379 research outputs found
Mobile Edge Computing for Future Internet-of-Things
University of Technology Sydney. Faculty of Engineering and Information Technology.Integrating sensors, the Internet, and wireless systems, Internet-of-Things (IoT) provides a new paradigm of ubiquitous connectivity and pervasive intelligence. The key enabling technology underlying IoT is mobile edge computing (MEC), which is anticipated to realize and reap the promising benefits of IoT applications by placing various cloud resources, such as computing and storage resources closer to smart devices and objects. Challenges of designing efficient and scalable MEC platforms for future IoT arise from the physical limitations of computing and battery resources of IoT devices, heterogeneity of computing and wireless communication capabilities of IoT networks, large volume of data arrivals and massive number connections, and large-scale data storage and delivery across the edge network. To address these challenges, this thesis proposes four efficient and scalable task offloading and cooperative caching approaches are proposed.
Firstly, for the multi-user single-cell MEC scenario, the base station (BS) can only have outdated knowledge of IoT device channel conditions due to the time-varying nature of practical wireless channels. To this end, a hybrid learning approach is proposed to optimize the real-time local processing and predictive computation offloading decisions in a distributed manner.
Secondly, for the multi-user multi-cell MEC scenario, an energy-efficient resource management approach is developed based on distributed online learning to tackle the heterogeneity of computing and wireless transmission capabilities of edge servers and IoT devices. The proposed approach optimizes the decisions on task offloading, processing, and result delivery between edge servers and IoT devices to minimize the time-average energy consumption of MEC.
Thirdly, for the computing resource allocation under large-scale network, a distributed online collaborative computing approach is proposed based on Lyapunov optimization for data analysis in IoT application to minimize the time-average energy consumption of network.
Finally, for the storage resource allocation under large-scale network, a distributed IoT data delivery approach based on online learning is proposed for caching application in mobile applications. A new profitable cooperative region is established for every IoT data request admitted at an edge server, to avoid invalid request dispatching
NFV orchestration in edge and fog scenarios
Mención Internacional en el título de doctorLas infraestructuras de red actuales soportan una
variedad diversa de servicios como video bajo demanda,
video conferencias, redes sociales, sistemas
de educación, o servicios de almacenamiento de
fotografías. Gran parte de la población mundial ha
comenzado a utilizar estos servicios, y los utilizan
diariamente. Proveedores de Cloud y operadores
de infraestructuras de red albergan el tráfico de
red generado por estos servicios, y sus tareas de
gestión no solo implican realizar el enrutamiento
del tráfico, sino también el procesado del tráfico de
servicios de red. Tradicionalmente, el procesado
del tráfico ha sido realizado mediante aplicaciones/
programas desplegados en servidores que estaban
dedicados en exclusiva a tareas concretas
como la inspección de paquetes. Sin embargo, en
los últimos anos los servicios de red se han virtualizado
y esto ha dado lugar al paradigma de
virtualización de funciones de red (Network Function
Virtualization (NFV) siguiendo las siglas en
ingles), en el que las funciones de red de un servicio
se ejecutan en contenedores o máquinas virtuales
desacopladas de la infraestructura hardware. Como
resultado, el procesado de tráfico se ha ido
haciendo más flexible gracias al laxo acople del
software y hardware, y a la posibilidad de compartir
funciones de red típicas, como firewalls, entre
los distintos servicios de red.
NFV facilita la automatización de operaciones
de red, ya que tareas como el escalado, o la migración
son típicamente llevadas a cabo mediante
un conjunto de comandos previamente definidos
por la tecnología de virtualización pertinente, bien
mediante contenedores o máquinas virtuales. De
todos modos, sigue siendo necesario decidir el en rutamiento y procesado del tráfico de cada servicio
de red. En otras palabras, que servidores tienen
que encargarse del procesado del tráfico, y que
enlaces de la red tienen que utilizarse para que las
peticiones de los usuarios lleguen a los servidores
finales, es decir, el conocido como embedding problem.
