Predictive control and estimation algorithms for the NASA/JPL 70-meter antennas

A modified output prediction procedure and a new controller design is presented based on the predictive control law. Also, a new predictive estimator is developed to complement the controller and to enhance system performance. The predictive controller is designed and applied to the tracking control of the Deep Space Network 70 m antennas. Simulation results show significant improvement in tracking performance over the linear quadratic controller and estimator presently in use

State-Space Interpretation of Model Predictive Control

A model predictive control technique based on a step response model is developed using state estimation techniques. The standard step response model is extended so that integrating systems can be treated within the same framework. Based on the modified step response model, it is shown how the state estimation techniques from stochastic optimal control can be used to construct the optimal prediction vector without introducing significant additional numerical complexity. In the case of integrated or double integrated white noise disturbances filtered through general first-order dynamics and white measurement noise, the optimal filter gain is parametrized explicitly in terms of a single parameter between 0 and 1, thus removing the requirement for solving a Riccati equation and equipping the control system with useful on-line tuning parameters. Parallels are drawn to the existing MPC techniques such as Dynamic Matrix Control (DMC), Internal Model Control (IMC) and Generalized Predictive Control (GPC)

Nonminimal state space approach to multivariable ramp metering control of motorway bottlenecks

The paper discusses the automatic control of motorway traffic flows utilising ramp metering, i.e. traffic lights on the on-ramp entrances. A multivariable ramp metering system is developed, based on the nonminimal state space (NMSS) approach to control system design using adaptive proportional-integral-plus, linear quadratic (PIP–LQ) optimal controllers. The controller is evaluated on a nonlinear statistical traffic model (STM) simulation of the Amsterdam motorway ring road near the Coen Tunnel

Feedback MPC for Torque-Controlled Legged Robots

The computational power of mobile robots is currently insufficient to achieve torque level whole-body Model Predictive Control (MPC) at the update rates required for complex dynamic systems such as legged robots. This problem is commonly circumvented by using a fast tracking controller to compensate for model errors between updates. In this work, we show that the feedback policy from a Differential Dynamic Programming (DDP) based MPC algorithm is a viable alternative to bridge the gap between the low MPC update rate and the actuation command rate. We propose to augment the DDP approach with a relaxed barrier function to address inequality constraints arising from the friction cone. A frequency-dependent cost function is used to reduce the sensitivity to high-frequency model errors and actuator bandwidth limits. We demonstrate that our approach can find stable locomotion policies for the torque-controlled quadruped, ANYmal, both in simulation and on hardware.Comment: Paper accepted to IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2019

Intermittent control models of human standing: similarities and differences

Two architectures of intermittent control are compared and contrasted in the context of the single inverted pendulum model often used for describing standing in humans. The architectures are similar insofar as they use periods of open-loop control punctuated by switching events when crossing a switching surface to keep the system state trajectories close to trajectories leading to equilibrium. The architectures differ in two significant ways. Firstly, in one case, the open-loop control trajectory is generated by a system-matched hold, and in the other case, the open-loop control signal is zero. Secondly, prediction is used in one case but not the other. The former difference is examined in this paper. The zero control alternative leads to periodic oscillations associated with limit cycles; whereas the system-matched control alternative gives trajectories (including homoclinic orbits) which contain the equilibrium point and do not have oscillatory behaviour. Despite this difference in behaviour, it is further shown that behaviour can appear similar when either the system is perturbed by additive noise or the system-matched trajectory generation is perturbed. The purpose of the research is to come to a common approach for understanding the theoretical properties of the two alternatives with the twin aims of choosing which provides the best explanation of current experimental data (which may not, by itself, distinguish beween the two alternatives) and suggesting future experiments to distinguish between the two alternatives

A cascade MPC control structure for PMSM with speed ripple minimization

This paper addresses the problem of reducing the impact of periodic disturbances arising from the current sensor offset error on the speed control of a PMSM. The new results are based on a cascade model predictive control scheme with embedded disturbance model, where the per unit model is utilized to improve the numerical condition of the scheme. Results from an experimental application are given to support the design

A Family of Iterative Gauss-Newton Shooting Methods for Nonlinear Optimal Control

This paper introduces a family of iterative algorithms for unconstrained nonlinear optimal control. We generalize the well-known iLQR algorithm to different multiple-shooting variants, combining advantages like straight-forward initialization and a closed-loop forward integration. All algorithms have similar computational complexity, i.e. linear complexity in the time horizon, and can be derived in the same computational framework. We compare the full-step variants of our algorithms and present several simulation examples, including a high-dimensional underactuated robot subject to contact switches. Simulation results show that our multiple-shooting algorithms can achieve faster convergence, better local contraction rates and much shorter runtimes than classical iLQR, which makes them a superior choice for nonlinear model predictive control applications.Comment: 8 page