranging from transportation and logistics to environmental monitoring among others. With the numerous benign applications of UAVs, their emergence has added a new dimension to privacy and security issues. There are little or no strict regulations on the people that can purchase or own a UAV. For this reason, nefarious actors can take advantage of these aircraft to intrude into restricted or private areas. A UAV detection and identification system is one of the ways of detecting and identifying the presence of a UAV in an area. UAV detection and identification systems employ different sensing techniques such as radio frequency (RF) signals, video, sounds, and thermal imaging for detecting an intruding UAV. Because of the passive nature (stealth) of RF sensing techniques, the ability to exploit RF sensing for identification of UAV flight mode (i.e., flying, hovering, videoing, etc.), and the capability to detect a UAV at beyond visual line-of-sight (BVLOS) or marginal line-of-sight makes RF sensing techniques promising for UAV detection and identification. More so, there is constant communication between a UAV and its ground station (i.e., flight controller). The RF signals emitting from a UAV or UAV flight controller can be exploited for UAV detection and identification. Hence, in this work, an RF-based UAV detection and identification system is proposed and investigated. In RF signal fingerprinting research, the transient and steady state of the RF signals can be used to extract a unique signature. The first part of this work is to use two different wavelet analytic transforms (i.e., continuous wavelet transform and wavelet scattering transform) to investigate and analyze the characteristics or impacts of using either state for UAV detection and identification. Coefficient-based and image-based signatures are proposed for each of the wavelet analysis transforms to detect and identify a UAV. One of the challenges of using RF sensing is that a UAV\u27s communication links operate at the industrial, scientific, and medical (ISM) band. Several devices such as Bluetooth and WiFi operate at the ISM band as well, so discriminating UAVs from other ISM devices is not a trivial task. A semi-supervised anomaly detection approach is explored and proposed in this research to differentiate UAVs from Bluetooth and WiFi devices. Both time-frequency analytical approaches and unsupervised deep neural network techniques (i.e., denoising autoencoder) are used differently for feature extraction. Finally, a hierarchical classification framework for UAV identification is proposed for the identification of the type of unmanned aerial system signal (UAV or UAV controller signal), the UAV model, and the operational mode of the UAV. This is a shift from a flat classification approach. The hierarchical learning approach provides a level-by-level classification that can be useful for identifying an intruding UAV. The proposed frameworks described here can be extended to the detection of rogue RF devices in an environment

Unmanned Aerial Vehicles (UAVs) in environmental biology: A Review

Acquiring information about the environment is a key step during each study in the field of environmental biology at different levels, from an individual species to community and biome. However, obtaining information about the environment is frequently difficult because of, for example, the phenological timing, spatial distribution of a species or limited accessibility of a particular area for the field survey. Moreover, remote sensing technology, which enables the observation of the Earth’s surface and is currently very common in environmental research, has many limitations such as insufficient spatial, spectral and temporal resolution and a high cost of data acquisition. Since the 1990s, researchers have been exploring the potential of different types of unmanned aerial vehicles (UAVs) for monitoring Earth’s surface. The present study reviews recent scientific literature dealing with the use of UAV in environmental biology. Amongst numerous papers, short communications and conference abstracts, we selected 110 original studies of how UAVs can be used in environmental biology and which organisms can be studied in this manner. Most of these studies concerned the use of UAV to measure the vegetation parameters such as crown height, volume, number of individuals (14 studies) and quantification of the spatio-temporal dynamics of vegetation changes (12 studies). UAVs were also frequently applied to count birds and mammals, especially those living in the water. Generally, the analytical part of the present study was divided into following sections: (1) detecting, assessing and predicting threats on vegetation, (2) measuring the biophysical parameters of vegetation, (3) quantifying the dynamics of changes in plants and habitats and (4) population and behaviour studies of animals. At the end, we also synthesised all the information showing, amongst others, the advances in environmental biology because of UAV application. Considering that 33% of studies found and included in this review were published in 2017 and 2018, it is expected that the number and variety of applications of UAVs in environmental biology will increase in the future

Standardization Roadmap for Unmanned Aircraft Systems, Version 1.0

This Standardization Roadmap for Unmanned Aircraft Systems, Version 1.0 (“roadmap”) represents the culmination of the UASSC’s work to identify existing standards and standards in development, assess gaps, and make recommendations for priority areas where there is a perceived need for additional standardization and/or pre-standardization R&D. The roadmap has examined 64 issue areas, identified a total of 60 gaps and corresponding recommendations across the topical areas of airworthiness; flight operations (both general concerns and application-specific ones including critical infrastructure inspections, commercial services, and public safety operations); and personnel training, qualifications, and certification. Of that total, 40 gaps/recommendations have been identified as high priority, 17 as medium priority, and 3 as low priority. A “gap” means no published standard or specification exists that covers the particular issue in question. In 36 cases, additional R&D is needed. The hope is that the roadmap will be broadly adopted by the standards community and that it will facilitate a more coherent and coordinated approach to the future development of standards for UAS. To that end, it is envisioned that the roadmap will be widely promoted and discussed over the course of the coming year, to assess progress on its implementation and to identify emerging issues that require further elaboration