Axial compressor middle stage secondary flow study

This report describes an experimental investigation of the secondary flow within and aft of an axial compressor model with thick endwall boundary layers. The objective of the study was to obtain detailed aerodynamic and trace gas concentration traverse data aft of a well documented isolated rotor for the ultimate purpose of improving the design phases of compressor development based on an improved physical understanding of secondary flow. It was determined from the flow visualization, aerodynamic, and trace gas concentration results that the relative unloading of the midspan region of the airfoil inhibitied a fullspan separation at high loading preventing the massive radial displacement of the hub corner stall to the tip. Radial distribution of high and low total pressure fluid influenced the magnitude of the spanwise distribution of loss, such that, there was a general decreases in loss near the hub to the extent that for the least loaded case a negative loss (increase in total pressure) was observed. The ability to determine the spanwise distribution of blockage was demonstrated. Large blockage was present in the endwall regions due to the corner stall and tip leakage with little blockage in the core flow region. Hub blockage was found to increase rapidly with loading

Layout regularity metric as a fast indicator of process variations

Integrated circuits design faces increasing challenge as we scale down due to the increase of the effect of sensitivity to process variations. Systematic variations induced by different steps in the lithography process affect both parametric and functional yields of the designs. These variations are known, themselves, to be affected by layout topologies. Design for Manufacturability (DFM) aims at defining techniques that mitigate variations and improve yield. Layout regularity is one of the trending techniques suggested by DFM to mitigate process variations effect. There are several solutions to create regular designs, like restricted design rules and regular fabrics. These regular solutions raised the need for a regularity metric. Metrics in literature are insufficient for different reasons; either because they are qualitative or computationally intensive. Furthermore, there is no study relating either lithography or electrical variations to layout regularity. In this work, layout regularity is studied in details and a new geometrical-based layout regularity metric is derived. This metric is verified against lithographic simulations and shows good correlation. Calculation of the metric takes only few minutes on 1mm x 1mm design, which is considered fast compared to the time taken by simulations. This makes it a good candidate for pre-processing the layout data and selecting certain areas of interest for lithographic simulations for faster throughput. The layout regularity metric is also compared against a model that measures electrical variations due to systematic lithographic variations. The validity of using the regularity metric to flag circuits that have high variability using the developed electrical variations model is shown. The regularity metric results compared to the electrical variability model results show matching percentage that can reach 80%, which means that this metric can be used as a fast indicator of designs more susceptible to lithography and hence electrical variations

The Layer 0 Inner Silicon Detector of the D0 Experiment

This paper describes the design, fabrication, installation and performance of the new inner layer called Layer 0 (L0) that was inserted in the existing Run IIa Silicon Micro-Strip Tracker (SMT) of the D0 experiment at the Fermilab Tevatron collider. L0 provides tracking information from two layers of sensors, which are mounted with center lines at a radial distance of 16.1 mm and 17.6 mm respectively from the beam axis. The sensors and readout electronics are mounted on a specially designed and fabricated carbon fiber structure that includes cooling for sensor and readout electronics. The structure has a thin polyimide circuit bonded to it so that the circuit couples electrically to the carbon fiber allowing the support structure to be used both for detector grounding and a low impedance connection between the remotely mounted hybrids and the sensors.Comment: 28 pages, 9 figure

DFM Techniques for the Detection and Mitigation of Hotspots in Nanometer Technology

With the continuous scaling down of dimensions in advanced technology nodes, process variations are getting worse for each new node. Process variations have a large influence on the quality and yield of the designed and manufactured circuits. There is a growing need for fast and efficient techniques to characterize and mitigate the effects of different sources of process variations on the design's performance and yield. In this thesis we have studied the various sources of systematic process variations and their effects on the circuit, and the various methodologies to combat systematic process variation in the design space. We developed abstract and accurate process variability models, that would model systematic intra-die variations. The models convert the variation in process into variation in electrical parameters of devices and hence variation in circuit performance (timing and leakage) without the need for circuit simulation. And as the analysis and mitigation techniques are studied in different levels of the design ow, we proposed a flow for combating the systematic process variation in nano-meter CMOS technology. By calculating the effects of variability on the electrical performance of circuits we can gauge the importance of the accurate analysis and model-driven corrections. We presented an automated framework that allows the integration of circuit analysis with process variability modeling to optimize the computer intense process simulation steps and optimize the usage of variation mitigation techniques. And we used the results obtained from using this framework to develop a relation between layout regularity and resilience of the devices to process variation. We used these findings to develop a novel technique for fast detection of critical failures (hotspots) resulting from process variation. We showed that our approach is superior to other published techniques in both accuracy and predictability. Finally, we presented an automated method for fixing the lithography hotspots. Our method showed success rate of 99% in fixing hotspots

