A self-mixing laser sensor design with an extended kalman filter for optimal online structure analysis and damping evaluation

We have developed a new algorithm based on the extended Kalman filter, in order to improve the resolution of an optical displacement sensor. This new non contact sensor which provides vibration measurement with a very good accuracy might be used for online quality control by measuring the damping of excited mechanical structure. This self-mixing sensor subject to weak feedback has been tested in comparison with a commercial vibrometer, to measure the frequency response function of a plate with a passive damping to be characterized, in order to show the efficiency of a damping treatment

Research and Application of Measurement System Base on Laser Self-Mixing Interference

激光自混合干涉效应是指由于外部物体反射或者散射，而导致光反馈回激光腔内引起光功率波动的现象。该技术不仅保证了传统干涉的测量精度，还具备单光路、结构紧凑、易准直等优点，解决了传统干涉中存在的问题，因此受到了研究人员的关注，被广泛应用于速度、位移和振动、生物医学等领域的测量。 本文介绍了激光自混合干涉效应的发展历程和研究现状。通过三种不同的数学模型，详细阐述了自混合效应的机理，并对自混合干涉系统进行数值仿真，进而分析研究了系统模型中各参数对自混合干涉信号的影响。在此基础上，搭建半导体激光器自混合干涉测量系统，通过观察和研究实验现象，验证了理论仿真的结果。此外，本文还根据自混合基本数学模型，研究了...As a new laser technique called, self-mixing interference (SMI), which is based on the interaction of cavity field with the field backscatter from the remote target, has increasingly garnered intense attention. The SMI has advantages of simple and compact system structure and easy collimated light path. Therefore, the applications of the SMI have been popularized in many fields, including metrolog...学位：工学硕士院系专业：信息科学与技术学院_光学工程学号：2312013115309

Self-Mixing Diode Laser Interferometry

Self-mixing interferometry in a laser diode is a very powerful tool in measurement science. The Self-mixing interferometer is a very robust and low cost interferometer with extreme simplicity in alignment and setup. In this thesis, a self-mixing interferometer is analysed and developed. The measurements of the self-mixing interferometer are verified using a Michelson interferometer. It is then followed by the signal processing of the detected signal. Three different methods are developed to retrieve the movement of the target. Results obtained by applying these methods to different experimental data sets are presented. In the later part of the thesis, a phase locked self-mixing interferometer is developed. This slightly modified interferometer follows the target movement. As a result no additional circuitry or signal processing is necessary for the recovery of the target movement. Phase locked interferometer developed in this thesis was able to measure down to 1 nm of vibration. It is then followed by a novel method to detect cracks in eggshells using the phase locked vibrometer. The proposed method is tested and proved to be capable of differentiating between the intact and cracked eggs

Frequency-Modulated Optical Feedback Interferometry for Nanometric Scale Vibrometry

We demonstrate a novel method that makes an efficient use of laser nonlinear dynamics when subject to optical self-injection for subwavelength displacement sensing purposes. The proposed methodology combines two different phenomena taking place inside the laser cavity: optical self-injection, which results in optical feedback interference, and laser continuous wave frequency modulation, giving rise to a wavelength sweeping effect in the laser's emission. We present a combination of these phenomena to measure vibration amplitudes below lambda/2 with the resolutions of a few nanometers, bandwidth dependent upon the distance of external target, amplitude, and frequency of current modulation. The basic theoretical details and a mathematical model are presented for the developed measurement principle. Experimental results with the system working as a vibrometer to measure a target vibration of amplitude lambda/5 (137.5 nm) with a mean peak-to-peak error of 2.4 nm just by pointing the laser diode onto the target and applying some signal processing are also demonstrated.Postprint (author's final draft

Evaluation of Self-Mixing Interferometry Performance in the Measurement of Ablation Depth

This paper studies self-mixing interferometry (SMI) for measuring ablation depth during laser percussion drilling of TiAlN ceramic coating. The measurement performance of SMI was investigated in a large processing range producing blind microholes with depths below and beyond the average coating thickness. Signal characteristics of the measurement system were evaluated indicating sources of disturbance. The SMI measurements were compared with a conventional measurement device based on focus variation microscopy to evaluate the measurement error. The measurement error classes were defined, as well as defining the related error sources. The results depict that the measurement error was independent of the processing condition, hence the hole geometry and ablation rate. For 76% of cases, measurement error was below the intrinsic device resolution obtainable by simple fringe counting of half a wavelength (λ/2 = 0.393 μm)

Versatile Multimodality Imaging System Based on Detectorless and Scanless Optical Feedback Interferometry-A Retrospective Overview for A Prospective Vision

In this retrospective compendium, we attempt to draw a "fil rouge" along fifteen years of our research in the field of optical feedback interferometry aimed at guiding the readers to the verge of new developments in the field. The general reader will be moved at appreciating the versatility and the still largely uncovered potential of the optical feedback interferometry, for both sensing and imaging applications. By discovering the broad range of available wavelengths (0.4-120 μm), the different types of suitable semiconductor lasers (Fabry-Perot, distributed feedback, vertical-cavity, quantum-cascade), and a number of unconventional tenders in multi-axis displacement, ablation front progression, self-referenced measurements, multispectral, structured light feedback imaging and compressive sensing, the specialist also could find inspirational suggestions to expand his field of research

