High-Performance Integrated Window and Façade Solutions for California

The researchers developed a new generation of high-performance façade systems and supporting design and management tools to support industry in meeting California’s greenhouse gas reduction targets, reduce energy consumption, and enable an adaptable response to minimize real-time demands on the electricity grid. The project resulted in five outcomes: (1) The research team developed an R-5, 1-inch thick, triplepane, insulating glass unit with a novel low-conductance aluminum frame. This technology can help significantly reduce residential cooling and heating loads, particularly during the evening. (2) The team developed a prototype of a windowintegrated local ventilation and energy recovery device that provides clean, dry fresh air through the façade with minimal energy requirements. (3) A daylight-redirecting louver system was prototyped to redirect sunlight 15–40 feet from the window. Simulations estimated that lighting energy use could be reduced by 35–54 percent without glare. (4) A control system incorporating physics-based equations and a mathematical solver was prototyped and field tested to demonstrate feasibility. Simulations estimated that total electricity costs could be reduced by 9-28 percent on sunny summer days through adaptive control of operable shading and daylighting components and the thermostat compared to state-of-the-art automatic façade controls in commercial building perimeter zones. (5) Supporting models and tools needed by industry for technology R&D and market transformation activities were validated. Attaining California’s clean energy goals require making a fundamental shift from today’s ad-hoc assemblages of static components to turnkey, intelligent, responsive, integrated building façade systems. These systems offered significant reductions in energy use, peak demand, and operating cost in California

Dynamic Illumination for Augmented Reality with Real-Time Interaction

Current augmented and mixed reality systems suffer a lack of correct illumination modeling where the virtual objects render the same lighting condition as the real environment. While we are experiencing astonishing results from the entertainment industry in multiple media forms, the procedure is mostly accomplished offline. The illumination information extracted from the physical scene is used to interactively render the virtual objects which results in a more realistic output in real-time. In this paper, we present a method that detects the physical illumination with dynamic scene, then uses the extracted illumination to render the virtual objects added to the scene. The method has three steps that are assumed to be working concurrently in real-time. The first is the estimation of the direct illumination (incident light) from the physical scene using computer vision techniques through a 360° live-feed camera connected to AR device. The second is the simulation of indirect illumination (reflected light) from the real-world surfaces to virtual objects rendering using region capture of 2D texture from the AR camera view. The third is defining the virtual objects with proper lighting and shadowing characteristics using shader language through multiple passes. Finally, we tested our work with multiple lighting conditions to evaluate the accuracy of results based on the shadow falling from the virtual objects which should be consistent with the shadow falling from the real objects with a reduced performance cost

Energy use in Urban Transport sector within the Sustainable Energy Action Plans (SEAPs) of three Italian Big Cities

Promising Renewable Energy solutions could be installed in cities, but they require specific morphological conditions as well as architectural integration. Transport sector is still neglected from a strong policy initiative. A first attempt along with a defined framework to attract economic resources as well as interested stakeholders is the Covenant of Mayors (CoM). Within this agreement, the Municipality has to design a plan, the so-called Sustainable Energy Action Plan (SEAP). The plan must contain a clear outline of the strategy and relative actions to be taken by the local authority to reach its commitments in 2020, in terms of sustainability goals set by EU 20-20-20. The aim of this paper is to discuss and evaluate the differences of fuel usage and transport sector interaction in Italian urban scenarios, taking into account geographical and morphological constraints, and to compare the forecasts for 2020 and 2030scenarios, in accordance with European and National laws in force

Ground-based hyperspectral analysis of the urban nightscape

Airborne hyperspectral cameras provide the basic information to estimate the energy wasted skywards by outdoor lighting systems, as well as to locate and identify their sources. However, a complete characterization of the urban light pollution levels also requires evaluating these effects from the city dwellers standpoint, e.g. the energy waste associated to the excessive illuminance on walls and pavements, light trespass, or the luminance distributions causing potential glare, to mention but a few. On the other hand, the spectral irradiance at the entrance of the human eye is the primary input to evaluate the possible health effects associated with the exposure to artificial light at night, according to the more recent models available in the literature. In this work we demonstrate the possibility of using a hyperspectral imager (routinely used in airborne campaigns) to measure the ground-level spectral radiance of the urban nightscape and to retrieve several magnitudes of interest for light pollution studies. We also present the preliminary results from a field campaign carried out in the downtown of Barcelona.Postprint (author's final draft

Energy planning for metropolitan context: potential and perspectives of sustainable energy action plans (seaps) of three italian big cities

Energy retrofitting of existing building stock and new expansion of urban settlements entail a new relationship between consumption and production sites. Especially, new production facilities linked to the renewables boom are not taken into account by the urban governance. Energy planning instruments could be the viable tool to manage the new energy transition focusing on territorial resources. The Sustainable Energy Action Plan is the most common and widespread due to its voluntary nature. The study analysed the SEAPs of three big Italian Cities to assess an integrated framework for planning renewables at the metropolitan scale

