Gate Delay Fault Test Generation for Non-Scan Circuits

This article presents a technique for the extension of delay fault test pattern generation to synchronous sequential circuits without making use of scan techniques. The technique relies on the coupling of TDgen, a robust combinational test pattern generator for delay faults, and SEMILET, a sequential test pattern generator for several static fault models. The approach uses a forward propagation-backward justification technique: The test pattern generation is started at the fault location, and after successful ¿local¿ test generation fault effect propagation is performed and finally a synchronising sequence to the required state is computed. The algorithm is complete for a robust gate delay fault model, which means that for every testable fault a test will be generated, assuming sufficient time. Experimental results for the ISCAS'89 benchmarks are presented in this pape

Achieve complete robust path delay fault testability

Recently, Pomeranz and Reddy [7], presented a test point insertion method to improve path delay fault testability in large combinational circuits. A test application scheme was developed that allows test points to be utilized as primary inputs and primary outputs during testing. The placement of test points was guided by the number of paths and was aimed at reducing this number. Indirectly, this approach achieved complete robust path delay fault testability in very low computation times. In this paper, we use their test application scheme, however, we use morre exact measures for guiding test point insertion like test generation and RD fault identification. Thus, we reduce the number of test point needed to achieve complete testability by ensuring that test points are inserted only on paths associated with path delay faults that are necessary to be tested and that are not robustly testable. Experimental results show that an average reduction of about 70% in the number of test points over the approach of [7] can be obtained.

Efficient design of CMOS TSC checkers

This paper considers the design of an efficient, robustly testable, CMOS Totally Self-Checking (TSC) Checker for k-out-of-2k codes. Most existing implementations use primitive gates and assume the single stuck-at fault model. The self-testing property has been found to fail for CMOS TSC checkers under the stuck-open fault model due to timing skews and arbitrary delays in the circuit. A new four level design using CMOS primitive gates (NAND, NOR, INVERTERS) is presented. This design retains its properties under the stuck-open fault model. Additionally, this method offers an impressive reduction (greater than 70 percent) in gate count, gate inputs, and test set size when compared to the existing method. This implementation is easily realizable and is based on Anderson's technique. A thorough comparative study has been made on the proposed implementation and Kundu's implementation and the results indicate that the proposed one is better than Kundu's in all respects for k-out-of-2k codes

Testability enhancement of a basic set of CMOS cells

Testing should be evaluated as the ability of the test patterns to cover realistic faults, and high quality IC products demand high quality testing. We use a test strategy based on physical design for testability (to discover both open and short faults, which are difficult or even impossible to detect). Consequentially, layout level design for testability (LLDFT) rules have been developed, which prevent the faults, or at least reduce the chance of their appearing. The main purpose of this work is to apply a practical set of LLDFT rules to the library cells designed by the Centre Nacional de Microelectrònica (CNM) and obtain a highly testable cell library. The main results of the application of the LLDFT rules (area overheads and performance degradation) are summarized and the results are significant since IC design is highly repetitive; a small effort to improve cell layout can bring about great improvement in design

Custom Integrated Circuits

Contains reports on nine research projects.Analog Devices, Inc.International Business Machines CorporationJoint Services Electronics Program Contract DAAL03-89-C-0001U.S. Air Force - Office of Scientific Research Contract AFOSR 86-0164BDuPont CorporationNational Science Foundation Grant MIP 88-14612U.S. Navy - Office of Naval Research Contract N00014-87-K-0825American Telephone and TelegraphDigital Equipment CorporationNational Science Foundation Grant MIP 88-5876

Custom Integrated Circuits

Contains reports on ten research projects.Analog Devices, Inc.IBM CorporationNational Science Foundation/Defense Advanced Research Projects Agency Grant MIP 88-14612Analog Devices Career Development Assistant ProfessorshipU.S. Navy - Office of Naval Research Contract N0014-87-K-0825AT&TDigital Equipment CorporationNational Science Foundation Grant MIP 88-5876

Testing micropipelines

Journal ArticleMicropipelines, self-timed event-driven pipelines, are an attractive way of structuring asynchronous systems that exhibit many of the advantages of general asynchronous systems, but enough structure to make the design of significant systems practical. As with any design method, testing is critical. We present a technique for testing self-timed micropipelines for stuck-at faults and for delay faults an the bundled data paths by modifying the latch and control elements to include a built-in scan path for testing. This scan path allows the processing logic in the micropipeline, to be fully tested with only a small overhead in the latch and control circuits. The test method is very similar to scan testing in synchronous systems, but the micropipeline retains its self-timed behavior during normal operation

Fault simulation and test generation for small delay faults

Delay faults are an increasingly important test challenge. Traditional delay fault models are incomplete in that they model only a subset of delay defect behaviors. To solve this problem, a more realistic delay fault model has been developed which models delay faults caused by the combination of spot defects and parametric process variation. According to the new model, a realistic delay fault coverage metric has been developed. Traditional path delay fault coverage metrics result in unrealistically low fault coverage, and the real test quality is not reflected. The new metric uses a statistical approach and the simulation based fault coverage is consistent with silicon data. Fast simulation algorithms are also included in this dissertation. The new metric suggests that testing the K longest paths per gate (KLPG) has high detection probability for small delay faults under process variation. In this dissertation, a novel automatic test pattern generation (ATPG) methodology to find the K longest testable paths through each gate for both combinational and sequential circuits is presented. Many techniques are used to reduce search space and CPU time significantly. Experimental results show that this methodology is efficient and able to handle circuits with an exponential number of paths, such as ISCAS85 benchmark circuit c6288. The ATPG methodology has been implemented on industrial designs. Speed binning has been done on many devices and silicon data has shown significant benefit of the KLPG test, compared to several traditional delay test approaches