Near-Surface Interface Detection for Coal Mining Applications Using Bispectral Features and GPR

The use of ground penetrating radar (GPR) for detecting the presence of near-surface interfaces is a scenario of special interest to the underground coal mining industry. The problem is difficult to solve in practice because the radar echo from the near-surface interface is often dominated by unwanted components such as antenna crosstalk and ringing, ground-bounce effects, clutter, and severe attenuation. These nuisance components are also highly sensitive to subtle variations in ground conditions, rendering the application of standard signal pre-processing techniques such as background subtraction largely ineffective in the unsupervised case. As a solution to this detection problem, we develop a novel pattern recognition-based algorithm which utilizes a neural network to classify features derived from the bispectrum of 1D early time radar data. The binary classifier is used to decide between two key cases, namely whether an interface is within, for example, 5 cm of the surface or not. This go/no-go detection capability is highly valuable for underground coal mining operations, such as longwall mining, where the need to leave a remnant coal section is essential for geological stability. The classifier was trained and tested using real GPR data with ground truth measurements. The real data was acquired from a testbed with coal-clay, coal-shale and shale-clay interfaces, which represents a test mine site. We show that, unlike traditional second order correlation based methods such as matched filtering which can fail even in known conditions, the new method reliably allows the detection of interfaces using GPR to be applied in the near-surface region. In this work, we are not addressing the problem of depth estimation, rather confining ourselves to detecting an interface within a particular depth range

DISCUS - The Deep Interior Scanning CubeSat mission to a rubble pile near-Earth asteroid

We have performed an initial stage conceptual design study for the Deep Interior Scanning CubeSat (DISCUS), a tandem 6U CubeSat carrying a bistatic radar as main payload. DISCUS will be operated either as an independent mission or accompanying a larger one. It is designed to determine the internal macroporosity of a 260-600 m diameter Near Earth Asteroid (NEA) from a few kilometers distance. The main goal will be to achieve a global penetration with a low-frequency signal as well as to analyze the scattering strength for various different penetration depths and measurement positions. Moreover, the measurements will be inverted through a computed radar tomography (CRT) approach. The scientific data provided by DISCUS would bring more knowledge of the internal configuration of rubble pile asteroids and their collisional evolution in the Solar System. It would also advance the design of future asteroid deflection concepts. We aim at a single-unit (1U) radar design equipped with a half-wavelength dipole antenna. The radar will utilize a stepped-frequency modulation technique the baseline of which was developed for ESA's technology projects GINGER and PIRA. The radar measurements will be used for CRT and shape reconstruction. The CubeSat will also be equipped with an optical camera system and laser altimeter to sup- port navigation and shape reconstruction. We provide the details of the measurement methods to be applied along with the requirements derived of the known characteristics of rubble pile asteroids.Comment: Submitted to Advances in Space Researc

Guidebook on Detection Technologies and Systems for Humanitarian Demining

The aim of this publication is to provide the mine action community, and those supporting mine action, with a consolidated review and status summary of detection technologies that could be applied to humanitarian demining operations. This Guidebook is meant to provide information to a wide variety of readers. For those not familiar with the spectrum of technologies being considered for the detection of landmines and for area reduction, there is a brief overview of the principle of operation for each technology as well as a summary listing of the strengths, limitations, and potential for use of the technology to humanitarian demining. For those with an intermediate level of understanding for detection technologies, there is information regarding some of the more technical details of the system to give an expanded overview of the principles involved and hardware development that has taken place. Where possible, technical specifications for the systems are provided. For those requiring more information for a particular system, relevant publications lists and contact information are also provided

Designing a Cavity Backed Microstrip Antenna with Enhanced Isolation for the Development of a Continuous Wave Ground Penetrating Radar

This paper presents an improved design of a rectangular microstrip antenna at 920 MHz by backing it with an appropriate cavity wall to enhance the isolation between the transmitter and receiver antenna for use in applications, where the weak received power gets masked by the direct coupled power between two antennas. Antennas having 0.12 λ cavity wall with separation gap of 0.36 λ resulted in an isolation of 52.6 dB at a resonance frequency of 920 MHz with maximum and minimum isolation of 71.4 dB and 49.1 dB, respectively for 5% BW of the antenna designed. These antennas were fabricated and tested, which are used in the development of Continuous Wave Ground Penetrating Radar with an online graphical user interface; leading to the validation of the usefulness of proposed antennas. The isolation achieved at an optimised separation of the antennas enabled detection of metal targets as small as a bunch of wire buried 20 cm in the soil and non-metal, like wood and plastic buried in soil. It enabled the detection of a circular steel target of radius 12.5 cm buried at a depth of 65 cm in loose semi-dry pebbled soil

The WISDOM Radar: Unveiling the Subsurface Beneath the ExoMars Rover and Identifying the Best Locations for Drilling