Bajo el paraguas del paradigma NFV, a este
problema se le conoce en inglés como Virtual Network
Embedding (VNE), y esta tesis utiliza el termino
“NFV orchestration algorithm” para referirse
a los algoritmos que resuelven este problema. El
problema del VNE es NP-hard, lo cual significa
que que es imposible encontrar una solución optima
en un tiempo polinómico, independientemente
del tamaño de la red. Como consecuencia, la comunidad
investigadora y de telecomunicaciones
utilizan heurísticos que encuentran soluciones de
manera más rápida que productos para la resolución
de problemas de optimización.
Tradicionalmente, los “NFV orchestration algorithms”
han intentado minimizar los costes de
despliegue derivados de las soluciones asociadas.
Por ejemplo, estos algoritmos intentan no consumir
el ancho de banda de la red, y usar rutas cortas
para no utilizar tantos recursos. Además, una tendencia
reciente ha llevado a la comunidad investigadora
a utilizar algoritmos que minimizan el
consumo energético de los servicios desplegados,
bien mediante la elección de dispositivos con un
consumo energético más eficiente, o mediante el
apagado de dispositivos de red en desuso. Típicamente,
las restricciones de los problemas de VNE se
han resumido en un conjunto de restricciones asociadas
al uso de recursos y consumo energético, y las
soluciones se diferenciaban por la función objetivo
utilizada. Pero eso era antes de la 5a generación de
redes móviles (5G) se considerase en el problema
de VNE. Con la aparición del 5G, nuevos servicios
de red y casos de uso entraron en escena. Los estándares
hablaban de comunicaciones ultra rápidas
y fiables (Ultra-Reliable and Low Latency Communications
(URLLC) usando las siglas en inglés) con
latencias por debajo de unos pocos milisegundos y
fiabilidades del 99.999%, una banda ancha mejorada
(enhanced Mobile Broadband (eMBB) usando
las siglas en inglés) con notorios incrementos en
el flujo de datos, e incluso la consideración de comunicaciones
masivas entre maquinas (Massive
Machine-Type Communications (mMTC) usando
las siglas en inglés) entre dispositivos IoT. Es más,
paradigmas como edge y fog computing se incorporaron a la tecnología 5G, e introducían la idea
de tener dispositivos de computo más cercanos al
usuario final. Como resultado, el problema del VNE
tenía que incorporar los nuevos requisitos como
restricciones a tener en cuenta, y toda solución
debía satisfacer bajas latencias, alta fiabilidad, y
mayores tasas de transmisión.
Esta tesis estudia el problema des VNE, y propone
algunos heurísticos que lidian con las restricciones
asociadas a servicios 5G en escenarios
edge y fog, es decir, las soluciones propuestas se
encargan de asignar funciones virtuales de red a
servidores, y deciden el enrutamiento del trafico
en las infraestructuras 5G con dispositivos edge y
fog. Para evaluar el rendimiento de las soluciones
propuestas, esta tesis estudia en primer lugar la
generación de grafos que representan redes 5G.
Los mecanismos propuestos para la generación de
grafos sirven para representar distintos escenarios
5G. En particular, escenarios de federación en
los que varios dominios comparten recursos entre
ellos. Los grafos generados también representan
servidores en el edge, así como dispositivos fog con
una batería limitada. Además, estos grafos tienen
en cuenta los requisitos de estándares, y la demanda
que se espera en las redes 5G. La generación de
grafos propuesta sirve para representar escenarios
federación en los que varios dominios comparten
recursos entre ellos, y redes 5G con servidores edge,
así como dispositivos fog estáticos o móviles con
una batería limitada. Los grafos generados para
infraestructuras 5G tienen en cuenta los requisitos
de estándares, y la demanda de red que se espera
en las redes 5G. Además, los grafos son diferentes
en función de la densidad de población, y el área
de estudio, es decir, si es una zona industrial, una
autopista, o una zona urbana.
