3,178 research outputs found
Integrating heterogeneous distributed COTS discrete-event simulation packages: An emerging standards-based approach
This paper reports on the progress made toward the emergence of standards to support the integration of heterogeneous discrete-event simulations (DESs) created in specialist support tools called commercial-off-the-shelf (COTS) discrete-event simulation packages (CSPs). The general standard for heterogeneous integration in this area has been developed from research in distributed simulation and is the IEEE 1516 standard The High Level Architecture (HLA). However, the specific needs of heterogeneous CSP integration require that the HLA is augmented by additional complementary standards. These are the suite of CSP interoperability (CSPI) standards being developed under the Simulation Interoperability Standards Organization (SISO-http://www.sisostds.org) by the CSPI Product Development Group (CSPI-PDG). The suite consists of several interoperability reference models (IRMs) that outline different integration needs of CSPI, interoperability frameworks (IFs) that define the HLA-based solution to each IRM, appropriate data exchange representations to specify the data exchanged in an IF, and benchmarks termed CSP emulators (CSPEs). This paper contributes to the development of the Type I IF that is intended to represent the HLA-based solution to the problem outlined by the Type I IRM (asynchronous entity passing) by developing the entity transfer specification (ETS) data exchange representation. The use of the ETS in an illustrative case study implemented using a prototype CSPE is shown. This case study also allows us to highlight the importance of event granularity and lookahead in the performance and development of the Type I IF, and to discuss possible methods to automate the capture of appropriate values of lookahead
Commercial-off-the-shelf simulation package interoperability: Issues and futures
Commercial-Off-The-Shelf Simulation Packages (CSPs) are widely used in industry to simulate discrete-event models. Interoperability of CSPs requires the use of distributed simulation techniques. Literature presents us with many examples of achieving CSP interoperability using bespoke solutions. However, for the wider adoption of CSP-based distributed simulation it is essential that, first and foremost, a standard for CSP interoperability be created, and secondly, these standards are adhered to by the CSP vendors. This advanced tutorial is on an emerging standard relating to CSP interoperability. It gives an overview of this standard and presents case studies that implement some of the proposed standards. Furthermore, interoperability is discussed in relation to large and complex models developed using CSPs that require large amount of computing resources. It is hoped that this tutorial will inform the simulation community of the issues associated with CSP interoperability, the importance of these standards and its future
Recommended from our members
Semantic web services for simulation component reuse and interoperability: An ontology approach
Commercial-off-the-shelf (COTS) Simulation Packages (CSPs) are widely used in industry primarily due to economic factors associated with developing proprietary software platforms. Regardless of their widespread use, CSPs have yet to operate across organizational boundaries. The limited reuse and interoperability of CSPs are affected by the same semantic issues that restrict the inter-organizational use of software components and web services. The current representations of Web components are predominantly syntactic in nature lacking the fundamental semantic underpinning required to support discovery on the emerging Semantic Web. The authors present new research that partially alleviates the problem of limited semantic reuse and interoperability of simulation components in CSPs. Semantic models, in the form of ontologies, utilized by the authors’ Web service discovery and deployment architecture provide one approach to support simulation model reuse. Semantic interoperation is achieved through a simulation component ontology that is used to identify required components at varying levels of granularity (i.e. including both abstract and specialized components). Selected simulation components are loaded into a CSP, modified according to the requirements of the new model and executed. The research presented here is based on the development of an ontology, connector software, and a Web service discovery architecture. The ontology is extracted from simulation scenarios involving airport, restaurant and kitchen service suppliers. The ontology engineering framework and discovery architecture provide a novel approach to inter-organizational simulation, by adopting a less intrusive interface between participants Although specific to CSPs this work has wider implications for the simulation community. The reason being that the community as a whole stands to benefit through from an increased awareness of the state-of-the-art in Software Engineering (for example, ontology-supported component discovery and reuse, and service-oriented computing), and it is expected that this will eventually lead to the development of a unique Software Engineering-inspired methodology to build simulations in future
Recommended from our members
A Web Services Component Discovery and Deployment Architecture for Simulation Model Reuse
