The application of a new PID autotuning method for the steam/water loop in large scale ships

In large scale ships, the most used controllers for the steam/water loop are still the proportional-integral-derivative (PID) controllers. However, the tuning rules for the PID parameters are based on empirical knowledge and the performance for the loops is not satisfying. In order to improve the control performance of the steam/water loop, the application of a recently developed PID autotuning method is studied. Firstly, a 'forbidden region' on the Nyquist plane can be obtained based on user-defined performance requirements such as robustness or gain margin and phase margin. Secondly, the dynamic of the system can be obtained with a sine test around the operation point. Finally, the PID controller's parameters can be obtained by locating the frequency response of the controlled system at the edge of the 'forbidden region'. To verify the effectiveness of the new PID autotuning method, comparisons are presented with other PID autotuning methods, as well as the model predictive control. The results show the superiority of the new PID autotuning method

Distributed model predictive control of steam/water loop in large scale ships

In modern steam power plants, the ever-increasing complexity requires great reliability and flexibility of the control system. Hence, in this paper, the feasibility of a distributed model predictive control (DiMPC) strategy with an extended prediction self-adaptive control (EPSAC) framework is studied, in which the multiple controllers allow each sub-loop to have its own requirement flexibility. Meanwhile, the model predictive control can guarantee a good performance for the system with constraints. The performance is compared against a decentralized model predictive control (DeMPC) and a centralized model predictive control (CMPC). In order to improve the computing speed, a multiple objective model predictive control (MOMPC) is proposed. For the stability of the control system, the convergence of the DiMPC is discussed. Simulation tests are performed on the five different sub-loops of steam/water loop. The results indicate that the DiMPC may achieve similar performance as CMPC while outperforming the DeMPC method

Effect of control horizon in model predictive control for steam/water loop in large-scale ships

This paper presents an extensive analysis of the properties of different control horizon sets in an Extended Prediction Self-Adaptive Control (EPSAC) model predictive control framework. Analysis is performed on the linear multivariable model of the steam/water loop in large-scale watercraft/ships. The results indicate that larger control horizon values lead to better loop performance, at the cost of computational complexity. Hence, it is necessary to find a good trade-off between the performance of the system and allocated or available computational complexity. In this original work, this problem is explicitly treated as an optimization task, leading to the optimal control horizon sets for the steam/water loop example. Based on simulation results, it is concluded that specific tuning of control horizons outperforms the case when only a single valued control horizon is used for all the loops

Advances in Condition Monitoring, Optimization and Control for Complex Industrial Processes

The book documents 25 papers collected from the Special Issue “Advances in Condition Monitoring, Optimization and Control for Complex Industrial Processes”, highlighting recent research trends in complex industrial processes. The book aims to stimulate the research field and be of benefit to readers from both academic institutes and industrial sectors

Robust nonlinear adaptive backstepping controller design for power system applications including renewable energy systems

This thesis has developed robust nonlinear backstepping and adaptive backstepping controllers for power networks. Comprehensive control solutions are provided for conventional and modern power generation systems including DC microgrids. One of the excellent features of these controllers is the robustness against parameter uncertainties and measurement noises

The 1st International Conference on Computational Engineering and Intelligent Systems

Computational engineering, artificial intelligence and smart systems constitute a hot multidisciplinary topic contrasting computer science, engineering and applied mathematics that created a variety of fascinating intelligent systems. Computational engineering encloses fundamental engineering and science blended with the advanced knowledge of mathematics, algorithms and computer languages. It is concerned with the modeling and simulation of complex systems and data processing methods. Computing and artificial intelligence lead to smart systems that are advanced machines designed to fulfill certain specifications. This proceedings book is a collection of papers presented at the first International Conference on Computational Engineering and Intelligent Systems (ICCEIS2021), held online in the period December 10-12, 2021. The collection offers a wide scope of engineering topics, including smart grids, intelligent control, artificial intelligence, optimization, microelectronics and telecommunication systems. The contributions included in this book are of high quality, present details concerning the topics in a succinct way, and can be used as excellent reference and support for readers regarding the field of computational engineering, artificial intelligence and smart system

