Superinductance and fluctuating two-level systems: Loss and noise in disordered and non-disordered superconducting quantum devices

In this thesis, we first demonstrate that a disordered superconductor with high kinetic inductance can realise a microwave low-loss, non-dissipative circuit element with impedance greater than the quantum resistance. This element, known as a superinductor, can suppress the fluctuations of charge in a quantum circuit.For this purpose, we fabricated and characterised 20 nm thick, 40 nm wide niobium-nitride nanowires and determined the impedance to 6.795 kΩ. We demonstrate internal quality factors Qi = 2.5e4 in nanowire resonators at single photon excitation, which is significantly higher than values reported in devices with similar materials and geometries. Moreover, we show that the dominant dissipation in our nanowires is not an intrinsic property of the disordered films, but can instead be fully understood within the framework of two-level systems.To further characterise these losses, we then explore the geometrical scaling, toward nanowire dimensions, of dielectric losses in superconducting microwave resonators fabricated with the same techniques and from the same NbN thin-film as the nanowire superinductors. For this purpose, we perform an experimental and numerical study of dielectric loss at low temperatures. Using 3D finite-element simulation of the Maxwell--London equations, we compute the geometric filling factors of the lossy regions in our resonator structures and fit the experimental data to determine the intrinsic loss tangents of its interfaces and dielectrics. Finally, we study the effect of two-level systems on the performance of various superconducting quantum circuits. For this purpose, we measure coherence-time fluctuations in qubits and frequency fluctuations in resonators. In all devices, through statistical analysis, we identify the signature of individual Lorentzian fluctuators in the noise. We find that fluctuations in qubit relaxation are local to the qubit and are caused by instabilities of near-resonant two-level-systems. Furthermore, when examining the low-frequency noise of three different types of superconducting resonator - one NbN nanowire, one Al coplanar waveguide, and one Al 3D cavity - we observe a similar power-law dependence of the Lorentzian switching time and amplitude on the circulating power in the resonators, suggesting a common noise mechanism in the three different types of devices

UWB Technology

Ultra Wide Band (UWB) technology has attracted increasing interest and there is a growing demand for UWB for several applications and scenarios. The unlicensed use of the UWB spectrum has been regulated by the Federal Communications Commission (FCC) since the early 2000s. The main concern in designing UWB circuits is to consider the assigned bandwidth and the low power permitted for transmission. This makes UWB circuit design a challenging mission in today's community. Various circuit designs and system implementations are published in this book to give the reader a glimpse of the state-of-the-art examples in this field. The book starts at the circuit level design of major UWB elements such as filters, antennas, and amplifiers; and ends with the complete system implementation using such modules

Metamaterial

In-depth analysis of the theory, properties and description of the most potential technological applications of metamaterials for the realization of novel devices such as subwavelength lenses, invisibility cloaks, dipole and reflector antennas, high frequency telecommunications, new designs of bandpass filters, absorbers and concentrators of EM waves etc. In order to create a new devices it is necessary to know the main electrodynamical characteristics of metamaterial structures on the basis of which the device is supposed to be created. The electromagnetic wave scattering surfaces built with metamaterials are primarily based on the ability of metamaterials to control the surrounded electromagnetic fields by varying their permeability and permittivity characteristics. The book covers some solutions for microwave wavelength scales as well as exploitation of nanoscale EM wavelength such as visible specter using recent advances of nanotechnology, for instance in the field of nanowires, nanopolymers, carbon nanotubes and graphene. Metamaterial is suitable for scholars from extremely large scientific domain and therefore given to engineers, scientists, graduates and other interested professionals from photonics to nanoscience and from material science to antenna engineering as a comprehensive reference on this artificial materials of tomorrow

Design and analysis of wideband passive microwave devices using planar structures

A selected volume of work consisting of 84 published journal papers is presented to demonstrate the contributions made by the author in the last seven years of his work at the University of Queensland in the area of Microwave Engineering. The over-arching theme in the author’s works included in this volume is the engineering of novel passive microwave devices that are key components in the building of any microwave system. The author’s contribution covers innovative designs, design methods and analyses for the following key devices and associated systems: Wideband antennas and associated systems Band-notched and multiband antennas Directional couplers and associated systems Power dividers and associated systems Microwave filters Phase shifters Much of the motivation for the work arose from the desire to contribute to the engineering o

Applied Measurement Systems

Measurement is a multidisciplinary experimental science. Measurement systems synergistically blend science, engineering and statistical methods to provide fundamental data for research, design and development, control of processes and operations, and facilitate safe and economic performance of systems. In recent years, measuring techniques have expanded rapidly and gained maturity, through extensive research activities and hardware advancements. With individual chapters authored by eminent professionals in their respective topics, Applied Measurement Systems attempts to provide a comprehensive presentation and in-depth guidance on some of the key applied and advanced topics in measurements for scientists, engineers and educators

Nanowire Superinductors

In this thesis, we demonstrate that a disordered superconductor with a high kinetic inductance can realize a low microwave loss, non-dissipative circuit element with an impedance greater than the quantum resistance (Rq = h/4e^2 = 6.5kΩ). This element, known as a superinductor, can produce a quantum circuit where charge fluctuations are suppressed.We have fabricated and characterized 20nm thick niobium-nitride nanowires with a width of 40nm, implementing a superinductance with impedance Z = 6.795kΩ. We demonstrate internal quality factors Qi = 2.5 710^4 at single photon excitation, which is significantly higher than values reported in devices with similar materials and geometries. Moreover, we show that the dominant dissipation in our nanowires is not an intrinsic property of the disordered films, but can instead be fully understood within the well-studied framework of two-level systems

A Low Total Harmonic Distortion Sinusoidal Oscillator Based on Digital Harmonic Cancellation Technique

Sinusoidal oscillator is intensively used in many applications, such as built-in-self-testing and ADC characterization. An innovative medical application for skin cancer detection employed a technology named bio-impedance spectroscopy, which also requires highly linear sinusoidal-wave as the reference clock. Moreover, the generated sinusoidal signals should be tunable within the frequency range from 10kHz to 10MHz, and quadrature outputs are demanded for coherent demodulation within the system. A design methodology of sinusoidal oscillator named digital-harmonic-cancellation (DHC) technique is presented. DHC technique is realized by summing up a set of square-wave signals with different phase shifts and different summing coefficient to cancel unwanted harmonics. With a general survey of literature, some sinusoidal oscillators based on DHC technique are reviewed and categorized. Also, the mathematical algorithm behind the technique is explained, and non-ideality effect is analyzed based on mathematical calculation. The prototype is fabricated in OnSemi 0.5um CMOS technology. The experimental results of this work show that it can achieve HD2 is -59.74dB and HD3 is -60dB at 0.9MHz, and the frequency is tunable over 0.1MHz to 0.9MHz. The chip consumes area of 0.76mm2, and power consumption at 0.9MHz is 2.98mW. Another design in IBM 0.18um technology is still in the phase of design. The preliminary simulation results show that the 0.18um design can realize total harmonic distortion of -72dB at 10MHz with the power consumption of 0.4mW. The new design is very competitive with state-of-art, which will be finished with layout, submitted for fabrication and measured later