Tras detallar la generación de grafos que representan
redes 5G, esta tesis propone algoritmos de
orquestación NFV para resolver con el problema
del VNE. Primero, se centra en escenarios federados
en los que los servicios de red se tienen que
asignar no solo a la infraestructura de un dominio,
sino a los recursos compartidos en la federación
de dominios. Dos problemas diferentes han sido estudiados,
uno es el problema del VNE propiamente
dicho sobre una infraestructura federada, y el otro
es la delegación de servicios de red. Es decir, si
un servicio de red se debe desplegar localmente
en un dominio, o en los recursos compartidos por
la federación de dominios; a sabiendas de que el último caso supone el pago de cuotas por parte del
dominio local a cambio del despliegue del servicio
de red. En segundo lugar, esta tesis propone
OKpi, un algoritmo de orquestación NFV para conseguir
la calidad de servicio de las distintas slices
de las redes 5G. Conceptualmente, el slicing consiste
en partir la red de modo que cada servicio
de red sea tratado de modo diferente dependiendo
del trozo al que pertenezca. Por ejemplo, una
slice de eHealth reservara los recursos de red necesarios
para conseguir bajas latencias en servicios
como operaciones quirúrgicas realizadas de manera
remota. Cada trozo (slice) está destinado a
unos servicios específicos con unos requisitos muy
concretos, como alta fiabilidad, restricciones de
localización, o latencias de un milisegundo. OKpi
es un algoritmo de orquestación NFV que consigue
satisfacer los requisitos de servicios de red en los
distintos trozos, o slices de la red. Tras presentar
OKpi, la tesis resuelve el problema del VNE en redes
5G con dispositivos fog estáticos y móviles. El
algoritmo de orquestación NFV presentado tiene
en cuenta las limitaciones de recursos de computo
de los dispositivos fog, además de los problemas
de falta de cobertura derivados de la movilidad de
los dispositivos.
Para concluir, esta tesis estudia el escalado
de servicios vehiculares Vehicle-to-Network (V2N),
que requieren de bajas latencias para servicios como
la prevención de choques, avisos de posibles
riesgos, y conducción remota. Para estos servicios,
los atascos y congestiones en la carretera pueden
causar el incumplimiento de los requisitos de latencia.
Por tanto, es necesario anticiparse a esas
circunstancias usando técnicas de series temporales
que permiten saber el tráfico inminente en los
siguientes minutos u horas, para así poder escalar
el servicio V2N adecuadamente.Current network infrastructures handle a diverse
range of network services such as video
on demand services, video-conferences, social
networks, educational systems, or photo
storage services. These services have been
embraced by a significant amount of the
world population, and are used on a daily basis.
Cloud providers and Network operators’
infrastructures accommodate the traffic rates
that the aforementioned services generate, and
their management tasks do not only involve
the traffic steering, but also the processing of
the network services’ traffic. Traditionally,
the traffic processing has been assessed via
applications/programs deployed on servers
that were exclusively dedicated to a specific
task as packet inspection. However, in recent
years network services have stated to be
virtualized and this has led to the Network
Function Virtualization (Network Function
Virtualization (NFV)) paradigm, in which the
network functions of a service run on containers
or virtual machines that are decoupled
from the hardware infrastructure. As a result,
the traffic processing has become more flexible
because of the loose coupling between
software and hardware, and the possibility
of sharing common network functions, as
firewalls, across multiple network services.
NFV eases the automation of network operations,
since scaling and migrations tasks
are typically performed by a set of commands
predefined by the virtualization technology,
either containers or virtual machines. However,
it is still necessary to decide the traffic steering and processing of every network
service. In other words, which servers will
hold the traffic processing, and which are the
network links to be traversed so the users’ requests
reach the final servers, i.e., the network
embedding problem. Under the umbrella of
NFV, this problem is known as Virtual Network
Embedding (VNE), and this thesis refers
as “NFV orchestration algorithms” to those
algorithms solving such a problem. The VNE
problem is a NP-hard, meaning that it is impossible
to find optimal solutions in polynomial
time, no matter the network size. As a
consequence, the research and telecommunications
community rely on heuristics that find
solutions quicker than a commodity optimization
solver.