Regular cell design approach considering lithography-induced process variations

The deployment delays for EUVL, forces IC design to continue using 193nm wavelength lithography with innovative and costly techniques in order to faithfully print sub-wavelength features and combat lithography induced process variations. The effect of the lithography gap in current and upcoming technologies is to cause severe distortions due to optical diffraction in the printed patterns and thus degrading manufacturing yield. Therefore, a paradigm shift in layout design is mandatory towards more regular litho-friendly cell designs in order to improve line pattern resolution. However, it is still unclear the amount of layout regularity that can be introduced and how to measure the benefits and weaknesses of regular layouts. This dissertation is focused on searching the degree of layout regularity necessary to combat lithography variability and outperform the layout quality of a design. The main contributions that have been addressed to accomplish this objective are: (1) the definition of several layout design guidelines to mitigate lithography variability; (2) the proposal of a parametric yield estimation model to evaluate the lithography impact on layout design; (3) the development of a global Layout Quality Metric (LQM) including a Regularity Metric (RM) to capture the degree of layout regularity of a layout implementation and; (4) the creation of different layout architectures exploiting the benefits of layout regularity to outperform line-pattern resolution, referred as Adaptive Lithography Aware Regular Cell Designs (ALARCs). The first part of this thesis provides several regular layout design guidelines derived from lithography simulations so that several important lithography related variation sources are minimized. Moreover, a design level methodology, referred as gate biasing, is proposed to overcome systematic layout dependent variations, across-field variations and the non-rectilinear gate effect (NRG) applied to regular fabrics by properly configuring the drawn transistor channel length. The second part of this dissertation proposes a lithography yield estimation model to predict the amount of lithography distortion expected in a printed layout due to lithography hotspots with a reduced set of lithography simulations. An efficient lithography hotspot framework to identify the different layout pattern configurations, simplify them to ease the pattern analysis and classify them according to the lithography degradation predicted using lithography simulations is presented. The yield model is calibrated with delay measurements of a reduced set of identical test circuits implemented in a CMOS 40nm technology and thus actual silicon data is utilized to obtain a more realistic yield estimation. The third part of this thesis presents a configurable Layout Quality Metric (LQM) that considering several layout aspects provides a global evaluation of a layout design with a single score. The LQM can be leveraged by assigning different weights to each evaluation metric or by modifying the parameters under analysis. The LQM is here configured following two different set of partial metrics. Note that the LQM provides a regularity metric (RM) in order to capture the degree of layout regularity applied in a layout design. Lastly, this thesis presents different ALARC designs for a 40nm technology using different degrees of layout regularity and different area overheads. The quality of the gridded regular templates is demonstrated by automatically creating a library containing 266 cells including combinational and sequential cells and synthesizing several ITC'99 benchmark circuits. Note that the regular cell libraries only presents a 9\% area penalty compared to the 2D standard cell designs used for comparison and thus providing area competitive designs. The layout evaluation of benchmark circuits considering the LQM shows that regular layouts can outperform other 2D standard cell designs depending on the layout implementation.Los continuos retrasos en la implementación de la EUVL, fuerzan que el diseño de IC se realice mediante litografía de longitud de onda de 193 nm con innovadoras y costosas técnicas para poder combatir variaciones de proceso de litografía. La gran diferencia entre la longitud de onda y el tamaño de los patrones causa severas distorsiones debido a la difracción óptica en los patrones impresos y por lo tanto degradando el yield. En consecuencia, es necesario realizar un cambio en el diseño de layouts hacia diseños más regulares para poder mejorar la resolución de los patrones. Sin embargo, todavía no está claro el grado de regularidad que se debe introducir y como medir los beneficios y los perjuicios de los diseños regulares. El objetivo de esta tesis es buscar el grado de regularidad necesario para combatir las variaciones de litografía y mejorar la calidad del layout de un diseño. Las principales contribuciones para conseguirlo son: (1) la definición de diversas reglas de diseño de layout para mitigar las variaciones de litografía; (2) la propuesta de un modelo para estimar el yield paramétrico y así evaluar el impacto de la litografía en el diseño de layout; (3) el diseño de una métrica para analizar la calidad de un layout (LQM) incluyendo una métrica para capturar el grado de regularidad de un diseño (RM) y; (4) la creación de diferentes tipos de layout explotando los beneficios de la regularidad, referidos como Adaptative Lithography Aware Regular Cell Designs (ALARCs). La primera parte de la tesis, propone las diversas reglas de diseño para layouts regulares derivadas de simulaciones de litografía de tal manera que las fuentes de variación de litografía son minimizadas. Además, se propone una metodología de diseño para layouts regulares, referida como "gate biasing" para contrarrestar las variaciones sistemáticas dependientes del layout, las variaciones en la ventana de proceso del sistema litográfico y el efecto de puerta no rectilínea para configurar la longitud del canal del transistor correctamente. La segunda parte de la tesis, detalla el modelo de estimación del yield de litografía para predecir mediante un número reducido de simulaciones de litografía la cantidad de distorsión que se espera en un layout impreso debida a "hotspots". Se propone una eficiente metodología que identifica los distintos patrones de un layout, los simplifica para facilitar el análisis de los patrones y los clasifica en relación a la degradación predecida mediante simulaciones de litografía. El modelo de yield se calibra utilizando medidas de tiempo de un número reducido de idénticos circuitos de test implementados en una tecnología CMOS de 40nm y de esta manera, se utilizan datos de silicio para obtener una estimación realista del yield. La tercera parte de este trabajo, presenta una métrica para medir la calidad del layout (LQM), que considera diversos aspectos para dar una evaluación global de un diseño mediante un único valor. La LQM puede ajustarse mediante la asignación de diferentes pesos para cada métrica de evaluación o modificando los parámetros analizados. La LQM se configura mediante dos conjuntos de medidas diferentes. Además, ésta incluye una métrica de regularidad (RM) para capturar el grado de regularidad que se aplica en un diseño. Finalmente, esta disertación presenta los distintos diseños ALARC para una tecnología de 40nm utilizando diversos grados de regularidad y diferentes impactos en área. La calidad de estos diseños se demuestra creando automáticamente una librería de 266 celdas incluyendo celdas combinacionales y secuenciales y, sintetizando diversos circuitos ITC'99. Las librerías regulares solo presentan un 9% de impacto en área comparado con diseños de celdas estándar 2D y por tanto proponiendo diseños competitivos en área. La evaluación de los circuitos considerando la LQM muestra que los diseños regulares pueden mejorar otros diseños 2D dependiendo de la implementación del layout

