Fractional biorthogonal partners in channel equalization and signal interpolation

The concept of biorthogonal partners has been introduced recently by the authors. The work presented here is an extension of some of these results to the case where the upsampling and downsampling ratios are not integers but rational numbers, hence, the name fractional biorthogonal partners. The conditions for the existence of stable and of finite impulse response (FIR) fractional biorthogonal partners are derived. It is also shown that the FIR solutions (when they exist) are not unique. This property is further explored in one of the applications of fractional biorthogonal partners, namely, the fractionally spaced equalization in digital communications. The goal is to construct zero-forcing equalizers (ZFEs) that also combat the channel noise. The performance of these equalizers is assessed through computer simulations. Another application considered is the all-FIR interpolation technique with the minimum amount of oversampling required in the input signal. We also consider the extension of the least squares approximation problem to the setting of fractional biorthogonal partners

Models for learning reverberant environments

Reverberation is present in all real life enclosures. From our workplaces to our homes and even in places designed as auditoria, such as concert halls and theatres. We have learned to understand speech in the presence of reverberation and also to use it for aesthetics in music. This thesis investigates novel ways enabling machines to learn the properties of reverberant acoustic environments. Training machines to classify rooms based on the effect of reverberation requires the use of data recorded in the room. The typical data for such measurements is the Acoustic Impulse Response (AIR) between the speaker and the receiver as a Finite Impulse Response (FIR) filter. Its representation however is high-dimensional and the measurements are small in number, which limits the design and performance of deep learning algorithms. Understanding properties of the rooms relies on the analysis of reflections that compose the AIRs and the decay and absorption of the sound energy in the room. This thesis proposes novel methods for representing the early reflections, which are strong and sparse in nature and depend on the position of the source and the receiver. The resulting representation significantly reduces the coefficients needed to represent the AIR and can be combined with a stochastic model from the literature to also represent the late reflections. The use of Finite Impulse Response (FIR) for the task of classifying rooms is investigated, which provides novel results in this field. The aforementioned issues related to AIRs are highlighted through the analysis. This leads to the proposal of a data augmentation method for the training of the classifiers based on Generative Adversarial Networks (GANs), which uses existing data to create artificial AIRs, as if they were measured in real rooms. The networks learn properties of the room in the space defined by the parameters of the low-dimensional representation that is proposed in this thesis.Open Acces

NATURAL ALGORITHMS IN DIGITAL FILTER DESIGN

Digital filters are an important part of Digital Signal Processing (DSP), which plays vital roles within the modern world, but their design is a complex task requiring a great deal of specialised knowledge. An analysis of this design process is presented, which identifies opportunities for the application of optimisation. The Genetic Algorithm (GA) and Simulated Annealing are problem-independent and increasingly popular optimisation techniques. They do not require detailed prior knowledge of the nature of a problem, and are unaffected by a discontinuous search space, unlike traditional methods such as calculus and hill-climbing. Potential applications of these techniques to the filter design process are discussed, and presented with practical results. Investigations into the design of Frequency Sampling (FS) Finite Impulse Response (FIR) filters using a hybrid GA/hill-climber proved especially successful, improving on published results. An analysis of the search space for FS filters provided useful information on the performance of the optimisation technique. The ability of the GA to trade off a filter's performance with respect to several design criteria simultaneously, without intervention by the designer, is also investigated. Methods of simplifying the design process by using this technique are presented, together with an analysis of the difficulty of the non-linear FIR filter design problem from a GA perspective. This gave an insight into the fundamental nature of the optimisation problem, and also suggested future improvements. The results gained from these investigations allowed the framework for a potential 'intelligent' filter design system to be proposed, in which embedded expert knowledge, Artificial Intelligence techniques and traditional design methods work together. This could deliver a single tool capable of designing a wide range of filters with minimal human intervention, and of proposing solutions to incomplete problems. It could also provide the basis for the development of tools for other areas of DSP system design