Traditionally, NFV orchestration algorithms
have tried to minimize the deployment
costs derived from their solutions. For example,
they try to not exhaust the network
bandwidth, and use short paths to use less
network resources. Additionally, a recent
tendency led the research community towards
algorithms that minimize the energy consumption
of the deployed services, either
by selecting more energy efficient devices
or by turning off those network devices that
remained unused. VNE problem constraints
were typically summarized in a set of resources/energy constraints, and the solutions
differed on which objectives functions were
aimed for. But that was before 5th generation
of mobile networks (5G) were considered
in the VNE problem. With the appearance
of 5G, new network services and use cases
started to emerge. The standards talked about
Ultra Reliable Low Latency Communication
(Ultra-Reliable and Low Latency Communications
(URLLC)) with latencies below few
milliseconds and 99.999% reliability, an enhanced
mobile broadband (enhanced Mobile
Broadband (eMBB)) with significant data
rate increases, and even the consideration
of massive machine-type communications
(Massive Machine-Type Communications
(mMTC)) among Internet of Things (IoT) devices.
Moreover, paradigms such as edge and
fog computing blended with the 5G technology
to introduce the idea of having computing
devices closer to the end users. As a result, the VNE problem had to incorporate the new
requirements as constraints to be taken into
account, and every solution should either
satisfy low latencies, high reliability, or larger
data rates.
This thesis studies the VNE problem, and
proposes some heuristics tackling the constraints
related to 5G services in Edge and
fog scenarios, that is, the proposed solutions
assess the assignment of Virtual Network
Functions to resources, and the traffic steering
across 5G infrastructures that have Edge and
Fog devices. To evaluate the performance
of the proposed solutions, the thesis studies
first the generation of graphs that represent
5G networks. The proposed mechanisms to
generate graphs serve to represent diverse 5G
scenarios. In particular federation scenarios
in which several domains share resources
among themselves. The generated graphs
also represent edge servers, so as fog devices
with limited battery capacity. Additionally,
these graphs take into account the standard
requirements, and the expected demand for
5G networks. Moreover, the graphs differ depending
on the density of population, and the
area of study, i.e., whether it is an industrial
area, a highway, or an urban area.
After detailing the generation of graphs
representing the 5G networks, this thesis proposes
several NFV orchestration algorithms
to tackle the VNE problem. First, it focuses
on federation scenarios in which network services
should be assigned not only to a single
domain infrastructure, but also to the shared
resources of the federation of domains. Two
different problems are studied, one being the
VNE itself over a federated infrastructure, and
the other the delegation of network services.
That is, whether a network service should be
deployed in a local domain, or in the pool
of resources of the federation domain; knowing
that the latter charges the local domain
for hosting the network service. Second, the
thesis proposes OKpi, a NFV orchestration
algorithm to meet 5G network slices quality
of service. Conceptually, network slicing consists
in splitting the network so network services
are treated differently based on the slice
they belong to. For example, an eHealth network
slice will allocate the network resources necessary to meet low latencies for network
services such as remote surgery. Each network
slice is devoted to specific services with
very concrete requirements, as high reliability,
location constraints, or 1ms latencies. OKpi is
a NFV orchestration algorithm that meets the
network service requirements among different
slices. It is based on a multi-constrained
shortest path heuristic, and its solutions satisfy
latency, reliability, and location constraints.
After presenting OKpi, the thesis tackles the
VNE problem in 5G networks with static/moving
fog devices. The presented NFV orchestration
algorithm takes into account the limited
computing resources of fog devices, as well
as the out-of-coverage problems derived from
the devices’ mobility.
To conclude, this thesis studies the scaling
of Vehicle-to-Network (V2N) services, which
require low latencies for network services as
collision avoidance, hazard warning, and remote
driving. For these services, the presence
of traffic jams, or high vehicular traffic congestion
lead to the violation of latency requirements.
Hence, it is necessary to anticipate to
such circumstances by using time-series techniques
that allow to derive the incoming vehicular
traffic flow in the next minutes or hours,
so as to scale the V2N service accordingly.The 5G Exchange (5GEx) project (2015-2018) was an EU-funded project (H2020-ICT-2014-2 grant agreement 671636).
The 5G-TRANSFORMER project (2017-2019) is an EU-funded project (H2020-ICT-2016-2 grant agreement 761536).
