Optical Fibers for Space-Division Multiplexed Transmission and Networking

Single-mode fiber transmission can no longer satisfy exponentially growing capacity demand. Space-division multiplexing (SDM) appears to be the only way able to dramatically improve the transmission capacity, for which, novel optical fiber is one of the key technologies. Such fibers must possess the following characteristics: 1) high mode density per cross-sectional area and 2) low crosstalk or low modal differential group delay (DMGD) to reduce complexity of digital signal processing. In this dissertation, we explore the design and characterization of three kinds of fibers for SDM: few-mode fiber (FMF), few-mode multi-core fiber (FM-MCF) and coupled multi-core fiber (CMCF) as well as their applications in transmission and networking. For the ultra-high density need of SDM, we have proposed the FMMCF. It combines advantages of both the FMF and MCF. The challenge is the inter-core crosstalk of the high-order modes. By applying a hole-assisted structure and careful fiber design, the LP11 crosstalk has been suppressed down to -40dB per km. This allows separate transmission on LP01 and LP11 modes without penalty. In fact, a robust SDM transmission up to 200Tb/s has been achieved using this fiber. To overcome distributed modal crosstalk in conjunction with DMGD, supermodes in CMCFs have been proposed. The properties of supermodes were investigated using the coupled-mode theory. The immediate benefits include high mode density and large effective area. In supermode structures, core-to-core coupling is exploited to reduce modal crosstalk or minimize DMGD. In addition, higher-order supermodes have been discovered in CMCFs with few-mode cores. We show that higher-order supermodes in different waveguide array configurations can be strongly affected by angle-dependent couplings, leading to different modal fields. Analytical solutions are provided for linear, rectangular and ring arrays. Higher-order modes have been observed for the first time using S2 imaging method. Finally, we introduce FMF to gigabit-capable passive optical networks (GPON). By replacing the conventional splitter with a photonic lantern, upstream combining loss can be eliminated. Low crosstalk has been achieved by a customized mode-selective photonic lantern carefully coupled to the FMF. We have demonstrated the first few-mode GPON system with error-free performance over 20-km 3-mode transmission using a commercial GPON system carrying live Ethernet traffic. We then scale the 3-mode GPON system to 5-mode, which resulted in a 4dB net gain in power budget in comparison with current commercial single-mode GPON systems

Specialty Fiber Lasers and Novel Fiber Devices

At the Dawn of the 21st century, the field of specialty optical fibers experienced a scientific revolution with the introduction of the stack-and-draw technique, a multi-steps and advanced fiber fabrication method, which enabled the creation of well-controlled micro-structured designs. Since then, an extremely wide variety of finely tuned fiber structures have been demonstrated including novel materials and novel designs. As the complexity of the fiber design increased, highly-controlled fabrication processes became critical. To determine the ability of a novel fiber design to deliver light with properties tailored according to a specific application, several mode analysis techniques were reported, addressing the recurring needs for in-depth fiber characterization. The first part of this dissertation details a novel experiment that was demonstrated to achieve modal decomposition with extended capabilities, reaching beyond the limits set by the existing mode analysis techniques. As a result, individual transverse modes carrying between ~0.01% and ~30% of the total light were resolved with unmatched accuracy. Furthermore, this approach was employed to decompose the light guided in Large-Mode Area (LMA) fiber, Photonic Crystal Fiber (PCF) and Leakage Channel Fiber (LCF). The single-mode performances were evaluated and compared. As a result, the suitability of each specialty fiber design to be implemented for power-scaling applications of fiber laser systems was experimentally determined. The second part of this dissertation is dedicated to novel specialty fiber laser systems. First, challenges related to the monolithic integration of novel and complex specialty fiber designs in all-fiber systems were addressed. The poor design and size compatibility between specialty fibers and conventional fiber-based components limits their monolithic integration due to high coupling loss and unstable performances. Here, novel all-fiber Mode-Field Adapter (MFA) devices made of selected segments of Graded Index Multimode Fiber (GIMF) were implemented to mitigate the coupling losses between a LMA PCF and a conventional Single-Mode Fiber (SMF), presenting an initial 18-fold mode-field area mismatch. It was experimentally demonstrated that the overall transmission in the mode-matched fiber chain was increased by more than 11 dB (the MFA was a 250 ?m piece of 50 ?m core diameter GIMF). This approach was further employed to assemble monolithic fiber laser cavities combining an active LMA PCF and fiber Bragg gratings (FBG) in conventional SMF. It was demonstrated that intra-cavity mode-matching results in an efficient (60%) and narrow-linewidth (200 pm) laser emission at the FBG wavelength. In the last section of this dissertation, monolithic Multi-Core Fiber (MCF) laser cavities were reported for the first time. Compared to existing MCF lasers, renown for high-brightness beam delivery after selection of the in-phase supermode, the present new generation of 7-coupled-cores Yb-doped fiber laser uses the gain from several supermodes simultaneously. In order to uncover mode competition mechanisms during amplification and the complex dynamics of multi-supermode lasing, novel diagnostic approaches were demonstrated. After characterizing the laser behavior, the first observations of self-mode-locking in linear MCF laser cavities were discovered