Human-centric light sensing and estimation from RGBD images: the invisible light switch

Lighting design in indoor environments is of primary importance for at least two reasons: 1) people should perceive an adequate light; 2) an effective lighting design means consistent energy saving. We present the Invisible Light Switch (ILS) to address both aspects. ILS dynamically adjusts the room illumination level to save energy while maintaining constant the light level perception of the users. So the energy saving is invisible to them. Our proposed ILS leverages a radiosity model to estimate the light level which is perceived by a person within an indoor environment, taking into account the person position and her/his viewing frustum (head pose). ILS may therefore dim those luminaires, which are not seen by the user, resulting in an effective energy saving, especially in large open offices (where light may otherwise be ON everywhere for a single person). To quantify the system performance, we have collected a new dataset where people wear luxmeter devices while working in office rooms. The luxmeters measure the amount of light (in Lux) reaching the people gaze, which we consider a proxy to their illumination level perception. Our initial results are promising: in a room with 8 LED luminaires, the energy consumption in a day may be reduced from 18585 to 6206 watts with ILS (currently needing 1560 watts for operations). While doing so, the drop in perceived lighting decreases by just 200 lux, a value considered negligible when the original illumination level is above 1200 lux, as is normally the case in offices

Human-centric light sensing and estimation from RGBD images: The invisible light switch

Lighting design in indoor environments is of primary importance for at least two reasons: 1) people should perceive an adequate light; 2) an effective lighting design means consistent energy saving. We present the Invisible Light Switch (ILS) to address both aspects. ILS dynamically adjusts the room illumination level to save energy while maintaining constant the light level perception of the users. So the energy saving is invisible to them. Our proposed ILS leverages a radiosity model to estimate the light level which is perceived by a person within an indoor environment, taking into account the person position and her/his viewing frustum (head pose). ILS may therefore dim those luminaires, which are not seen by the user, resulting in an effective energy saving, especially in large open offices (where light may otherwise be ON everywhere for a single person). To quantify the system performance, we have collected a new dataset where people wear luxmeter devices while working in office rooms. The luxmeters measure the amount of light (in Lux) reaching the people gaze, which we consider a proxy to their illumination level perception. Our initial results are promising: in a room with 8 LED luminaires, the energy consumption in a day may be reduced from 18585 to 6206 watts with ILS (currently needing 1560 watts for operations). While doing so, the drop in perceived lighting decreases by just 200 lux, a value considered negligible when the original illumination level is above 1200 lux, as is normally the case in offices

Climate based facade design for business buildings with examples from central London

There is a disconnection between commercial architecture and environmental thinking, where green features can be included as part of a strategy for gaining approvals and marketing projects, but those features are not reviewed after completion and occupation of the building and knowledge is not shared. High levels of air conditioning are still considered unavoidable. Elaborate double skin façades and complex motorized shading systems are adopted; often masking an underlying lack of basic environmental thinking. This article returns (in principle) to the physics of comfort in buildings and the passive strategies which can help achieve this with a low energy and carbon footprint. Passive and active façade design strategies are outlined as the basis of a critical tool and a design methodology for new projects. A new architectural sensibility can arise based on modeling the inputs of sunlight, daylight and air temperature in time and space at the early stages of design. Early but sound strategies can be tested and refined using advanced environmental modeling techniques. Architecture and environmental thinking can proceed hand in hand through the design process

Enabling low-carbon living in new UK housing developments

Purpose: The purpose of this paper is to describe a tool (the Climate Challenge Tool) that allows house builders to calculate whole life carbon equivalent emissions and costs of various carbon and energy reduction options that can be incorporated into the design of new developments. Design/methodology/approach: The tool covers technical and soft (or lifestyle) measures for reducing carbon production and energy use. Energy used within the home, energy embodied in the building materials, and emissions generated through transport, food consumption and waste treatment are taken into account. The tool has been used to assess the potential and cost-effectiveness of various carbon reduction options for a proposed new housing development in Cambridgeshire. These are compared with carbon emissions from a typical UK household. Findings: The tool demonstrated that carbon emission reductions can be achieved at much lower costs through an approach which enables sustainable lifestyles than through an approach which focuses purely on reducing heat lost through the fabric of the building and from improving the heating and lighting systems. Practical implications: The tool will enable house builders to evaluate which are the most cost-effective measures that they can incorporate into the design of new developments in order to achieve the significant energy savings and reduction in carbon emissions necessary to meet UK Government targets and to avoid dangerous climate change. Originality/value: Current approaches to assessing carbon and energy reduction options for new housing developments concentrate on energy efficiency options such as reducing heat lost through the fabric of the building and improving the heating and lighting systems, alongside renewable energy systems. The Climate Challenge Tool expands the range of options that might be considered by developers to include those affecting lifestyle choices of future residents. © Emerald Group Publishing Limited