The search for evidence of past or present life on Mars is the principal objective of the 2020 ESA-Roscosmos ExoMars Rover mission. If such evidence is to be found anywhere, it will most likely be in the subsurface, where organic molecules are shielded from the destructive effects of ionizing radiation and atmospheric oxidants. For this reason, the ExoMars Rover mission has been optimized to investigate the subsurface to identify, understand, and sample those locations where conditions for the preservation of evidence of past life are most likely to be found. The Water Ice Subsurface Deposit Observation on Mars (WISDOM) ground-penetrating radar has been designed to provide information about the nature of the shallow subsurface over depth ranging from 3 to 10 m (with a vertical resolution of up to 3 cm), depending on the dielectric properties of the regolith. This depth range is critical to understanding the geologic evolution stratigraphy and distribution and state of subsurface H2O, which provide important clues in the search for life and the identification of optimal drilling sites for investigation and sampling by the Rover's 2-m drill. WISDOM will help ensure the safety and success of drilling operations by identification of potential hazards that might interfere with retrieval of subsurface samples

Test and Evaluation of Japanese GPR-based AP Mine Detection Systems Mounted on Robotic Vehicles

This article introduces Japanese activities regarding a project, “Research and Development of Sensing Technology, Access and Control Technology to Support Humanitarian Demining of AP Mines.” This project, which includes the research of six teams from academia and industry, has been funded by the Japan Science and Technology Agency (JST) under the auspices of the Ministry of Education, Culture, Sports, Science and Technology (MEX T). The developed systems are equipped with both groundpenetrating radar and a metal detector, and they are designed to make no explicit alarm and to leave decision-making of detection using subsurface images to the operators. To evaluate these kinds of systems, a series of trials was conducted in Japan from 8 February to 11 March 2005

Railway track condition assessment at network level by frequency domain analysis of GPR data

The railway track system is a crucial infrastructure for the transportation of people and goods in modern societies. With the increase in railway traffic, the availability of the track for monitoring and maintenance purposes is becoming significantly reduced. Therefore, continuous non-destructive monitoring tools for track diagnoses take on even greater importance. In this context, Ground Penetrating Radar (GPR) technique results yield valuable information on track condition, mainly in the identification of the degradation of its physical and mechanical characteristics caused by subsurface malfunctions. Nevertheless, the application of GPR to assess the ballast condition is a challenging task because the material electromagnetic properties are sensitive to both the ballast grading and water content. This work presents a novel approach, fast and practical for surveying and analysing long sections of transport infrastructure, based mainly on expedite frequency domain analysis of the GPR signal. Examples are presented with the identification of track events, ballast interventions and potential locations of malfunctions. The approach, developed to identify changes in the track infrastructure, allows for a user-friendly visualisation of the track condition, even for GPR non-professionals such as railways engineers, and may further be used to correlate with track geometric parameters. It aims to automatically detect sudden variations in the GPR signals, obtained with successive surveys over long stretches of railway lines, thus providing valuable information in asset management activities of infrastructure managers

The design of hardware and signal processing for a stepped frequency continuous wave ground penetrating radar

Includes bibliographical references.A Ground Penetrating Radar (GPR) sensor is required to provide information that will allow the user to detect, classify and identify the target. This is an extremely tough requirement, especially when one considers the limited amount of information provided by most GPRs to accomplish this task. One way of increasing this information is to capture the complete scattering matrix of the received radar waveform. The objective of this thesis is to develop a signal processing technique to extract polarimetric feature vectors from Stepped Frequency Continuous Wave (SFGWV) GPR data. This was achieved by first developing an algorithm to extract the parameters from single polarization SFCW GPR data and then extending this algorithm to extract target features from fully polarimetric data. A model is required to enable the extraction of target parameters from raw radar data. A single polarization SFCW GPR model is developed based on the radar geometry and linear approximations to the wavenumber in a lossy medium. Assuming high operating frequencies and/or low conductive losses, the model is shown to be equivalent to the exponential model found in signal processing theory. A number of algorithms exist to extract the required target parameters from the measured data in a least squared sense. In this thesis the Matrix Pencil-of-Function Method is used. Numerical simulations are presented to show the performance of this algorithm for increasing model error. Simulations are also provided to compare the standard Inverse Discrete Fourier Transform (IDFT) with the algorithm presented in this thesis. The processing is applied to two sets of measured radar data using the radar developed in the thesis. The technique was able to locate the position of the scatterers for both sets of data, thus demonstrating the success of the algorithm on practical measurements. The single polarization model is extended to a fully polarimetric SFCW GPR model. The model is shown to relate to the multi-dimensional exponential signal processing model, given certain assumptions about the target scattering damping factor. The multi-snapshot Matrix Pencil-of-Function Method is used to extract the scattering matrix parameters from the raw polarimetric stepped frequency data. Those Huynen target parameters that are independent of the properties of the medium, are extracted from the estimated scattering matrices. Simulations are performed to examine the performance of the algorithm for increasing conductive and dielectric losses. The algorithm is also applied to measured data for a number of targets buried a few centimeters below the ground surface, with promising results. Finally, the thesis describes the design and development of a low cost, compact and low power SFCW GPR system. It addresses both the philosophy as well as the technology that was used to develop a 200 - 1600 MHz and a 1 - 2 GHz system. The system is built around a dual synthesizer heterodyne architecture with a single intermediate frequency stage and a novel coherent demodulator system - with a single reference source. Comparison of the radar system with a commercial impulse system, shows that the results are of a similar quality. Further measurements demonstrate the radar performance for different field test cases, including the mapping of the bottom of an outdoor test site down to 1.6 m