CSPs are widely used in industry, although have yet to operate across organizational boundaries. Reuse across organizations is restricted by the same semantic issues that restrict the inter-organization use of web services. The current representations of web components are predominantly syntactic in nature lacking the fundamental semantic underpinning required to support discovery on the emerging semantic web. Semantic models, in the form of ontology, utilized by web service discovery and deployment architecture provide one approach to support simulation model reuse. Semantic interoperation is achieved through the use of simulation component ontology to identify required components at varying levels of granularity (including both abstract and specialized components). Selected simulation components are loaded into a CSP, modified according to the requirements of the new model and executed. The paper presents the development carried out within CSPI-PDG and Fluidity Group at Brunel University, of an ontology, connector software and web service discovery architecture. The ontology is extracted from simulation scenarios involving airport, restaurant and kitchen service suppliers. The ontology engineering framework and discovery architecture provide a novel approach to inter-organization simulation, adopting a less intrusive interface between participants. Although specific to CSPs the work has wider implications for the simulation community
Semantic web service architecture for simulation model reuse
COTS simulation packages (CSPs) have proved popular in an industrial setting with a number of software vendors. In contrast, options for re-using existing models seem more limited. Re-use of simulation component models by collaborating organizations is restricted by the same semantic issues however that restrict the inter-organization use of web services. The current representations of web components are predominantly syntactic in nature lacking the fundamental semantic underpinning required to support discovery on the emerging semantic web. Semantic models, in the form of ontology, utilized by web service discovery and deployment architecture provide one approach to support simulation model reuse. Semantic interoperation is achieved through the use of simulation component ontology to identify required components at varying levels of granularity (including both abstract and specialized components). Selected simulation components are loaded into a CSP, modified according to the requirements of the new model and executed. The paper presents the development of ontology, connector software and web service discovery architecture in order to understand how such ontology are created, maintained and subsequently used for simulation model reuse. The ontology is extracted from health service simulation - comprising hospitals and the National Blood Service. The ontology engineering framework and discovery architecture provide a novel approach to inter- organization simulation, uncovering domain semantics and adopting a less intrusive interface between participants. Although specific to CSPs the work has wider implications for the simulation community
Ontology engineering for simulation component reuse
Commercial-off-the-shelf (COTS) simulation packages (CSPs) are widely used in industry, although they have yet to operate across organizational boundaries. Reuse across organizations is restricted by the same semantic issues that restrict the inter-organizational use of web services. The current representations of web components are predominantly syntactic in nature lacking the fundamental semantic underpinning required to support discovery on the emerging semantic web. Semantic models, in the form of ontology, utilized by web service discovery and deployment architectures provide one approach to support simulation model reuse. Semantic interoperation is achieved through the use of simulation component ontologies to identify required components at varying levels of granularity (including both abstract and specialized components). Selected simulation components are loaded into a CSP, modified according to the requirements of the new model and executed. The paper presents the development of an ontology, connector software and web service discovery architecture. The ontology is extracted from simulation scenarios involving airport, restaurant and kitchen service suppliers. The ontology engineering framework and discovery architecture provide a novel approach to inter-organizational simulation, adopting a less intrusive interface between participants. Although specific to CSPs the work has wider implications for the simulation community
Service-oriented simulation using web ontology
Copyright © 2012 Inderscience Enterprises Ltd.Commercial-off-the-Shelf (COTS) Simulation Packages (CSPs) have proved popular in a wider industrial setting. Reuse of Simulation Component (SC) models by collaborating organisations or divisions is restricted, however, by the same semantic issues that restrict the inter-organisation use of other software services. Semantic models, in the form of ontology, utilised by a web-service-based discovery and deployment architecture provide one approach to support simulation model reuse. Semantic interoperation is achieved using domain-grounded SC ontology to identify reusable components and subsequently loaded into a CSP, and locally or remotely executed. The work is based on a health service simulation that addresses the transportation of blood. The ontology-engineering framework and discovery architecture provide a novel approach to inter-organisation simulation, uncovering domain semantics and providing a less intrusive mechanism for component reuse. The resulting web of component models and simulation execution environments present a nascent approach to simulation grids
A theoretical and computational basis for CATNETS
The main content of this report is the identification and definition of market mechanisms for Application Layer Networks (ALNs). On basis of the structured Market Engineering process, the work comprises the identification of requirements which adequate market mechanisms for ALNs have to fulfill. Subsequently, two mechanisms for each, the centralized and the decentralized case are described in this document. These build the theoretical foundation for the work within the following two years of the CATNETS project. --Grid Computing
- …