Solutions for New Terrestrial Broadcasting Systems Offering Simultaneously Stationary and Mobile Services

221 p.[EN]Since the first broadcasted TV signal was transmitted in the early decades of the past century, the television broadcasting industry has experienced a series of dramatic changes. Most recently, following the evolution from analogue to digital systems, the digital dividend has become one of the main concerns of the broadcasting industry. In fact, there are many international spectrum authorities reclaiming part of the broadcasting spectrum to satisfy the growing demand of other services, such as broadband wireless services, arguing that the TV services are not very spectrum-efficient. Apart from that, it must be taken into account that, even if up to now the mobile broadcasting has not been considered a major requirement, this will probably change in the near future. In fact, it is expected that the global mobile data traffic will increase 11-fold between 2014 and 2018, and what is more, over two thirds of the data traffic will be video stream by the end of that period. Therefore, the capability to receive HD services anywhere with a mobile device is going to be a mandatory requirement for any new generation broadcasting system. The main objective of this work is to present several technical solutions that answer to these challenges. In particular, the main questions to be solved are the spectrum efficiency issue and the increasing user expectations of receiving high quality mobile services. In other words, the main objective is to provide technical solutions for an efficient and flexible usage of the terrestrial broadcasting spectrum for both stationary and mobile services. The first contributions of this scientific work are closely related to the study of the mobile broadcast reception. Firstly, a comprehensive mathematical analysis of the OFDM signal behaviour over time-varying channels is presented. In order to maximize the channel capacity in mobile environments, channel estimation and equalization are studied in depth. First, the most implemented equalization solutions in time-varying scenarios are analyzed, and then, based on these existing techniques, a new equalization algorithm is proposed for enhancing the receivers’ performance. An alternative solution for improving the efficiency under mobile channel conditions is treating the Inter Carrier Interference as another noise source. Specifically, after analyzing the ICI impact and the existing solutions for reducing the ICI penalty, a new approach based on the robustness of FEC codes is presented. This new approach employs one dimensional algorithms at the receiver and entrusts the ICI removing task to the robust forward error correction codes. Finally, another major contribution of this work is the presentation of the Layer Division Multiplexing (LDM) as a spectrum-efficient and flexible solution for offering stationary and mobile services simultaneously. The comprehensive theoretical study developed here verifies the improved spectrum efficiency, whereas the included practical validation confirms the feasibility of the system and presents it as a very promising multiplexing technique, which will surely be a strong candidate for the next generation broadcasting services.[ES]Desde el comienzo de la transmisión de las primeras señales de televisión a principios del siglo pasado, la radiodifusión digital ha evolucionado gracias a una serie de cambios relevantes. Recientemente, como consecuencia directa de la digitalización del servicio, el dividendo digital se ha convertido en uno de los caballos de batalla de la industria de la radiodifusión. De hecho, no son pocos los consorcios internacionales que abogan por asignar parte del espectro de radiodifusión a otros servicios como, por ejemplo, la telefonía móvil, argumentado la poca eficiencia espectral de la tecnología de radiodifusión actual. Asimismo, se debe tener en cuenta que a pesar de que los servicios móviles no se han considerado fundamentales en el pasado, esta tendencia probablemente variará en el futuro cercano. De hecho, se espera que el tráfico derivado de servicios móviles se multiplique por once entre los años 2014 y 2018; y lo que es más importante, se pronostica que dos tercios del tráfico móvil sea video streaming para finales de ese periodo. Por lo tanto, la posibilidad de ofrecer servicios de alta definición en dispositivos móviles es un requisito fundamental para los sistemas de radiodifusión de nueva generación. El principal objetivo de este trabajo es presentar soluciones técnicas que den respuesta a los retos planteados anteriormente. En particular, las principales cuestiones a resolver son la ineficiencia espectral y el incremento de usuarios que demandan mayor calidad en los contenidos para dispositivos móviles. En pocas palabras, el principal objetivo de este trabajo se basa en ofrecer una solución más eficiente y flexible para la transmisión simultánea de servicios fijos y móviles. La primera contribución relevante de este trabajo está relacionada con la recepción de la señal de televisión en movimiento. En primer lugar, se presenta un completo análisis matemático del comportamiento de la señal OFDM en canales variantes con el tiempo. A continuación, con la intención de maximizar la capacidad del canal, se estudian en profundidad los algoritmos de estimación y ecualización. Posteriormente, se analizan los algoritmos de ecualización más implementados, y por último, basándose en estas técnicas, se propone un nuevo algoritmo de ecualización para aumentar el rendimiento de los receptores en tales condiciones. Del mismo modo, se plantea un nuevo enfoque para mejorar la eficiencia de los servicios móviles basado en tratar la interferencia entre portadoras como una fuente de ruido. Concretamente, tras analizar el impacto del ICI en los receptores actuales, se sugiere delegar el trabajo de corrección de dichas distorsiones en códigos FEC muy robustos. Finalmente, la última contribución importante de este trabajo es la presentación de la tecnología LDM como una manera más eficiente y flexible para la transmisión simultánea de servicios fijos y móviles. El análisis teórico presentado confirma el incremento en la eficiencia espectral, mientras que el estudio práctico valida la posible implementación del sistema y presenta la tecnología LDM c