The 5G-CORAL project (2017-2019) is an EU-Taiwan project (H2020-ICT-2016-2 grant agreement 761586).Programa de Doctorado en Ingeniería Telemática por la Universidad Carlos III de MadridPresidente: Ioannis Stavrakakis.- Secretario: Pablo Serrano Yáñez-Mingot.- Vocal: Paul Horatiu Patra
Cyber–Physical–Social Frameworks for Urban Big Data Systems: A Survey
The integration of things’ data on the Web and Web linking for things’ description and discovery is leading the way towards smart Cyber–Physical Systems (CPS). The data generated in CPS represents observations gathered by sensor devices about the ambient environment that can be manipulated by computational processes of the cyber world. Alongside this, the growing use of social networks offers near real-time citizen sensing capabilities as a complementary information source. The resulting Cyber–Physical–Social System (CPSS) can help to understand the real world and provide proactive services to users. The nature of CPSS data brings new requirements and challenges to different stages of data manipulation, including identification of data sources, processing and fusion of different types and scales of data. To gain an understanding of the existing methods and techniques which can be useful for a data-oriented CPSS implementation, this paper presents a survey of the existing research and commercial solutions. We define a conceptual framework for a data-oriented CPSS and detail the various solutions for building human–machine intelligence
ULTRA-FAST AND MEMORY-EFFICIENT LOOKUPS FOR CLOUD, NETWORKED SYSTEMS, AND MASSIVE DATA MANAGEMENT
Systems that process big data (e.g., high-traffic networks and large-scale storage) prefer data structures and algorithms with small memory and fast processing speed. Efficient and fast algorithms play an essential role in system design, despite the improvement of hardware. This dissertation is organized around a novel algorithm called Othello Hashing. Othello Hashing supports ultra-fast and memory-efficient key-value lookup, and it fits the requirements of the core algorithms of many large-scale systems and big data applications. Using Othello hashing, combined with domain expertise in cloud, computer networks, big data, and bioinformatics, I developed the following applications that resolve several major challenges in the area.
Concise: Forwarding Information Base. A Forwarding Information Base is a data structure used by the data plane of a forwarding device to determine the proper forwarding actions for packets. The polymorphic property of Othello Hashing the separation of its query and control functionalities, which is a perfect match to the programmable networks such as Software Defined Networks. Using Othello Hashing, we built a fast and scalable FIB named \textit{Concise}. Extensive evaluation results on three different platforms show that Concise outperforms other FIB designs.
SDLB: Cloud Load Balancer. In a cloud network, the layer-4 load balancer servers is a device that acts as a reverse proxy and distributes network or application traffic across a number of servers. We built a software load balancer with Othello Hashing techniques named SDLB. SDLB is able to accomplish two functionalities of the SDLB using one Othello query: to find the designated server for packets of ongoing sessions and to distribute new or session-free packets.
MetaOthello: Taxonomic Classification of Metagenomic Sequences. Metagenomic read classification is a critical step in the identification and quantification of microbial species sampled by high-throughput sequencing. Due to the growing popularity of metagenomic data in both basic science and clinical applications, as well as the increasing volume of data being generated, efficient and accurate algorithms are in high demand. We built a system to support efficient classification of taxonomic sequences using its k-mer signatures.
