5,486 research outputs found
Coverage Protocols for Wireless Sensor Networks: Review and Future Directions
The coverage problem in wireless sensor networks (WSNs) can be generally
defined as a measure of how effectively a network field is monitored by its
sensor nodes. This problem has attracted a lot of interest over the years and
as a result, many coverage protocols were proposed. In this survey, we first
propose a taxonomy for classifying coverage protocols in WSNs. Then, we
classify the coverage protocols into three categories (i.e. coverage aware
deployment protocols, sleep scheduling protocols for flat networks, and
cluster-based sleep scheduling protocols) based on the network stage where the
coverage is optimized. For each category, relevant protocols are thoroughly
reviewed and classified based on the adopted coverage techniques. Finally, we
discuss open issues (and recommend future directions to resolve them)
associated with the design of realistic coverage protocols. Issues such as
realistic sensing models, realistic energy consumption models, realistic
connectivity models and sensor localization are covered
Robotic Wireless Sensor Networks
In this chapter, we present a literature survey of an emerging, cutting-edge,
and multi-disciplinary field of research at the intersection of Robotics and
Wireless Sensor Networks (WSN) which we refer to as Robotic Wireless Sensor
Networks (RWSN). We define a RWSN as an autonomous networked multi-robot system
that aims to achieve certain sensing goals while meeting and maintaining
certain communication performance requirements, through cooperative control,
learning and adaptation. While both of the component areas, i.e., Robotics and
WSN, are very well-known and well-explored, there exist a whole set of new
opportunities and research directions at the intersection of these two fields
which are relatively or even completely unexplored. One such example would be
the use of a set of robotic routers to set up a temporary communication path
between a sender and a receiver that uses the controlled mobility to the
advantage of packet routing. We find that there exist only a limited number of
articles to be directly categorized as RWSN related works whereas there exist a
range of articles in the robotics and the WSN literature that are also relevant
to this new field of research. To connect the dots, we first identify the core
problems and research trends related to RWSN such as connectivity,
localization, routing, and robust flow of information. Next, we classify the
existing research on RWSN as well as the relevant state-of-the-arts from
robotics and WSN community according to the problems and trends identified in
the first step. Lastly, we analyze what is missing in the existing literature,
and identify topics that require more research attention in the future
Optimisation of Mobile Communication Networks - OMCO NET
The mini conference “Optimisation of Mobile Communication Networks” focuses on advanced methods for search and optimisation applied to wireless communication networks. It is sponsored by Research & Enterprise Fund Southampton Solent University.
The conference strives to widen knowledge on advanced search methods capable of optimisation of wireless communications networks. The aim is to provide a forum for exchange of recent knowledge, new ideas and trends in this progressive and challenging area. The conference will popularise new successful approaches on resolving hard tasks such as minimisation of transmit power, cooperative and optimal routing
The Deployment in the Wireless Sensor Networks: Methodologies, Recent Works and Applications
International audienceThe wireless sensor networks (WSN) is a research area in continuous evolution with a variety of application contexts. Wireless sensor networks pose many optimization problems, particularly because sensors have limited capacity in terms of energy, processing and memory. The deployment of sensor nodes is a critical phase that significantly affects the functioning and performance of the network. Often, the sensors constituting the network cannot be accurately positioned, and are scattered erratically. To compensate the randomness character of their placement, a large number of sensors is typically deployed, which also helps to increase the fault tolerance of the network. In this paper, we are interested in studying the positioning and placement of sensor nodes in a WSN. First, we introduce the problem of deployment and then we present the latest research works about the different proposed methods to solve this problem. Finally, we mention some similar issues related to the deployment and some of its interesting applications
Towards Efficient Sensor Placement for Industrial Wireless Sensor Network
Industrial Wireless Sensor Network (IWSN) is the recent emergence in wireless technologies that facilitate industrial applications. IWSN constructs a reliable and self-responding industrial system using interconnected intelligent sensors. These sensors continuously monitor and analyze the industrial process to evoke its best performance. Since the sensors are resource-constrained and communicate wirelessly, the excess sensor placement utilizes more energy and also affects the environment. Thus, sensors need to use efficiently to minimize their network traffic and energy utilization. In this paper, we proposed a vertex coloring based optimal sensor placement to determine the minimal sensor requirement for an efficient network
Autonomous deployment and repair of a sensor network using an unmanned aerial vehicle
We describe a sensor network deployment method using autonomous flying robots. Such networks are suitable for tasks such as large-scale environmental monitoring or for command and control in emergency situations. We describe in detail the algorithms used for deployment and for measuring network connectivity and provide experimental data we collected from field trials. A particular focus is on determining gaps in connectivity of the deployed network and generating a plan for a second, repair, pass to complete the connectivity. This project is the result of a collaboration between three robotics labs (CSIRO, USC, and Dartmouth.)
Node placement optimization using extended virtual force and cuckoo search algorithm in wireless sensor network
Node placement is one of the fundamental issues that affects the performance of coverage and connectivity in Wireless Sensor Network (WSN). In a large scale WSN, sensor nodes are deployed randomly where they are scattered too close or far apart from each other. This random deployment causes issues such as coverage hole,
overlapping and connectivity failure that contributes to the performance of coverage and connectivity of WSN. Therefore, node placement model is develop to find the optimal node placement in order to maintain the coverage and guaranteed the connectivity in random deployment. The performance of Extended Virtual Force-Based Algorithm (EVFA) and Cuckoo Search (CS) algorithm are evaluated and EVFA shows the improvement of coverage area and exhibits a guaranteed connectivity compared to CS algorithm. Both algorithms have their own strength in improving the coverage performance. The EVFA approach can relocate the sensor
nodes using a repulsive and attractive force after initial deployment and CS algorithm is more efficient in exploring the search of maximum coverage area in random deployment. This study proposed Extended Virtual Force and Cuckoo Search (EVFCS) algorithm with a combination of EVFA and CS algorithm to find
an optimal node placement. A series of experimental studies on evaluation of proposed algorithm were conducted within simulated environment. In EVFCS, the algorithm searches the best value of threshold distance and relocated the new position of sensor nodes. The result suggested 18.212m is the best threshold distance that maximizes the coverage area. It also minimizes the problems of coverage hole
and overlapping while guaranteeing a reasonable connectivity quality. It proved that the proposed EVFCS outperforms the EVFA approach and achieved a significant improvement in coverage area and guaranteed connectivity. The implementation of the EVFCS improved the problems of initial random deployment
Implementation on Maximizing Network Topology Lifetime using Mobile Node Rotation
Wireless sensor network (WSN) is facing key challenges like extending network lifetime due to sensor nodes having limited power supplies. Extending WSN lifetime is complicated because nodes often experience differential power consumption. For example, nodes closer to the sink in a given routing topology transmit more data and thus consume power more rapidly than nodes farther from the sink. Inspired by the huddling behavior of emperor penguins where the penguins take turns on the cold extremities of a penguin �huddle�, we propose mobile node rotation, a new method for using low-cost mobile sensor nodes to address differential power consumption and extend WSN lifetime. Specifically, we propose to rotate the nodes through the high power consumption locations. We propose efficient algorithms for single and multiple rounds of rotations
- …