Thermal Investigations Of Flip Chip Microelectronic Package With Non-Uniform Power Distribution [TK7874. G614 2004 f rb] [Microfiche 7607].

Arah aliran pempakejan sistem-sistem dan subsistem mikroelektronik adalah kearah pengurangan saiz dan peningkatan prestasi, di mana kedua-duanya menyumbang kepada peningkatan kadar penjanaan haba. The trend in packaging microelectronic systems and subsystems has been to reduce size and increase performance, both of which contribute to increase heat generation

Optimum Design of Axial Flux PM Machines based on Electromagnetic 3D FEA

Axial flux permanent magnet (AFPM) machines have recently attracted significant attention due to several reasons, such as their specific form factor, potentially higher torque density and lower losses, feasibility of increasing the number of poles, and facilitating innovative machine structures for emerging applications. One such machine design, which has promising, high efficiency particularly at higher speeds, is of the coreless AFPM type and has been studied in the dissertation together with more conventional AFPM topologies that employ a ferromagnetic core. A challenge in designing coreless AFPM machines is estimating the eddy current losses. This work proposes a new hybrid analytical and numerical finite element (FE) based method for calculating ac eddy current losses in windings and demonstrates its applicability for axial flux electric machines. The method takes into account 3D field effects in order to achieve accurate results and yet greatly reduce computational efforts. It is also shown that hybrid methods based on 2D FE models, which require semi-empirical correction factors, may over-estimate the eddy current losses. The new 3D FE-based method is advantageous as it employs minimum simplifications and considers the end turns in the eddy current path, the magnetic flux density variation along the effective length of coils, and the field fringing and leakage, which ultimately increases the accuracy of simulations. After exemplifying the practice and benefits of employing a combined design of experiments and response surface methodology for the comparative design of coreless and conventional AFPM machines with cores, an innovative approach is proposed for integrated design, prototyping, and testing efforts. It is shown that extensive sensitivity analysis can be utilized to systematically study the manufacturing tolerances and identify whether the causes for out of specification performance are detectable. The electromagnetic flux path in AFPM machines is substantially 3D and cannot be satisfactorily analyzed through simplified 2D simulations, requiring laborious 3D models for performance prediction. The use of computationally expensive 3D models becomes even more challenging for optimal design studies, in which case, thousands of candidate design evaluations are required, making the conventional approaches impractical. In this dissertation a new two-level surrogate assisted differential evolution multi-objective optimization algorithm (SAMODE) is developed in order to optimally and accurately design the electric machine with a minimum number of expensive 3D design evaluations. The developed surrogate assisted optimization algorithm is used to comparatively and systematically design several AFPM machines. The studies include exploring the effects of pole count on the machine performance and cost limits, and the systematic comparison of optimally designed single-sided and double-sided AFPM machines. For the case studies, the new optimization algorithm reduced the required number of FEA design evaluations from thousands to less than two hundred. The new methods, developed and presented in the dissertation, maybe directly applicable or extended to a wide class of electrical machines and in particular to those of the PM-excited synchronous type. The benefits of the new eddy current loss calculation and of the optimization method are mostly relevant and significant for electrical machines with a rather complicated magnetic flux path, such is the case of axial flux and of transvers flux topologies, which are a main subject of current research in the field worldwide

