A MPC Strategy for the Optimal Management of Microgrids Based on Evolutionary Optimization

In this paper, a novel model predictive control strategy, with a 24-h prediction horizon, is proposed to reduce the operational cost of microgrids. To overcome the complexity of the optimization problems arising from the operation of the microgrid at each step, an adaptive evolutionary strategy with a satisfactory trade-off between exploration and exploitation capabilities was added to the model predictive control. The proposed strategy was evaluated using a representative microgrid that includes a wind turbine, a photovoltaic plant, a microturbine, a diesel engine, and an energy storage system. The achieved results demonstrate the validity of the proposed approach, outperforming a global scheduling planner-based on a genetic algorithm by 14.2% in terms of operational cost. In addition, the proposed approach also better manages the use of the energy storage system.Ministerio de Economía y Competitividad DPI2016-75294-C2-2-RUnión Europea (Programa Horizonte 2020) 76409

Model predictive control of water quality in drinking water distribution systems considering disinfection by-products

The shortage in water resources have been observed all over the world. However, the safety of drinking water has been given much attention by scientists because the disinfection will react with organic matters in drinking water to generate disinfection by-products (DBPs) which are considered as the cancerigenic matters. Although much research has been carried out on the water quality control problem in DWDS, the water quality model considered is linear with only chlorine dynamics. Compared to the linear water quality model, the nonlinear water quality model considers the interaction between chlorine and DBPs dynamics. The thesis proposes a nonlinear model predictive controller which utilises the newly derived nonlinear water quality model as a control alternative for controlling water quality. EPANET and EPANET-MSN are simulators utilised for modelling in the developed nonlinear MPC controller. Uncertainty is not considered in these simulators. This thesis proposes the bounded PPM in a form of multi-input multi-output to robustly bound parameters of chlorine and DBPs jointly and to robustly predict water quality control outputs for quality control purpose. The methodologies and algorithms developed in this thesis are verified by applying extended case studies to the example DWDS. The simulation results are presented and critically analysed

Cyber-Physical Systems for Smart Water Networks: A Review

There is a growing demand to equip Smart Water Networks (SWN) with advanced sensing and computation capabilities in order to detect anomalies and apply autonomous event-triggered control. Cyber-Physical Systems (CPSs) have emerged as an important research area capable of intelligently sensing the state of SWN and reacting autonomously in scenarios of unexpected crisis development. Through computational algorithms, CPSs can integrate physical components of SWN, such as sensors and actuators, and provide technological frameworks for data analytics, pertinent decision making, and control. The development of CPSs in SWN requires the collaboration of diverse scientific disciplines such as civil, hydraulics, electronics, environment, computer science, optimization, communication, and control theory. For efficient and successful deployment of CPS in SWN, there is a need for a common methodology in terms of design approaches that can involve various scientific disciplines. This paper reviews the state of the art, challenges, and opportunities for CPSs, that could be explored to design the intelligent sensing, communication, and control capabilities of CPS for SWN. In addition, we look at the challenges and solutions in developing a computational framework from the perspectives of machine learning, optimization, and control theory for SWN.acceptedVersio

Robust adaptive model predictive control for intelligent drinking water distribution systems

Large-scale complex systems have large numbers of variables, network structure of interconnected subsystems, nonlinearity, spatial distribution with several time scales in its dynamics, uncertainties and constrained. Decomposition of large-scale complex systems into smaller more manageable subsystems allowed for implementing distributed control and coordinations mechanisms. This thesis proposed the use of distributed softly switched robustly feasible model predictive controllers (DSSRFMPC) for the control of large-scale complex systems. Each DSSRFMPC is made up of reconfigurable robustly feasible model predictive controllers (RRFMPC) to adapt to different operational states or fault scenarios of the plant. RRFMPC reconfiguration to adapt to different operational states of the plant is achieved using the soft switching method between the RRFMPC controllers. The RRFMPC is designed by utilizing the off-line safety zones and the robustly feasible invariant sets in the state space which are established off-line using Karush Kuhn Tucker conditions. This is used to achieve robust feasibility and recursive feasibility for the RRFMPC under different operational states of the plant. The feasible adaptive cooperation among DSSRFMPC agents under different operational states are proposed. The proposed methodology is verified by applying it to a simulated benchmark drinking water distribution systems (DWDS) water quality control

