Cooperative UAV–UGV autonomous power pylon inspection: an investigation of cooperative outdoor vehicle positioning architecture

Realizing autonomous inspection, such as that of power distribution lines, through unmanned aerial vehicle (UAV) systems is a key research domain in robotics. In particular, the use of autonomous and semi-autonomous vehicles to execute the tasks of an inspection process can enhance the efficacy and safety of the operation; however, many technical problems, such as those pertaining to the precise positioning and path following of the vehicles, robust obstacle detection, and intelligent control, must be addressed. In this study, an innovative architecture involving an unmanned aircraft vehicle (UAV) and an unmanned ground vehicle (UGV) was examined for detailed inspections of power lines. In the proposed strategy, each vehicle provides its position information to the other, which ensures a safe inspection process. The results of real-world experiments indicate a satisfactory performance, thereby demonstrating the feasibility of the proposed approach.This research was funded by National Counsel of Technological and Scientific Development of Brazil (CNPq). The authors thank the National Counsel of Technological and Scientific Development of Brazil (CNPq); Coordination for the Improvement of Higher Level People (CAPES); and the Brazilian Ministry of Science, Technology, Innovation, and Communication (MCTIC). The authors would also like express their deepest gratitude to Control Robotics for sharing the Pioneer P3 robot for the experiments. Thanks to Leticia Cantieri for editing the experiment video.info:eu-repo/semantics/publishedVersio

Integration of UAS in the civil airworthiness regulatory system: present and future

The last years are witnessing a number of initiatives worldwide devoted to assess the safety levels of the unmanned aircraft. These initiatives are very heterogeneous; some of them are centred in airworthiness aspects while others focus on operations. From the point of view of a potential UAS manufacturer the actual situation is plenty of uncertainties in relation to the regulations to be applied for certifying the design, manufacturing and maintenance, and from the point of view of the potential operator the situation is analogous with respect to operational procedures. In the present work the emphasis is on the manufacturer’s situation. The objective of this work is to clarify the present civil airworthiness regulatory scene by summarizing all the regulatory efforts up to date and preparing a comparative analysis of them. In this comparison, the manned regulations are included too. The most representative state-of-the-art UAS are analyzed from the point of view of the existing and the future regulatory framework. The main aspects to be considered are related to the airworthiness certification (performances, structural design, etc) for which a quantitative comparison is established in order to clarify how the new regulatory framework, mainly based on the conventional aircraft certification codes, will affect future UAS, compared to the existing regulation

Space exploration: The interstellar goal and Titan demonstration

Automated interstellar space exploration is reviewed. The Titan demonstration mission is discussed. Remote sensing and automated modeling are considered. Nuclear electric propulsion, main orbiting spacecraft, lander/rover, subsatellites, atmospheric probes, powered air vehicles, and a surface science network comprise mission component concepts. Machine, intelligence in space exploration is discussed

Customizable Tele-Operated Unmanned Ground Vehicle

Unmanned Ground Vehicles will play a very important role in the nation’s next generation ground forces. Control of the UGV is accomplished remotely, through a command system that allows an operator to receive sensor data and send motion commands to the vehicle. Being able to modify the UGV as per need will help us enlarge its scope of use

Exploration of the solar system

A sourcebook of information on the solar system and the technology used for its exploration is presented. An outline of the potential achievements of solar system exploration is given along with a course of action which maximizes the rewards to mankind

Optimisation-based verification process of obstacle avoidance systems for unmanned vehicles

This thesis deals with safety verification analysis of collision avoidance systems for unmanned vehicles. The safety of the vehicle is dependent on collision avoidance algorithms and associated control laws, and it must be proven that the collision avoidance algorithms and controllers are functioning correctly in all nominal conditions, various failure conditions and in the presence of possible variations in the vehicle and operational environment. The current widely used exhaustive search based approaches are not suitable for safety analysis of autonomous vehicles due to the large number of possible variations and the complexity of algorithms and the systems. To address this topic, a new optimisation-based verification method is developed to verify the safety of collision avoidance systems. The proposed verification method formulates the worst case analysis problem arising the verification of collision avoidance systems into an optimisation problem and employs optimisation algorithms to automatically search the worst cases. Minimum distance to the obstacle during the collision avoidance manoeuvre is defined as the objective function of the optimisation problem, and realistic simulation consisting of the detailed vehicle dynamics, the operational environment, the collision avoidance algorithm and low level control laws is embedded in the optimisation process. This enables the verification process to take into account the parameters variations in the vehicle, the change of the environment, the uncertainties in sensors, and in particular the mismatching between model used for developing the collision avoidance algorithms and the real vehicle. It is shown that the resultant simulation based optimisation problem is non-convex and there might be many local optima. To illustrate and investigate the proposed optimisation based verification process, the potential field method and decision making collision avoidance method are chosen as an obstacle avoidance candidate technique for verification study. Five benchmark case studies are investigated in this thesis: static obstacle avoidance system of a simple unicycle robot, moving obstacle avoidance system for a Pioneer 3DX robot, and a 6 Degrees of Freedom fixed wing Unmanned Aerial Vehicle with static and moving collision avoidance algorithms. It is proven that although a local optimisation method for nonlinear optimisation is quite efficient, it is not able to find the most dangerous situation. Results in this thesis show that, among all the global optimisation methods that have been investigated, the DIviding RECTangle method provides most promising performance for verification of collision avoidance functions in terms of guaranteed capability in searching worst scenarios

Worst-case analysis of moving obstacle avoidance systems for unmanned vehicles

This paper investigates worst-case analysis of a moving obstacle avoidance algorithm for unmanned vehicles in a dynamic environment in the presence of uncertainties and variations. Automatic worst-case search algorithms are developed based on optimization techniques, and illustrated by a Pioneer robot with a moving obstacle avoidance algorithm developed using the potential field method. The uncertainties in physical parameters, sensor measurements, and even the model structure of the robot are taken into account in the worst-case analysis. The minimum distance to a moving obstacle is considered as an objective function in automatic search process. It is demonstrated that a local nonlinear optimization method may not be adequate, and global optimization techniques are necessary to provide reliable worst-case analysis. The Monte Carlo simulation is carried out to demonstrate that the proposed automatic search methods provide a significant advantage over random sampling approaches

Fault-tolerant formation driving mechanism designed for heterogeneous MAVs-UGVs groups

A fault-tolerant method for stabilization and navigation of 3D heterogeneous formations is proposed in this paper. The presented Model Predictive Control (MPC) based approach enables to deploy compact formations of closely cooperating autonomous aerial and ground robots in surveillance scenarios without the necessity of a precise external localization. Instead, the proposed method relies on a top-view visual relative localization provided by the micro aerial vehicles flying above the ground robots and on a simple yet stable visual based navigation using images from an onboard monocular camera. The MPC based schema together with a fault detection and recovery mechanism provide a robust solution applicable in complex environments with static and dynamic obstacles. The core of the proposed leader-follower based formation driving method consists in a representation of the entire 3D formation as a convex hull projected along a desired path that has to be followed by the group. Such an approach provides non-collision solution and respects requirements of the direct visibility between the team members. The uninterrupted visibility is crucial for the employed top-view localization and therefore for the stabilization of the group. The proposed formation driving method and the fault recovery mechanisms are verified by simulations and hardware experiments presented in the paper