DSP implementation of OFDM acoustic modem

The success of multicarrier modulation in the form of OFDM in radio channels illuminates a path one could take towards high-rate underwater acoustic communications,and recently there are intensive investigations on underwater OFDM. Processing power has increased to a point where orthogonal frequency division multiplexing (OFDM) has become feasible and economical. Since many wireless communication systems being developed use OFDM, it is a worthwhile research topic. Some examples of applications using OFDM include Digital subscriber line (DSL), Digital Audio Broadcasting (DAB),High definition television (HDTV) broadcasting, IEEE 802.11 (wireless networking standard).OFDM is a strong candidate and has been suggested or standardized in high speed communication systems. In this Thesis in first phase ,we analyzes the factor that affects the OFDM performance. The performance of OFDM was assessed by using computer simulations performed using Matlab7.2 .it was simulated under Additive white Gaussian noise (AWGN) ,Exponential Multipath channel and Carrier frequency offset conditions for different modulation schemes like binary phase shift keying (BPSK), Quadrature phase shift keying (QPSK),16 Quadrature amplitude modulation (16-QAM),64-Quadrature amplitude modulation(64-QAM)which are used for achieving high data rates.In second phase we implement the acoustic OFDM transmitter and receiver design of [4,5] on a TMS320C6713 DSP board. We analyze the workload and identify the most timeconsuming operations. Based on the workload analysis, we tune the algorithms and optimize the code to substantially reduce the synchronization time to 0.2 seconds and the processing time of one OFDM block to 2.7235 seconds on a DSP processor at 225 MHz. This experimentation provides guidelines on our future work to reduce the per-block processing time to be less than the block duration of 0.23 seconds for real time operations