Hydrolink 2017/4. Multi Reservoir Systems Operations

Topic: Multi Reservoir Systems Operation

Jätevedenpuhdistamojen prosessinohjauksen ja operoinnin kehittäminen data-analytiikan avulla: esimerkkejä teollisuudesta ja kansainvälisiltä puhdistamoilta

Instrumentation, control and automation are central for operation of municipal wastewater treatment plants. Treatment performance can be further improved and secured by processing and analyzing the collected process and equipment data. New challenges from resource efficiency, climate change and aging infrastructure increase the demand for understanding and controlling plant-wide interactions. This study aims to review what needs, barriers, incentives and opportunities Finnish wastewater treatment plants have for developing current process control and operation systems with data analytics. The study is conducted through interviews, thematic analysis and case studies of real-life applications in process industries and international utilities. Results indicate that for many utilities, additional measures for quality assurance of instruments, equipment and controllers are necessary before advanced control strategies can be applied. Readily available data could be used to improve the operational reliability of the process. 14 case studies of advanced data processing, analysis and visualization methods used in Finnish and international wastewater treatment plants as well as Finnish process industries are reviewed. Examples include process optimization and quality assurance solutions that have proven benefits in operational use. Applicability of these solutions for identified development needs is initially evaluated. Some of the examples are estimated to have direct potential for application in Finnish WWTPs. For other case studies, further piloting or research efforts to assess the feasibility and cost-benefits for WWTPs are suggested. As plant operation becomes more centralized and outsourced in the future, need for applying data analytics is expected to increase.Prosessinohjaus- ja automaatiojärjestelmillä on keskeinen rooli modernien jätevedenpuhdistamojen operoinnissa. Prosessi- ja laitetietoa paremmin hyödyntämällä prosessia voidaan ohjata entistä tehokkaammin ja luotettavammin. Kiertotalous, ilmastonmuutos ja infrastruktuurin ikääntyminen korostavat entisestään tarvetta ymmärtää ja ohjata myös eri osaprosessien välisiä vuorovaikutuksia. Tässä työssä tarkastellaan tarpeita, esteitä, kannustimia ja mahdollisuuksia kehittää jätevedenpuhdistamojen ohjausta ja operointia data-analytiikan avulla. Eri sidosryhmien näkemyksiä kartoitetaan haastatteluilla, joiden tuloksia käsitellään temaattisen analyysin kautta. Löydösten perusteella potentiaalisia ratkaisuja kartoitetaan suomalaisten ja kansainvälisten puhdistamojen sekä prosessiteollisuuden jo käyttämistä sovelluksista. Löydökset osoittavat, että monilla puhdistamoilla tarvitaan nykyistä merkittävästi kattavampia menetelmiä instrumentoinnin, laitteiston ja ohjauksen laadunvarmistukseen, ennen kuin edistyneempien prosessinohjausmenetelmien käyttöönotto on mahdollista. Operoinnin toimintavarmuutta ja luotettavuutta voitaisiin kehittää monin tavoin hyödyntämällä jo kerättyä prosessi- ja laitetietoa. Työssä esitellään yhteensä 14 esimerkkiä puhdistamoilla ja prosessiteollisuudessa käytössä olevista prosessinohjaus- ja laadunvarmistusmenetelmistä. Osalla ratkaisuista arvioidaan sellaisenaan olevan laajaa sovelluspotentiaalia suomalaisilla jätevedenpuhdistamoilla. Useiden ratkaisujen käyttöönottoa voitaisiin edistää pilotoinnilla tai jatkotutkimuksella potentiaalisten hyötyjen ja kustannusten arvioimiseksi. Jo kerättyä prosessi- ja laitetietoa hyödyntävien ratkaisujen kysynnän odotetaan tulevaisuudessa lisääntyvän, kun puhdistamojen operointi keskittyy ja paineet kustannus- ja energiatehokkuudelle kasvavat