The Photonic Lantern

Photonic lanterns are made by adiabatically merging several single-mode cores into one multimode core. They provide low-loss interfaces between single-mode and multimode systems where the precise optical mapping between cores and individual modes is unimportant.Comment: 45 pages; article unchanged, accepted for publication in Advances in Optics and Photonic

Room-Temperature Power-Stabilized Narrow-Linewidth Tunable Erbium-Doped Fiber Ring Laser Based on Cascaded Mach-Zehnder Interferometers with Different Free Spectral Range for Strain Sensing

An automatically power-stabilized (with power fluctuation <0.155 dB), narrow-linewidth (0.0171 nm), wavelength-tunable (10.69 nm) erbium-doped fiber laser has been proposed by cascading two fiber Mach-Zehnder interferometers (MZI) without using any temperature controlling device. One of the MZIs (here called the 1st MZI) is composed of two 3 dB couplers to form interference patterns while the other MZI (here termed the 2nd MZI) is constructed with a tapered seven-core fiber (SCF) and based on the principle of supermode interference. For the two MZIs, the free spectral range (FSR), the passband bandwidth and the extinction ratio (ER) at 1560 nm are 0.37 nm, 0.19 nm, 16.6 dB and 13.93 nm, 7.93 nm, 10.1 dB, respectively. Due to the major difference between the two FSR values, the 1st MZI and the 2nd MZI respectively play a role in controlling the laser linewidth and suppressing the homogeneous broadening effect to reach to a satisfactory level of power stability. The 2nd MZI is also used to fine tune the laser wavelength by applying strain to the tapered SCF (TSCF) over the spectral range of 1570.22-1559.33 nm, with an incremental step of 0.37 nm being used. The side-mode suppression ratio (SMSR) of the tunable fiber laser can be up to 45 dB. By appropriately adjusting the polarization controller, dual wavelength lasing can also be achieved. For single wavelength lasing, the 3 dB laser linewidth is 0.0171 nm. The power fluctuation, without a temperature controlling device being used and operating at room temperature, is found to be less than 0.155 dB over 1 hour while the central wavelength drift is less than 0.19 nm

Mode-resolved gain analysis and lasing in multi-supermode multi-core fiber laser

Multi-core fibers (MCFs) with coupled-cores are attractive large-mode area (LMA) specialty fiber designs that support the propagation of a few transverse modes often called supermodes (SMs). Compared to other LMA fibers, the uniqueness of MCF arises from the higher degrees of design space offered by a multitude of core-array geometries, resulting in extended flexibility to tailor SM properties. To date, the use of MCF as gain media has focused on lasers that operate in only one selected SM, typically the lowest order in-phase SM, which considerably limited the potential of these multi-core structures. Here, we expand the potential of MCF lasers by investigating multi-SM amplification and lasing schemes. Amplifier and laser systems using a 7 coupled-cores Yb-doped MCF as gain medium were successfully designed and assembled. Individual SM could be decomposed using the correlation filter technique mode analysis and the modal amplification factors (gamma(i)) were recorded. With access to amplification characteristics of individual transverse modes, a monolithic MCF laser was demonstrated that operates simultaneously on the two SMs carrying the highest optical gain