Effects of Fixed Point FFT Implementation of Wireless LAN

With the rapid growth of digital wireless communication in recent years, the need for high speed mobile data transmission has increased. New modulation techniques are being implemented to keep with the desire more communication capacity. Processing power has increased to a point where orthogonal frequency division multiplexing (OFDM) has become feasible and economical. Since many wireless communication systems being developed use OFDM, it is a worthwhile research topic. Some examples of applications using OFDM include Digital subscriber line (DSL), Digital Audio Broadcasting (DAB), High definition television (HDTV) broadcasting, IEEE 802.11 (wireless networking standard).OFDM is a strong candidate and has been suggested or standardized in high speed communication systems. This thesis analyzes the factor that affects the OFDM performance. The performance of OFDM was assessed by using computer simulations performed using Matlab.it was simulated under Additive white Gaussian noise (AWGN) channel conditions for different modulation schemes like binary phase shift keying (BPSK), Quadrature phase shift keying (QPSK), 16-Quadrature amplitude modulation (16-QAM), 64-Quadrature amplitude modulation (64-QAM) which are used in wireless LAN for achieving high data rates. One key component in OFDM based systems is inverse fast Fourier transform/fast Fourier transform (IFFT/FFT) computation, which performs the efficient modulation/demodulation. This block consumes large resources in terms of computational power.this thesis analyzes, different IFFT/FFT implementation on performance of OFDM communication system. Here 64-point IFFT/ FFT is used. FFT is a complex function whose computational accuracy, hardware size and processing speed depend on the type of arithmetic format used to implement it. Due to non-linearity of FFT its computational accuracy is not easy to calculate theoretically. The simulation carried out here, measure the effects of fixed point FFT on the performance of OFDM. Comparison has been made between bit error rate of OFDM using fixed point IFFT/FFT and a floating point IFFT/FFT. Simulation tests were made for different integer part lengths, fractional part lengths by limiting the input word lengths to 16 bits and found the suitable combination of integer part lengths and fractional part lengths which can achieve the best bit error rate (BER) performance with respect to floating point performance. Extensive computer simulations show that fixed point computation provides very near result as floating point if the delay parameter is suitably selected

Hybrid solutions to instantaneous MIMO blind separation and decoding: narrowband, QAM and square cases

Future wireless communication systems are desired to support high data rates and high quality transmission when considering the growing multimedia applications. Increasing the channel throughput leads to the multiple input and multiple output and blind equalization techniques in recent years. Thereby blind MIMO equalization has attracted a great interest.Both system performance and computational complexities play important roles in real time communications. Reducing the computational load and providing accurate performances are the main challenges in present systems. In this thesis, a hybrid method which can provide an affordable complexity with good performance for Blind Equalization in large constellation MIMO systems is proposed first. Saving computational cost happens both in the signal sep- aration part and in signal detection part. First, based on Quadrature amplitude modulation signal characteristics, an efficient and simple nonlinear function for the Independent Compo- nent Analysis is introduced. Second, using the idea of the sphere decoding, we choose the soft information of channels in a sphere, and overcome the so- called curse of dimensionality of the Expectation Maximization (EM) algorithm and enhance the final results simultaneously. Mathematically, we demonstrate in the digital communication cases, the EM algorithm shows Newton -like convergence.Despite the widespread use of forward -error coding (FEC), most multiple input multiple output (MIMO) blind channel estimation techniques ignore its presence, and instead make the sim- plifying assumption that the transmitted symbols are uncoded. However, FEC induces code structure in the transmitted sequence that can be exploited to improve blind MIMO channel estimates. In final part of this work, we exploit the iterative channel estimation and decoding performance for blind MIMO equalization. Experiments show the improvements achievable by exploiting the existence of coding structures and that it can access the performance of a BCJR equalizer with perfect channel information in a reasonable SNR range. All results are confirmed experimentally for the example of blind equalization in block fading MIMO systems

Evaluation of Interference-Cancellation Based MAC Protocols for Vehicular Communications

Vehicular communications form an important part of future intelligent transport systems. Wireless connectivity between vehicles can enhance safety in vehicular networks and enable new services such as adaptive traffic control, collision detection and avoidance. As several new algorithms are being developed for enhancing vehicle to vehicle wireless connectivity, it is important to validate the performance of these algorithms using reasonably accurate wireless channel models. Specifically, some recent developments in the medium access control (MAC) layer algorithms appear to have the potential to improve the performance of vehicle to vehicle communications; however, these algorithms have not been validated with realistic channel models encountered in vehicular communications. The aforementioned issues are addressed in this thesis and correspondingly, there are two main contributions - (i) A complete IEEE 802.11p based transceiver model has been simulated in MATLAB and its performance & reliability are tested using existing empirically-developed wireless channel models. (ii) A new MAC layer algorithm based on slotted ALOHA with successive interference cancellation(SIC) has been evaluated and tested by taking into consideration the performance of underlying physical layer. The performance of slotted ALOHA-SIC and the already existing carrier sense multiple access with collision avoidance (CSMA/CA) scheme with respect to channel access delay and average packet loss ratio is also studied

