535,633 research outputs found
Development of new all-optical signal regeneration technique
All-optical signal regeneration have been the active research area since last decade due to evolution of nonlinear optical signal processing. Existing all-optical signal regeneration techniques are agitated in producing low Bit Error Rate (BER) of 10-10 at below than -10 dBm power received. In this paper, a new all-optical signal regeneration technique is developed by using phase sensitive amplification and designed optical phase locked signal mechanism. The developed all-optical signal regeneration technique is tested for different 10 Gb/s Differential Phase Shift Keying degraded signals. It is determined that the designed all-optical signal regeneration technique is able to provide signal regeneration with noise mitigation for degraded signals. It is analyzed that overall, for all degraded test signals, average BER of 10-13 is achieved at received power of -14 dBm. The designed technique will be helpful to enhance the performance of existing signal regeneration systems in the presence of severe noise by providing minimum BER at low received power
Improved method of optical design
Optical system designed by third order aberration theory is significantly improved by placing it into a ray deviation design program composed of two distinct computer programs. Tests were conducted on telescope systems, an ultraviolet relay lens, and a four lens corrector system
Recommended from our members
Inverse-designed diamond photonics
Diamond hosts optically active color centers with great promise in quantum computation, networking, and sensing. Realization of such applications is contingent upon the integration of color centers into photonic circuits. However, current diamond quantum optics experiments are restricted to single devices and few quantum emitters because fabrication constraints limit device functionalities, thus precluding color center integrated photonic circuits. In this work, we utilize inverse design methods to overcome constraints of cutting-edge diamond nanofabrication methods and fabricate compact and robust diamond devices with unique specifications. Our design method leverages advanced optimization techniques to search the full parameter space for fabricable device designs. We experimentally demonstrate inverse-designed photonic free-space interfaces as well as their scalable integration with two vastly different devices: classical photonic crystal cavities and inverse-designed waveguide-splitters. The multi-device integration capability and performance of our inverse-designed diamond platform represents a critical advancement toward integrated diamond quantum optical circuits
A New Method for Multi-Bit and Qudit Transfer Based on Commensurate Waveguide Arrays
The faithful state transfer is an important requirement in the construction
of classical and quantum computers. While the high-speed transfer is realized
by optical-fibre interconnects, its implementation in integrated optical
circuits is affected by cross-talk. The cross-talk between densely packed
optical waveguides limits the transfer fidelity and distorts the signal in each
channel, thus severely impeding the parallel transfer of states such as
classical registers, multiple qubits and qudits. Here, we leverage on the
suitably engineered cross-talk between waveguides to achieve the parallel
transfer on optical chip. Waveguide coupling coefficients are designed to yield
commensurate eigenvalues of the array and hence, periodic revivals of the input
state. While, in general, polynomially complex, the inverse eigenvalue problem
permits analytic solutions for small number of waveguides. We present exact
solutions for arrays of up to nine waveguides and use them to design realistic
buses for multi-(qu)bit and qudit transfer. Advantages and limitations of the
proposed solution are discussed in the context of available fabrication
techniques
Solid catadioptric telephoto lens design with SMS method
Two new optical structures are designed using the Simultaneous Multiple Surfaces (SMS) method, comprised of 2 reflecting surfaces and 2 refracting surfaces, 800mm focal length, f/8 (aperture diameter 100 mm) and 1.180 diagonal field of view in the SWIR band. The lens surfaces are rotational symmetric and calculated to have good control of non-paraxial rays. We have achieved designs with excellent performance, and with total system length of less than 60 mm
Planar Large Core Polymer Optical 1x2 and 1x4 Splitters Connectable to Plastic Optical Fiber
We report about new approach to design and fabricate multimode 1 x 2 and 1 x 4 Y optical planar power splitter suitable for low-cost short distance optical network. The splitters were designed by beam propagation method using BeamPROPâą software. The dimensions of the splitters were optimized for connecting standard plastic optical fibre with 1 mm diameter. New Norland Optical Adhesives 1625 glues were used as optical waveguide layers and the design structures were completed by CNC engraving on poly(methyl methacrylate) substrate. The best parameters that were achieved with 1x2 splitter were insertion loss around 4.1dB at 650 nm and the coupling ratio 52:48; the best one of the 1x4 splitters had at 650 nm insertion loss around 17.6 dB
Nanomechanical optical devices fabricated with aligned wafer bonding
This paper reports on a new method for making some types of integrated optical nanomechanical devices. Intensity modulators as well as phase modulators were fabricated using several silicon micromachining techniques, including chemical mechanical polishing and aligned wafer bonding. This new method enables batch fabrication of the nanomechanical optical devices, and enhances their performance
New Optical Splitter Design for Network Scalability and Flexibility
In this paper, we present the design of two optical splitter which are 2x3 optical splitter-combine and Multi Ratio Optical Splitter (MROS) based on waveguide with SU-8 polymer material. The technology ensures low cost fabrication and excellent performance as compared to conventional technique that uses fused coupler for optical splitter fabrication. Both optical splitter-combine and MROS are suggested to be used in passive customer access network FTTH-PON. The optical splitter-combine is used to variety the signals send to the premises and as for MROS, it is used in power management in minimizing the power loss. The problems arose such as the loss of output power is also discussed. The simulation result shows that factor such as wide-angle branching and refractive index will increase the output power loss. To obtain maximum power, the optimization of those parametersĂąâŹâą value must be used. This designed optical splitter is operated at wavelength 1500 nm ĂąâŹâ 1600 nm. In this study, we characterized the trend of total output power with the effect of the parameters studied. Keywords: Optical splitter-combine, Multi Ratio Optical Splitter, waveguide, SU-8 Polymer, parameter
Evalaution and optimization of laser cutting parameters for plywood materials
Laser process parameters influence greatly the width of kerfs and quality of the cut edges. This article reports experiments on the laser plywood-cutting performance of a CW 1.5 kW CO2ÂŹ Rofin laser, based on design of experiments (DOE). The laser was used to cut three thicknesses 3, 6 and 9 mm of plywood panels. The process factors investigated are: laser power, cutting speed, air pressure and focal point position. The aim of this work is to relate the cutting edge quality parameters namely: upper kerf (UK), lower kerf (LK), the ratio between upper to lower kerfs and the operating cost to the process parameters mentioned above. Mathematical models were developed to establish the relationship between the process parameters and the edge quality parameters, and special graphs were drawn for this purpose. Finally, a numerical optimization was performed to find out the optimal process setting at which both kerfs would lead to a ratio of about 1, and at which low cutting cost take place
- âŠ