Robust model-based fault estimation and fault-tolerant control : towards an integration

To maintain robustly acceptable system performance, fault estimation (FE) is adopted to reconstruct fault signals and a fault-tolerant control (FTC) controller is employed to compensate for the fault effects. The inevitably existing system and estimation uncertainties result in the so-called bi-directional robustness interactions defined in this work between the FE and FTC functions, which gives rise to an important and challenging yet open integrated FE/FTC design problem concerned in this thesis. An example of fault-tolerant wind turbine pitch control is provided as a practical motivation for integrated FE/FTC design.To achieve the integrated FE/FTC design for linear systems, two strategies are proposed. A H∞ optimization based approach is first proposed for linear systems with differentiable matched faults, using augmented state unknown input observer FE and adaptive sliding mode FTC. The integrated design is converted into an observer-based robust control problem solved via a single-step linear matrix inequality formulation.With the purpose of an integrated design with more freedom and also applicable for a range of general fault scenarios, a decoupling approach is further proposed. This approach can estimate and compensate unmatched non-differentiable faults and perturbations by combined adaptive sliding mode augmented state unknown input observer and backstepping FTC controller. The observer structure renders a recovery of the Separation Principle and allows great freedom for the FE/FTC designs.Integrated FE/FTC design strategies are also developed for Takagi-Sugeno fuzzy modelling nonlinear systems, Lipschitz nonlinear systems, and large-scale interconnected systems, based on extensions of the H∞ optimization approach for linear systems.Tutorial examples are used to illustrate the design strategies for each approach. Physical systems, a 3-DOF (degree-of-freedom) helicopter and a 3-machine power system, are used to provide further evaluation of the proposed integrated FE/FTC strategies. Future research on this subject is also outlined

Advances in Fluid Power Systems

The main purpose of this Special Issue of “Advances in Fluid Power Systems” was to present new scientific work in the field of fluid power systems for hydraulic and pneumatic control of machines and devices used in various industries. Advances in fluid power systems are leading to the creation of new smart devices that can replace tried-and-true solutions from the past. The development work of authors from various research centres has been published. This Special Issue focuses on recent advances and smart solutions for fluid power systems in a wide range of topics, including: • Fluid power for IoT and Industry 4.0: smart fluid power technology, wireless 5G connectivity in fluid power, smart components, and sensors.• Fluid power in the renewable energy sector: hydraulic drivetrains for wind power and for wave and marine current power, and hydraulic systems for solar power. • Hybrid fluid power: hybrid transmissions, energy recovery and accumulation, and energy efficiency of hybrid drives.• Industrial and mobile fluid power: industrial fluid power solutions, mobile fluid power solutions, eand nergy efficiency solutions for fluid power systems.• Environmental aspects of fluid power: hydraulic water control technology, noise and vibration of fluid power components, safety, reliability, fault analysis, and diagnosis of fluid power systems.• Fluid power and mechatronic systems: servo-drive control systems, fluid power drives in manipulators and robots, and fluid power in autonomous solutions

Stability Studies Of Fuzzy Logic Based Power System Stabilizer In Enhancing Dynamic Stability Of A Two Generators Tie-Line System

Electro-mechanical oscillations are created, in the machines of an interrelated power network, followed by a trouble or due to high power transfer through weak tie lines. These oscillations should be damped as quickly as possible to guarantee the reliable and stable operation of the network. This research presents the analysis of change of speed, change of angle position and tie - line power flow, fuzzy logic controller (FLC) two area symmetrical systems connected via tieline are measured to show via performance of these controllers using Simulink/MATLAB. Simulation results described by fuzzy logic based controller having dual inputs of rotor speed deviation and generator’s accelerating power there shown better solutions for damping the inter area (tie-line) oscillations