Receiver design for nonlinearly distorted OFDM : signals applications in radio-over-fiber systems

Tese de doutoramento. Engenharia Electrotécnica e de Computadores. Universidade do Porto. Faculdade de Engenharia. 201

Etude et évaluation d un multiplexage fréquentiel basé sur l OFDM/OQAM

Cette thèse est consacrée à l étude de la modulation OFDM/OQAM en tant qu alternative à la modulation OFDM. Nous traitons plus particulièrement le contexte multiusagers. De ce point de vue, les aspects de synchronisation sont déterminants. Les différentes options plus le choix de la forme d onde sont donc examinés de ce point de vue. Un autre objectif est de montrer de manière précise comment la modulation OFDM/OQAM peut s adapter à une transmission de type cellulaire, en prenant comme référence le système 3GPP/LTE. Les principales contributions que nous avons apportées sont : 1) Une analyse des phénomènes de désynchronisation : nous analysons l effet de la désynchronisation, suivant les axes temporel et fréquentiel, sur les performances de l OFDM/OQAM au récepteur. 2) Méthode de synchronisation : nous analysons une méthode de synchronisation temporelle définie dans un contexte de transmission OFDM/OQAM mono-usager et nous l adaptons à un scénario de type multi-usagers. 3) Proposition d un schéma d accès multiple : nous proposons un schéma d accès multiple basé sur la modulation OFDM/OQAM, alternatif aux techniques connues OFDMA et SC-FDMA, pour la transmission en liaison montante dans un contexte de type 3GPP/LTE.This thesis is dedicated to the study of the OFDM/OQAM modulation as an alternative to the OFDM modulation. We treat more especially the multi-user environment. In this respect, synchronization aspects are crucial. The different options plus the choice of the waveform are examined in this point of view. Another objective is to precisely show how the OFDM/OQAM can be adapted to a cellular transmission type, taking as reference the 3GPP/LTE system. The main contributions we have made are : 1) Analysis of the desynchronization phenomena : we analyze the effect of desynchronization, according to the time and frequency axes, on the performance of OFDM/OQAM at the receiver side. 2) Synchronization method : we analyze a method of temporal synchronization defined in a single user OFDM/OQAM transmission and we adapt it to a multi-user scenario type. 3) Proposing for a multiple access scheme : we propose a multiple access scheme based on theOFDM/OQAM modulation, alternative to the known techniques OFDMA and SC-FDMA, for the UL transmission in a 3GPP/LTE context.PARIS-CNAM (751032301) / SudocSudocFranceF

MIMO signal processing in offset-QAM based filter bank multicarrier systems

Next-generation communication systems have to comply with very strict requirements for increased flexibility in heterogeneous environments, high spectral efficiency, and agility of carrier aggregation. This fact motivates research in advanced multicarrier modulation (MCM) schemes, such as filter bank-based multicarrier (FBMC) modulation. This paper focuses on the offset quadrature amplitude modulation (OQAM)-based FBMC variant, known as FBMC/OQAM, which presents outstanding spectral efficiency and confinement in a number of channels and applications. Its special nature, however, generates a number of new signal processing challenges that are not present in other MCM schemes, notably, in orthogonal-frequency-division multiplexing (OFDM). In multiple-input multiple-output (MIMO) architectures, which are expected to play a primary role in future communication systems, these challenges are intensified, creating new interesting research problems and calling for new ideas and methods that are adapted to the particularities of the MIMO-FBMC/OQAM system. The goal of this paper is to focus on these signal processing problems and provide a concise yet comprehensive overview of the recent advances in this area. Open problems and associated directions for future research are also discussed.Peer ReviewedPostprint (author's final draft