Sensing using Specialty Optical Fibers

Fiber optic based sensing is a growing field with many applications in civil and aerospace engineering, oil and gas industries, and particularly in harsh environments where electronics are not able to function. Optical fibers can be easily integrated into structures, are immune to electromagnetic interference, can be interrogated from remote distances, and can be multiplexed for distributed measurements. Because of these properties, specialty fiber designs and devices are being explored for sensing temperature, strain, pressure, curvature, refractive index, and more. Here we show a detailed analysis of a multicore fiber (MCF) for sensing, including its design and optimization in simulation, as well as experimental operation when used as sensor. The multicore fiber sensor\u27s performance as a function of temperature, strain, bending, and acoustic waves are all explored. The MCF sensors are shown to be able to withstand temperatures up to 1000°C, making them suitable to be harsh environment sensors. Additionally, a simple method for increasing the sensitivity of the MCF to longitudinal force is shown to multiple the sensitivity of the MCF sensor by a factor of seven. Also, a configuration for decoupling force and temperature will be presented. Finally, a developing all-fiber device, a photonic lantern, will be shown in conjunction with the MCF in order to increase sensitivity, add directional sensitivity, and lower the cost of the sensor interrogation for bending measurements. In addition to the multicore fiber, an analysis of anti-resonant hollow core fiber (ARHCF) is also presented. The fibers\u27 design-dependent propagation losses are explored, as well as their higher order mode content. Also, a potential application of an ARHCF for an in-fiber Raman air sensor is introduced, and the design optimization in simulation is shown

Simultaneous Sensing of Refractive Index and Temperature With Supermode Interference

[EN]In general, a sensor is used to monitor a single parameter only, and in many cases, a reference sensor is necessary to compensate the effect of temperature. Here, we demonstrate that a single supermode interferometer is capable of monitoring two parameters simultaneously. Said interferometer was fabricated with a segment of strongly coupled multicore fiber fusion spliced at the end of a standard single mode fiber. The free end of the multicore fiber was flat, thus, it behaved as a low reflectivity mirror whose reflection depended on the external refractive index. The reflection spectrum of our supermode interferometer consisted of well-defined periodic maxima and minima whose values and position varied when the interferometer was exposed to refractive index and temperature changes. In the Fourier domain, the changes of the interference pattern can be decoded easily. We demonstrate that the supermode interferometer here proposed can be useful to measure the thermo-optic coefficient of a sample. An important advantage of the device reported here is that the length of the multicore fiber is not determinant on the performance of the sensor. In addition, the device can be reused multiple times.This work was supported in part by the Ministerio de Economia y Competitividad (Spain) and the European Regional Development Fund under Grants PGC2018-101997-B-I00 and RTI2018-094669-B-C31, and in part by the Departamento de Educacion del GobiernoVasco, underGrant IT933-16

Coupled two-core integrated waveguides modal analysis

We present a modal analysis of coupled two-core integrated waveguides fabricated by femtosecond laser writing as a function of the core-to-core distance, illuminating position and input light wavelength. In order to do that we use the correlation filter method, implementing the computer generated holograms in a phase-only spatial light modulator. Due to the two-core waveguide symmetry, we prove it is not necessary to encode the complex amplitude in a phase-only device as long as the cores are not strongly coupled. A comparison between experimental and numerical modal weights is presented, showing that simple phase-only match filters allow the modal decomposition of two-core waveguides output beams

Mode attraction, rejection and control in nonlinear multimode optics

Novel fundamental notions helping in the interpretation of the complex dynamics of nonlinear systems are essential to our understanding and ability to exploit them. In this work we predict and demonstrate experimentally a fundamental property of Kerr-nonlinear media, which we name mode rejection and takes place when two intense counter-propagating beams interact in a multimode waveguide. In stark contrast to mode attraction phenomena, mode rejection leads to the selective suppression of a spatial mode in the forward beam, which is controlled via the counter-propagating backward beam. Starting from this observation we generalise the ideas of attraction and rejection in nonlinear multimode systems of arbitrary dimension, which paves the way towards a more general idea of all-optical mode control. These ideas represent universal tools to explore novel dynamics and applications in a variety of optical and non-optical nonlinear systems. Coherent beam combination in polarization-maintaining multicore fibres is demonstrated as example