116,989 research outputs found
An introductory digital design course using a low–cost autonomous robot
This paper describes a new digital design laboratory developed for undergraduate students in this electrical and computer engineering curriculum. A top-down rapid prototyping approach with commercial computer-aided design tools and field-programmable logic devices (FPLDs) is used for laboratory projects. Students begin with traditional transistor–transistor logic-based projects containing a few gates and progress to designing a simple 16-bit computer, using very high-speed integrated circuits hardware description language (VHDL) synthesis tools and an FPLD. To help motivate students, the simple computer design is programmed to control a small autonomous robot with two servo drive motors and several sensors. The laboratory concludes with a team-based design project using the robot
Designing Circuits Basic Input with Ppi Brokerage 8255 Using C Language
Series "Designing circuits Basic Input With PPI 8255 Intermediary Language Using C", is a series composed of PCs, interface 8255, and a series of basic input modules that are interconnected with one another. 8255 PPI servesto mediate between the computer with a basic set of inputs. This circuit is used to enter data in the form of binary numbers and output can then be viewed on a computer screen in the form of decimals. For data processing in this circuit using the languageC
A knowledge-based approach to VLSI-design in an open CAD-environment
A knowledge-based approach is suggested to assist a designer in the increasingly complex task of generating VLSI-chips from abstract, high-level specifications of the system. The complexity of designing VLSI-circuits has reached a level where computer-based assistance has become indispensable. Not all of the design tasks allow for algorithmic solutions. AI technique can be used, in order to support the designer with computer-aided tools for tasks not suited for algorithmic approaches. The approach described in this paper is based upon the underlying characteristics of VLSI design processes in general, comprising all stages of the design. A universal model is presented, accompanied with a recording method for the acquisition of design knowledge - strategic and task-specific - in terms of the design actions involved and their effects on the design itself. This method is illustrated by a simple design example: the implementation of the logical EXOR-component. Finally suggestions are made for obtaining a universally usable architecture of a knowledge-based system for VLSI-design
A Survey of Digital Systems Curriculum and Pedagogy in Electrical and Computer Engineering Programs
Digital Systems is one of the basic foundational courses in Electrical and Computer Engineering. One of the challenges in designing and modifying the curriculum for the course is the fast pace of technology change in the area. TTL chips that were in vogue with students building physical circuits, have given way to new paradigms like FPGA based synthesis with hardware description languages such as VHDL. However, updating a course is not as simple as just changing the book, and changing the syllabus. A large amount of work needs to be done in terms of selecting the book that will accommodate the course, the device that should be used, the laboratory content, and even how much time needs to be dedicated for every topic. All these issues, and many more makes it hard to take the decision of updating the course. For that reason, this paper surveys the pedagogy and methodology that is used to teach the digital systems curriculum at different universities. The goal is that it will serve as a resource for faculty looking to update or revamp their digital systems curricula. Within the document they will find a comparative study by electrical and computer engineering program, a list of textbooks, and the devices most commonly used.Cockrell School of Engineerin
Fluigi: an end-to-end software workflow for microfluidic design
One goal of synthetic biology is to design and build genetic circuits in living cells for a range of applications with implications in health, materials, and sensing. Computational design methodologies allow for increased performance and reliability of these circuits. Major challenges that remain include increasing the scalability and robustness of engineered biological systems and streamlining and automating the synthetic biology workflow of “specify-design-build-test.”
I summarize the advances in microfluidic technology, particularly microfluidic large scale integration, that can be used to address the challenges facing each step of the synthetic biology workflow for genetic circuits. Microfluidic technologies allow precise control over the flow of biological content within microscale devices, and thus may provide more reliable and scalable construction of synthetic biological systems. However, adoption of microfluidics for synthetic biology has been slow due to the expert knowledge and equipment needed to fabricate and control devices. I present an end-to-end workflow for a
computer-aided-design (CAD) tool, Fluigi, for designing microfluidic devices and for integrating biological Boolean genetic circuits with microfluidics. The workflow starts with a ``netlist" input describing the connectivity of microfluidic device to be designed, and proceeds through placement, routing, and design rule checking in a process analogous to electronic computer aided design (CAD). The output is an image of the device for printing as a mask for photolithography or for computer numerical control (CNC) machining. I also introduced a second workflow to allocate biological circuits to microfluidic devices and to generate the valve control scheme to enable biological computation on the device.
I used the CAD workflow to generate 15 designs including gradient generators, rotary pumps, and devices for housing biological circuits. I fabricated two designs, a gradient generator with CNC machining and a device for computing a biological XOR function with multilayer soft lithography, and verified their functions with dye. My efforts here show a first end-to-end demonstration of an extensible and foundational microfluidic CAD tool from design concept to fabricated device. This work provides a platform that when completed will automatically synthesize high level functional and performance specifications into fully realized microfluidic hardware, control software, and synthetic biological wetware
Design Broad Bandwidth Microwave Bandpass Filter Of 10 Ghz Operating Frequency Using HFSS
Microwave bandpass filter is the essential part in microwave circuits and wireless communication systems. This paper presents a new designing and simulation of broad bandwidth,low losses microwave bandpass filter operating at 10 GHz frequency using return loss method. The designing and simulation of the circuit has been carried out using Computer Aid Design (CAD) Ansoft HFSS software purchase from Ansys. The microwave filter circuit has designed with a parallel coupled line having a small dimension (10 Ă— 10 mm2) of LaAlO3 substrate. The microwave circuit showed a high return loss -20 dB, broad bandwidth of 1.5 GHz, and operating frequency at 10 GHz. The results indicate the filter design and simulation using HFSS is reliable and have the opportunity to transfer from lab potential experiments to industry
Recommended from our members
Flexible In-Ga-Zn-O based circuits with two and three metal layers: simulation and fabrication study
The quest for high-performance flexible circuits call for scaling of the minimum feature size in Thin-Film Transistors (TFTs). Although reduced channel lengths can guarantee an improvement in the electrical properties of the devices, proper design rules also play a crucial role to minimize parasitics when designing fast circuits. In this letter, systematic Computer-Aided Design (CAD) simulations have guided the fabrication of highperformance flexible operational amplifiers (opamps) and logic circuits based on Indium-Gallium-Zinc-Oxide (IGZO) TFTs. In particular, the performance improvements due to the use of an additional third metal layer for the interconnections has been estimated for the first time. Encouraged by the simulated enhancements resulting by the decreased parasitic resistances and capacitances, both TFTs and circuits have been realized on a free-standing 50ÎĽm thick polymide foil using three metal layers. Despite the thicker layer stack, the TFTs have shown mechanical stability down to 5mm bending radii. Moreover, the opamps and the logic circuits have yielded improved electrical performance with respect to the architecture with two metal layers: gainbandwidth- product (GBWP) increased by 16:9%, for the first one, and propagation delay (tpd) decreased by 43%, for the latter one
- …