SeqOthello: RNA-seq Sequence Search Engine. Advances in the study of functional genomics produced a vast supply of RNA-seq datasets. However, how to quickly query and extract information from sequencing resources remains a challenging problem and has been the bottleneck for the broader dissemination of sequencing efforts. The challenge resides in both the sheer volume of the data and its nature of unstructured representation. Using the Othello Hashing techniques, we built the SeqOthello sequence search engine. SeqOthello is a reference-free, alignment-free, and parameter-free sequence search system that supports arbitrary sequence query against large collections of RNA-seq experiments, which enables large-scale integrative studies using sequence-level data
Selected Papers from the 5th International Electronic Conference on Sensors and Applications
This Special Issue comprises selected papers from the proceedings of the 5th International Electronic Conference on Sensors and Applications, held on 15–30 November 2018, on sciforum.net, an online platform for hosting scholarly e-conferences and discussion groups. In this 5th edition of the electronic conference, contributors were invited to provide papers and presentations from the field of sensors and applications at large, resulting in a wide variety of excellent submissions and topic areas. Papers which attracted the most interest on the web or that provided a particularly innovative contribution were selected for publication in this collection. These peer-reviewed papers are published with the aim of rapid and wide dissemination of research results, developments, and applications. We hope this conference series will grow rapidly in the future and become recognized as a new way and venue by which to (electronically) present new developments related to the field of sensors and their applications
IoT and Sensor Networks in Industry and Society
The exponential progress of Information and Communication Technology (ICT) is one of the main elements that fueled the acceleration of the globalization pace. Internet of Things (IoT), Artificial Intelligence (AI) and big data analytics are some of the key players of the digital transformation that is affecting every aspect of human's daily life, from environmental monitoring to healthcare systems, from production processes to social interactions. In less than 20 years, people's everyday life has been revolutionized, and concepts such as Smart Home, Smart Grid and Smart City have become familiar also to non-technical users.
The integration of embedded systems, ubiquitous Internet access, and Machine-to-Machine (M2M) communications have paved the way for paradigms such as IoT and Cyber Physical Systems (CPS) to be also introduced in high-requirement environments such as those related to industrial processes, under the forms of Industrial Internet of Things (IIoT or I2oT) and Cyber-Physical Production Systems (CPPS). As a consequence, in 2011 the German High-Tech Strategy 2020 Action Plan for Germany first envisioned the concept of Industry 4.0, which is rapidly reshaping traditional industrial processes. The term refers to the promise to be the fourth industrial revolution. Indeed, the first industrial revolution was triggered by water and steam power. Electricity and assembly lines enabled mass production in the second industrial revolution. In the third industrial revolution, the introduction of control automation and Programmable Logic Controllers (PLCs) gave a boost to factory production. As opposed to the previous revolutions, Industry 4.0 takes advantage of Internet access, M2M communications, and deep learning not only to improve production efficiency but also to enable the so-called mass customization, i.e. the mass production of personalized products by means of modularized product design and flexible processes.
Less than five years later, in January 2016, the Japanese 5th Science and Technology Basic Plan took a further step by introducing the concept of Super Smart Society or Society 5.0. According to this vision, in the upcoming future, scientific and technological innovation will guide our society into the next social revolution after the hunter-gatherer, agrarian, industrial, and information eras, which respectively represented the previous social revolutions. Society 5.0 is a human-centered society that fosters the simultaneous achievement of economic, environmental and social objectives, to ensure a high quality of life to all citizens. This information-enabled revolution aims to tackle today’s major challenges such as an ageing population, social inequalities, depopulation and constraints related to energy and the environment. Accordingly, the citizens will be experiencing impressive transformations into every aspect of their daily lives.
This book offers an insight into the key technologies that are going to shape the future of industry and society. It is subdivided into five parts: the I Part presents a horizontal view of the main enabling technologies, whereas the II-V Parts offer a vertical perspective on four different environments.
The I Part, dedicated to IoT and Sensor Network architectures, encompasses three Chapters. In Chapter 1, Peruzzi and Pozzebon analyse the literature on the subject of energy harvesting solutions for IoT monitoring systems and architectures based on Low-Power Wireless Area Networks (LPWAN). The Chapter does not limit the discussion to Long Range Wise Area Network (LoRaWAN), SigFox and Narrowband-IoT (NB-IoT) communication protocols, but it also includes other relevant solutions such as DASH7 and Long Term Evolution MAchine Type Communication (LTE-M). In Chapter 2, Hussein et al. discuss the development of an Internet of Things message protocol that supports multi-topic messaging. The Chapter further presents the implementation of a platform, which integrates the proposed communication protocol, based on Real Time Operating System. In Chapter 3, Li et al. investigate the heterogeneous task scheduling problem for data-intensive scenarios, to reduce the global task execution time, and consequently reducing data centers' energy consumption. The proposed approach aims to maximize the efficiency by comparing the cost between remote task execution and data migration.