Frequency-domain method for measuring alpha factor by self-mixing interferometry

Linewidth enhancement factor, also known as the alpha factor, is a fundamental characteristic parameter of a laser diode (LD). It characterises the broadening of the laser linewidth, the frequency chirp, the injection lock range and the response to external optical feedback. In the past few decades, extensive researches have been dedicated to the measurement of alpha. Among all the existing approaches, the methods based on selfmixing interferometry (SMI) are considered the most simple and effective. The core components of a SMI consist of an LD, a lens and a moving target. When a portion of laser light backscattered or reflected by the external target and re-enters the laser cavity, a modulated lasing field will be generated. The modulated laser power is also called SMI signal, which carries the information of target movement and LD related parameters, including alpha

Semiconductor laser dynamics induced by optical feedback for photonic microwave sensing

As one of the most widely used light sources today, semiconductor lasers (SLs) are an important part of many optical systems, especially for sensing, communications, metrology, and storage applications. SLs have the advantages of small size, easy integration, and miniaturization. The massification of electronic devices has furthered this agenda, allowing the creation of portable systems capable of supporting optical sensing systems. Essentially, SLs are inherently nonlinear devices, in nonlinear systems, the folding and stretching behaviors of variables result in di↵erent dynamical routes. It is worth noting that under the conditions of a stable operation, an SL biased by constant current usually emits laser light with a constant intensity. However, with the introduction of external optical feedback (OF), the laser light can become unstable. SL will undergo from steady state, switching status, to period-one (P1) oscillation by crossing Hopf-bifurcation. In the P1 state, the system produces a modulation of the laser optical output power for the generation of microwave photonics (MWP) signals. In this thesis, we operate SL with OF scheme in P1 dynamics, and found that the proposed system has the great capability to achieve both displacement and absolute distance sensing applications with high resolution and wide measurement range, by using time-frequency information, relaxation oscillation information, and nonlinear dynamic characteristics carried in that SLs emit signals. The contributions of each chapter in this thesis are described in the following: In Chapter 3, we propose an SL with OF set at the P1 dynamics to generate the MWP signal for displacement sensing. Di↵erent from the traditional MWP generation method, the designed laser nonlinear dynamics are used by slightly perturbing the SL source with the help of external feedback light to make the system work in the P1 dynamic state, thereby generating regular microwave oscillation. By using the fourth-order Runge-Kutta method to numerically solve the famous Lang-Kobayashi differential equation, the boundary of di↵erent laser dynamic states is delimited, so that the system can generate stable and sustainable MWP signals in P1 dynamics. A set of parameter selection rules for designing an SL based MWP displacement sensing system is obtained. In addition, a measurement algorithm for recovering the displacement from an MWP sensing signal is developed. By making full use of the sensing information carried in both amplitude and frequency of the MWP signal, displacement sensing with high resolution and high sensitivity can be achieved. Both simulations and experiments are conducted to verify the proposed method and show it is capable of realizing high measurement sensitivity, and high resolution for displacement sensing. In Chapter 4, utilizing the rich nonlinear dynamics of an SL with OF, under the proper controllable system parameters, the system enters the P1 dynamics through Hopf-bifurcation. In the P1 state, the detailed relationship between the relaxation oscillation frequency of MWP signals and external cavity length is studied through solving the Lang-Kobayashi delayed di↵erential equations. The displacement measurement formula is thus obtained. In addition, the relevant signal processing algorithm is developed by considering mode-hopping, frequency-hopping, and sawtooth-like phenomena that occurred in the relaxation oscillation. The displacement measurement can be enhanced in a wider sensing range by fully using the relaxation oscillation frequency relationship. Verification results in simulation and experiment show that the proposed MWP displacement sensing system based on SL with OF contributes to designing a prototype of a compact displacement sensor with wide measurement range and high resolution. In Chapter 5, OF induced switching status between two nonlinear dynamic states (stable and P1 states) is observed in the SL with OF system. Without the need for any electronic or optical modulation devices, the laser intensity can be modulated in a square wave form due to the switching via utilizing the inherent SL dynamics near Hopf-bifurcation boundary. The periodicity in the switching enables us to develop a new approach for long-distance sensing compared to other SL with OF based absolute distance measurement systems and lift the relevant restrictions that existed in the systems. Moreover, the impact of system controllable parameters on the duty cycle of the square wave signals generated was investigated as well, aiming to maintain the proposed system robustly operating at the switching status

Versatile multimodality imaging system based on detectorless and scanless optical feedback interferometry—a retrospective overview for a prospective vision

In this retrospective compendium, we attempt to draw a “fil rouge” along fifteen years of our research in the field of optical feedback interferometry aimed at guiding the readers to the verge of new developments in the field. The general reader will be moved at appreciating the versatility and the still largely uncovered potential of the optical feedback interferometry, for both sensing and imaging applications. By discovering the broad range of available wavelengths (0.4–120 μm), the different types of suitable semiconductor lasers (Fabry–Perot, distributed feedback, vertical-cavity, quantum-cascade), and a number of unconventional tenders in multi-axis displacement, ablation front progression, self-referenced measurements, multispectral, structured light feedback imaging and compressive sensing, the specialist also could find inspirational suggestions to expand his field of research