Digital Filter Design Using Improved Artificial Bee Colony Algorithms

Digital filters are often used in digital signal processing applications. The design objective of a digital filter is to find the optimal set of filter coefficients, which satisfies the desired specifications of magnitude and group delay responses. Evolutionary algorithms are population-based meta-heuristic algorithms inspired by the biological behaviors of species. Compared to gradient-based optimization algorithms such as steepest descent and Newton’s like methods, these bio-inspired algorithms have the advantages of not getting stuck at local optima and being independent of the starting point in the solution space. The limitations of evolutionary algorithms include the presence of control parameters, problem specific tuning procedure, premature convergence and slower convergence rate. The artificial bee colony (ABC) algorithm is a swarm-based search meta-heuristic algorithm inspired by the foraging behaviors of honey bee colonies, with the benefit of a relatively fewer control parameters. In its original form, the ABC algorithm has certain limitations such as low convergence rate, and insufficient balance between exploration and exploitation in the search equations. In this dissertation, an ABC-AMR algorithm is proposed by incorporating an adaptive modification rate (AMR) into the original ABC algorithm to increase convergence rate by adjusting the balance between exploration and exploitation in the search equations through an adaptive determination of the number of parameters to be updated in every iteration. A constrained ABC-AMR algorithm is also developed for solving constrained optimization problems.There are many real-world problems requiring simultaneous optimizations of more than one conflicting objectives. Multiobjective (MO) optimization produces a set of feasible solutions called the Pareto front instead of a single optimum solution. For multiobjective optimization, if a decision maker’s preferences can be incorporated during the optimization process, the search process can be confined to the region of interest instead of searching the entire region. In this dissertation, two algorithms are developed for such incorporation. The first one is a reference-point-based MOABC algorithm in which a decision maker’s preferences are included in the optimization process as the reference point. The second one is a physical-programming-based MOABC algorithm in which physical programming is used for setting the region of interest of a decision maker. In this dissertation, the four developed algorithms are applied to solve digital filter design problems. The ABC-AMR algorithm is used to design Types 3 and 4 linear phase FIR differentiators, and the results are compared to those obtained by the original ABC algorithm, three improved ABC algorithms, and the Parks-McClellan algorithm. The constrained ABC-AMR algorithm is applied to the design of sparse Type 1 linear phase FIR filters of filter orders 60, 70 and 80, and the results are compared to three state-of-the-art design methods. The reference-point-based multiobjective ABC algorithm is used to design of asymmetric lowpass, highpass, bandpass and bandstop FIR filters, and the results are compared to those obtained by the preference-based multiobjective differential evolution algorithm. The physical-programming-based multiobjective ABC algorithm is used to design IIR lowpass, highpass and bandpass filters, and the results are compared to three state-of-the-art design methods. Based on the obtained design results, the four design algorithms are shown to be competitive as compared to the state-of-the-art design methods

Sampling from a system-theoretic viewpoint

This paper studies a system-theoretic approach to the problem of reconstructing an analog signal from its samples. The idea, borrowed from earlier treatments in the control literature, is to address the problem as a hybrid model-matching problem in which performance is measured by system norms. \ud \ud The paper is split into three parts. In Part I we present the paradigm and revise the lifting technique, which is our main technical tool. In Part II optimal samplers and holds are designed for various analog signal reconstruction problems. In some cases one component is fixed while the remaining are designed, in other cases all three components are designed simultaneously. No causality requirements are imposed in Part II, which allows to use frequency domain arguments, in particular the lifted frequency response as introduced in Part I. In Part III the main emphasis is placed on a systematic incorporation of causality constraints into the optimal design of reconstructors. We consider reconstruction problems, in which the sampling (acquisition) device is given and the performance is measured by the $L^2$-norm of the reconstruction error. The problem is solved under the constraint that the optimal reconstructor is $l$-causal for a given $l\geq 0,$ i.e., that its impulse response is zero in the time interval $(-\infty,-l h),$ where $h$ is the sampling period. We derive a closed-form state-space solution of the problem, which is based on the spectral factorization of a rational transfer function

Signal processing of EEG data and AI assisted classification of emotional responses based on visual stimuli

This report outlines the research conducted to explore on the topic of classification of human neurological data using machine learning models. The primary objective was to investigate alternative approaches for efficiently interpreting EEG data and test the possibilities for predicting human emotions. During the study, data was collected by recording the brain activity of volunteering respondents using electroencephalography. These participants were exposed to visual stimuli in the purpose of provoking specific neural activity as a result of emotional responses in the brain. The collected data underwent traditional signal preprocessing techniques typically employed in EEG data analysis. Subsequently, the filtered data was subjected to wavelet transformation, both with and without synchrosqueezing. Principal components analysis was used to perform dimensionality reduction on the resulting features extracted from the data. The final model achieved a prediction accuracy of 32% when classifying between eight different classes of emotional responses based on training data from three respondents