On Regularity and Integrated DFM Metrics

Transistor geometries are well into the nanometer regime, keeping with Moore's Law. With this scaling in geometry, problems not significant in the larger geometries have come to the fore. These problems, collectively termed variability, stem from second-order effects due to the small geometries themselves and engineering limitations in creating the small geometries. The engineering obstacles have a few solutions which are yet to be widely adopted due to cost limitations in deploying them. Addressing and mitigating variability due to second-order effects comes largely under the purview of device engineers and to a smaller extent, design practices. Passive layout measures that ease these manufacturing limitations by regularizing the different layout pitches have been explored in the past. However, the question of the best design practice to combat systematic variations is still open. In this work we explore considerations for the regular layout of the exclusive-OR gate, the half-adder and full-adder cells implemented with varying degrees of regularity. Tradeoffs like complete interconnect unidirectionality, and the inevitable introduction of vias are qualitatively analyzed and some factors affecting the analysis are presented. Finally, results from the Calibre Critical Feature Analysis (CFA) of the cells are used to evaluate the qualitative analysis

Improved Physical Design for Manufacturing Awareness and Advanced VLSI

Increasing challenges arise with each new semiconductor technology node, especially in advanced nodes, where the industry tries to extract every ounce of benefit as it approaches the limits of physics, through manufacturing-aware design technology co-optimization and design-based equivalent scaling. The increasing complexity of design and process technologies, and ever-more complex design rules, also become hurdles for academic researchers, separating academic researchers from the most up-to-date technical issues.This thesis presents innovative methodologies and optimizations to address the above challenges. There are three directions in this thesis: (i) manufacturing-aware design technology co-optimization; (ii) advanced node design-based equivalent scaling; and (iii) an open source academic detailed routing flow.To realize manufacturing-aware design technology co-optimization, this thesis presents two works: (i) a multi-row detailed placement optimization for neighbor diffusion effect mitigation between neighboring standard cells; and (ii) a post-routing optimization to generate 2D block mask layout for dummy segment removal in self-aligned multiple patterning.To achieve advanced node design-based equivalent scaling, this thesis presents two improved physical design methodologies: (i) a post-placement flop tray generation approach for clock power reduction; and (ii) a detailed placement approach to exploit inter-row M1 routing for congestion and wirelength reduction.To address the increasing gap between academia and industry, this thesis presents two works toward an open source academic detailed routing flow: (i) a complete, robust, scalable and design ruleaware dynamic programming-based pin access analysis framework; and (ii) TritonRoute – the open source detailed router that is capable of delivering DRC-clean detailed routing solutions in advanced nodes.This thesis concludes with a summary of its contributions and open directions for future research

A novel deep submicron bulk planar sizing strategy for low energy subthreshold standard cell libraries

Engineering andPhysical Science ResearchCouncil (EPSRC) and Arm Ltd for providing funding in the form of grants and studentshipsThis work investigates bulk planar deep submicron semiconductor physics in an attempt to improve standard cell libraries aimed at operation in the subthreshold regime and in Ultra Wide Dynamic Voltage Scaling schemes. The current state of research in the field is examined, with particular emphasis on how subthreshold physical effects degrade robustness, variability and performance. How prevalent these physical effects are in a commercial 65nm library is then investigated by extensive modeling of a BSIM4.5 compact model. Three distinct sizing strategies emerge, cells of each strategy are laid out and post-layout parasitically extracted models simulated to determine the advantages/disadvantages of each. Full custom ring oscillators are designed and manufactured. Measured results reveal a close correlation with the simulated results, with frequency improvements of up to 2.75X/2.43X obs erved for RVT/LVT devices respectively. The experiment provides the first silicon evidence of the improvement capability of the Inverse Narrow Width Effect over a wide supply voltage range, as well as a mechanism of additional temperature stability in the subthreshold regime. A novel sizing strategy is proposed and pursued to determine whether it is able to produce a superior complex circuit design using a commercial digital synthesis flow. Two 128 bit AES cores are synthesized from the novel sizing strategy and compared against a third AES core synthesized from a state-of-the-art subthreshold standard cell library used by ARM. Results show improvements in energy-per-cycle of up to 27.3% and frequency improvements of up to 10.25X. The novel subthreshold sizing strategy proves superior over a temperature range of 0 °C to 85 °C with a nominal (20 °C) improvement in energy-per-cycle of 24% and frequency improvement of 8.65X. A comparison to prior art is then performed. Valid cases are presented where the proposed sizing strategy would be a candidate to produce superior subthreshold circuits