The II Part is dedicated to Industry 4.0, and includes two Chapters. In Chapter 4, Grecuccio et al. propose a solution to integrate IoT devices by leveraging a blockchain-enabled gateway based on Ethereum, so that they do not need to rely on centralized intermediaries and third-party services.
As it is better explained in the paper, where the performance is evaluated in a food-chain traceability application, this solution is particularly beneficial in Industry 4.0 domains. Chapter 5, by De Fazio et al., addresses the issue of safety in workplaces by presenting a smart garment that integrates several low-power sensors to monitor environmental and biophysical parameters. This enables the detection of dangerous situations, so as to prevent or at least reduce the consequences of workers accidents.
The III Part is made of two Chapters based on the topic of Smart Buildings. In Chapter 6, Petroșanu et al. review the literature about recent developments in the smart building sector, related to the use of supervised and unsupervised machine learning models of sensory data. The Chapter poses particular attention on enhanced sensing, energy efficiency, and optimal building management. In Chapter 7, Oh examines how much the education of prosumers about their energy consumption habits affects power consumption reduction and encourages energy conservation, sustainable living, and behavioral change, in residential environments. In this Chapter, energy consumption monitoring is made possible thanks to the use of smart plugs.
Smart Transport is the subject of the IV Part, including three Chapters. In Chapter 8, Roveri et al. propose an approach that leverages the small world theory to control swarms of vehicles connected through Vehicle-to-Vehicle (V2V) communication protocols. Indeed, considering a queue dominated by short-range car-following dynamics, the Chapter demonstrates that safety and security are increased by the introduction of a few selected random long-range communications. In Chapter 9, Nitti et al. present a real time system to observe and analyze public transport passengers' mobility by tracking them throughout their journey on public transport vehicles. The system is based on the detection of the active Wi-Fi interfaces, through the analysis of Wi-Fi probe requests. In Chapter 10, Miler et al. discuss the development of a tool for the analysis and comparison of efficiency indicated by the integrated IT systems in the operational activities undertaken by Road Transport Enterprises (RTEs). The authors of this Chapter further provide a holistic evaluation of efficiency of telematics systems in RTE operational management.
The book ends with the two Chapters of the V Part on Smart Environmental Monitoring. In Chapter 11, He et al. propose a Sea Surface Temperature Prediction (SSTP) model based on time-series similarity measure, multiple pattern learning and parameter optimization. In this strategy, the optimal parameters are determined by means of an improved Particle Swarm Optimization method. In Chapter 12, Tsipis et al. present a low-cost, WSN-based IoT system that seamlessly embeds a three-layered cloud/fog computing architecture, suitable for facilitating smart agricultural applications, especially those related to wildfire monitoring.
We wish to thank all the authors that contributed to this book for their efforts. We express our gratitude to all reviewers for the volunteering support and precious feedback during the review process. We hope that this book provides valuable information and spurs meaningful discussion among researchers, engineers, businesspeople, and other experts about the role of new technologies into industry and society
Preserving Edge Knowledge Sharing Among IoT Services: A Blockchain-Based Approach
Edge computational intelligence, integrating artificial intelligence (AI) and edge computing into Internet of Things (IoT), will generate many scattered knowledge. To enable auditable and delay-sensitive IoT services, these knowledge will be shared among decentralized intelligent network edges (DINEs), end users, and supervisors frequently. Blockchain has a promising ability to provide a traceable, privacy-preserving and tamper-resistant ledger for sharing edge knowledge. However, due to the complicated environments of network edges, knowledge sharing among DINEs still faces many challenges. Firstly, the resource limitation and mobility of DINEs impede the applicability of existing consensus tricks (e.g., Poof of Work, Proof of Stake, and Paxos) of blockchain. Secondly, the adversaries may eavesdrop the content of edge knowledge or entice the blockchain to forks using some attacking models (like man-in-the-middle attack, denial of services, etc.). In this article, an user-centric blockchain (UCB) framework is proposed for preserving edge knowledge sharing in IoT. Significant superiorities of UCB benefit from the proof of popularity (PoP) consensus mechanism, which is more energy-efficient and fast. Security analysis and experiments based on Raspberry Pi 3 Model B demonstrate its feasibility with low block generating delay and complexity
- …